Search the record

WALKING ACROSS CONCRETE SLAB THAT HAD A THIN LAYER OF SLICK MUD ON IT, CAUSING HIS FEET TO SLIPE FROM UNDER HIM. HE FELL HURTING NECK.

USING A PRY BAR AT SO CENTRAL SHAKER PRY BAR SLIPPED, HTI LIP, CUTTING LIP AND CHIPPING TOOTH.

USING AN OLD ROLLER TO KNOCK TROUGHING ROLLER OVER TO CLEAR BELT. SHAFT IN RETURN ROLLER WAS LOOSE ADN IT SLID OVER AND PINCHED AND CUT FINGER.

REPAIRING EXHAUST PIPE ON TRUCK. AFTER CUTTING RUSTED OUT SECITON FO TAIL PIPE, HE PULLED OT SEPARATE FROM THE REST OF THE PIPE. AS IT BROKE FREE THE JAGGED EDGE OF THE PIPE HIT HIS LEFT HAN D CAUSING A DEEP CUT.

EMPLOYEE WAS CHECKING LOOSE WIRE ON WELDER, & RIGHT MIDDLE FINGER WAS CUT WHICH REQUIRED SUTURES.

INJURED WAS A PASSENGER IN WELDER TRUCK THAT WAS BACKING UP AT EST. SPEED OF 5 TO 10 MPH. TRUCK BACKED INTO A 10" PIPE, WHICH HIT BOTTOM HUNG TOOL BOX MOUNTED ON UNDERSIDE OF WELDIGN TRUCK BE TWEEN CAB AND REAR WHEELS. UPON IMPACT, THE TRUCK CAME TO A SUDDEN STOP, CAUSING PASSENGER AND DRIVER'S HEAD TO HIT REAR WINDOW OF TRUCK.

EMPLOYEE WAS GRINDING A PIECE OF METAL WITH AN ELECTRIC GRINDER. THE GRINDER HIT A ROUGH SPOT ON THE METAL AND THE GRINDER KICKED BACK AND HIT LEFT KNEE, CAUSING A CUT ON KNEE.

EMPLOYEE OPERATES A DOZER, USES SHOVEL AND OTHER RELATED ACTIVIES TO MOVE MATERIAL. HE FIRST NOTICED NUMBNESS IN LEFT HAND AND WRIST ON 3/6/93. 1ST VISIT TO DR ON 3/14/93, REPORTED TO SUPERVIS OR ON 3/15/93, AFTER REFERRAL TO ANOTHER DR. REPORTED TO EMPLOYER BY SECOND DR AS POSSIBLE WORK RELATED CARPAL TUNNEL SYNDROME.

EMPLOYEE WAS CLIMBING DOWN LADDER OF JAW CRUSHER.

INJURY HAS BEEN CUMULATIVE TRAUMA FROM 7-15-92 THRU PRESENT. ON 7-14-93 EMPLOYEE ADMITTED FOR SURGERY BECAUSE CONDITION DID NOT IMPROVE. EMPLOYEE ALLEGES REPEATED USE OF LEVER ON LOADER CAUS ED UNSPECIFIED CYST. TREATMENT INCLUDES REMOVAL OF CYST.

EMPLOYEE WAS USING HAMMER TO TRACK BELT TO JAW BY HAMMERING RETURN IDLER, WHILE UNDER RUNNING CONVEYOR. AS HE WAS HAMMERING IDLER HIS HAND AND ARM WAS PULLED BETWEEN ROLLER AND BELT.

PULLING AND TUGGING ON CONVEYOR BELT.

LUBING THE DRIVE GEAR ON THE OVERLAND CONVEYOR.

HE WAS REMOVING AIR RAMS DEOM STORAGE SHELF PULLED ONE RAM FROM SHELF AND ANOTHER ONE FELL ON HIS KNEE RESULTING IN CONTUSION OF RIGHT KNEE.

INSTALLING A BUCKET TIP & HAMMERING THE PIN THATSECURES IT. A CHIP OF METAL FLEW OFF, STRIKING THE RIGHT THIGH & IMBEDING IN TISSUE. DOCTOR EXTRACTED METAL & SUTURED WOUND.

PULLING ROCKS OUT OF JAW CRUSHER PULLED A MUSCLE IN HIS BACK.

ADJUSTING FEED FLOW GATES ON PIT SYSTEM WHILE SYSTEM WAS IN OPERATION AND FELL FROM EDGE OF FEEDER ONTO EARTH BANK.

OPERATING 988 LOADER TO FEED PLANT FEEDER IN THE PIT.LOADER TIRE HIT LARGE BUMP LOWER LEFT BACK BEGAN TO HURT.

HE WAS USING A ROD TO REMOVE ROCKS THAT WERE JAMMED UP IN THE ROCK CRUSHER.

HE WAS CHANGING SCREEN ON PIT SHAKER.HE HAD TO BEND THE SCREEN TO GET IT INTO PLACE.THE SCREEN POPPED UP,HIT HIS RIGHT HAND,CUTTING HIS HAND.

HE WAS CLEANING THE CRUSHER & SAND BLEW INTO HIS EAR.

STANDING ON SAND BOOM,A TROFFING ROLLER WAS BEING LOWERED DOWN ON A ROPE TO HIM.ROLLER HUNG UP ON BEAM SWING AND SMASHED I.NAME FINGER BETWEEN ROLLER AND HANDRAIL.

HE WA GREASING JAW CRUSHER AND GRIZZLY, SLIPPED ON LADDER WHEN CLIMBING DOWN AND HURT BACK.

CLIMBING DOWN LADDER OF JAW CRUSHER WITH GREASE GUN IN HAND,SLIPPED AND FELL OFF LADDER ONTO GROUND INJURING HIS BACK.

HE WAS PULLING ON BELT & STRAINED BACK.