Mining Incidents

Search the record

Every injury and fatality MSHA has on file. Filter by state, year, sector, classification, experience, or any keyword from the investigator's narrative.

Total incidents
273,193
Of which fatal
1,202
Years on record
2000–2026
Classifications
20
Filters 2 active
Time period
Experience at time of incident

Alert me on this search

Email me when a new incident matches these filters. One confirmation email; unsubscribe anytime.

The record

11 matching records

Showing all 11
July 8, 2025 MO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
S-S-S Inc · Over-exertion in lifting objects

While standing, individual attempted to lift a 4x8' sheet of plywood from chest height to overhead position. Plywood had dirt on it making it heavier than anticipated. Extra exertion caused a pulled muscle under left scapula around to under left pectoral muscle. Co-worker immediately checked individual for any sign of back injury before returning to the office to report incident.

November 16, 2023 MO · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
S-S-S Inc · Caught in, under or between a moving and a stationary object

Employee was checking battery cable connections on track hoe that would not start. EE lifted the battery box lid with EE's right hand. the box lid slammed shut onto EE's left thumb, just below the thumb nail.

August 15, 2017 MO · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
S-S-S Inc · Over-exertion in pulling or pushing objects

Employee was bending over a table/workbench pulling a large gear toward self. Employee felt pain in lower back and leg. Pain increased with time. The employee used a sledge hammer after feeling pain.

September 6, 2012 MO · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
S-S-S Inc · Caught in, under or between a moving and a stationary object

Employee was changing hydraulic cylinder on the quarry dump truck. As the cylinder was remove, it caught the employees right pinky finger between cylinder and the truck's fuel tank.

February 7, 2008 MO · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
S-S-S Inc · Struck against stationary object

Employee was drilling with electric hand drill throuhg a truck mounted toolbox when employee's hand contacted a sharp piece of metal and cut his hand.

May 29, 2007 MO · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
S-S-S Inc · Struck by... (Not Elsewhere Classified)

Employee had a lit cigarette in his mouth. He was wearing a work vest. He was attempting to stop a slowly rolling pickup truck. Upon entering the truck, the vest flipped the burning cigarette up into his right eye.

April 5, 2005 MO · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
S-S-S Inc · Over-exertion (Not Elsewhere Classified)

Employee was getting out of haul truck. He climbed down a ladder when right foot touched the ground. he turned and twisted right ankle.

February 12, 2001 MO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
S-S-S Inc · Struck against stationary object

EE WAS INSTALLING AN AIR HORN ON THE SAND DREDGEWHEN HE LEANED INTO AN OVERHEAD CONDUIT BRACE & CUT HIS HEAD. HE REQUIRED 5 STITCHES TO CLOSE THE WOUND. HE RETD TO FULL DUTY THE NEXT DAY

January 22, 2001 MO · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
S-S-S Inc · Struck by falling object

EE WAS TRYING TO LOWER A CONVEYOR BELT BY CUTTING THE SUPPORT BEAM OFF, SUPPORTING THIS BEAM WITH A PROP & THEN REMOVING THE PROP TO ALLOW THE SUPPORT BEAM TO FALL 6' TO THE GROUND. AS HE WAS REMOVING THE PROP, THE BEAM & PROP BOTH FELL TO THE GROUND & ONE OF THEM STRUCK HIM IN THE LEFT HIP AREA.

May 1, 2000 MO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
S-S-S Inc · Caught in, under or between a moving and a stationary object

EE WAS REMOVING 1/2 LINK FROM A CHAIN WHEN THE CHAIN SLIPPED AND HIS FINGERS FROM BOTH HANDS WERE CAUGHT BETWEEN THE CHAIN AND THE SPROCKET. A TOTAL OF SIX FINGERS WERE BRUISED AND/OR CUT. EE DID NOT HAVE ANY BROKEN BONES NOR DID HE REQUIRE ANY STITCHES.

March 27, 2000 MO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
S-S-S Inc · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS LYING IN A PRONE POSITION WORKING ON REPLACING TWO SIZING SCREENS WHEN HIS LEFT FOOT BECAME CAUGHT BETWEEN TWO SCREEN SUPPORTS. IN THE PROCESS OF TRYIN GTO FREE HIS BOOT, HE TWI STIGED HIS LEFT KNEE OUT OF JOINT. EMPLOYEE HAD SURGERY TO REPAIR LEFT KNEE IN 1990 AND STATED THA KNEE HAS DISLOCATED SEVERAL TIMES SINCE AT HOME.

Showing all 11