Every injury and fatality MSHA has on file. Filter by state, year, sector, classification, experience, or any keyword from the investigator's narrative.
Employee was removing jackhammer from catwalk approx 6ft high. As the employee pulled the jackhammer down to the ground level, the jackhammer oiler struck the employee in the mouth, causing a chipped tooth.
September 4, 2014TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Laceration caused during smash by large metal plate to right pinky finger, palm side.
December 9, 2013TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EE was attempting to climb onto an equipment(TA-40). Weather conditions were icy, wet, and cold. As he attempted to climb on equipment his foot slipped on the stirrup and he caught himself on the rails to prevent him from falling. He heard something pop in his right shoulder.
August 3, 2012TX · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorHANDLING OF MATERIALS
Holcim (Texas) LP · Caught in, under or between a moving and a stationary object
Employee was returning from getting water in Maintenance Office. Upon re-entering the loader cab he put his right hand where door closes and utilized his left hand to shut the door. He thought he could move his right hand before the door shut. The door shut on his right middle finger. He reopened the door and removed his finger.
EE was assisting another ee in shoveling material from a hopper that had stopped up with material. As he shoveled material he felt pain in his right shoulder.
August 12, 2011TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Employee was moving metal disk weighing about 300 lbs by rolling it on edge. The disk fell over and struck employee on outside of left foot. Sustained "Jones fracture" to fifth metatarsal.
August 3, 2008TX · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDLING OF MATERIALS
Holcim (Texas) LP · Caught in, under or between a moving and a stationary object
Employee was attempting to use magnetic block to reset switch on BMH reclaimer, when reclaimer was moved by another employee and caught employee's finger between sensing block and rail block. Right fingernail evulsion and laceration. Employee treated and released. NO LOST TIME.
February 20, 2008TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
Holcim (Texas) LP · Caught in, under or between a moving and a stationary object
Employee was pushign brick on conveyor. He trapped his right index finger between two bricks and sustained a crush/pinch injury to the finger tip and nail.
October 23, 2006TX · Metal/Non-Metalquality control technician, laboratory technician, laboratory assistantHANDLING OF MATERIALS
EMPLOYEE DROPPED A 5-GALLON BUCKET CONTAINING SAMPLE DISCARDS THAT WEIGHED ABOUT 50 POUNDS. HE TRIED TO CATCH THE BUCKET BEFORE IT HIT THE FLOOR AND IN DOING SO STRAINED HIS LOWER BACK. LATER IN THE DAY HE REQUESTED MEDICAL EXAMINATION. TREATING PHYSICIAN DIAGNOSED A LUMBAR STRAIN AND PRESCRIBED MEDS AND PHYS THERAPY.
September 28, 2006TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
A cooler had broken down. They were passing 5 gallon buckets full of material from person to person. EE said he grabbed a bucket and turned too hard to hand it to the next guy. He felt a pain in his right groin area.
May 24, 2006TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
Employee was installing overhead grate and stretched a muscle in his upper back. He was placed on restricted duty for three days.
December 15, 2005TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Employee was working in raw mill with dusty work environment, did not notice any problem until he woke up the next day with irritated right eye. Employee was examined by clinic physician and a dust particle was removed from the surface of the eye.
November 1, 2005TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Holcim (Texas) LP · Caught in, under or between a moving and a stationary object
Employee was attempting to slide a metal panel when the corner slipped and pinched his fingertip. He reacted by pulling his finger away which caused a laceration on the fingertip. The laceration required two sutures to close.
September 6, 2005TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Employee was leaning over a wheelbarrow cleaning next to a tall pallet of bricks when one of four bricks fell from top of stack & struck him in lower back.
Employee claims that on or about 5/27/05, he lifted and held a section of grating at the Line 1 Scrubber Pit with his left arm while cleaning out the material with his right hand and arm. During this process, employee claims he felt a sharp pain in his left arm. Employee did not report injury until 6/29/2005.
May 1, 2005TX · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDLING OF MATERIALS
Employee was shoveling material out from under 311-BC1 belt conveyor when he claims he struck a secured bolt with his shovel, causing his right wrist to hyperextend. Employee did not report injury until he felt initial pain on 05/04/2005.
April 19, 2005TX · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDLING OF MATERIALS
Employee claims he was getting set up to cut wood on the welding table in the maintenance shop. When he set circular saw on welding table, an 8' x 2', 1/2" thick piece of steel that was sitting on the welding table fell on the top of his left foot. The piece of steel was hanging off welding table and the weight of the saw was enough to drop steel off table.
March 19, 2005TX · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDLING OF MATERIALS
Employee claims he injured his upper back and neck while shoveling rock around the 311-BC1 belt. Employee reported the soreness to his supervisor on 3/26/2005 and requested medical attention on 4/04/2005.
January 19, 2005TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
EE WAS CLEANING UP IN THE KILN WHEN HE RECD. SOME TRASH FROM HIS COWORKER WHICH WAS BEING PASSED UNDER THE KILN RIG WHERE A PALLET OF BRICKS WERE. THE TRASH THAT WAS BEING PASSED TO EE SNAGGED ON A BRICK CAUSING IT TO FALL APPROX. 4 FT., STRIKING EE'S RT. FOOT CAUSING HIS 4TH DIGIT TO RECEIVE A LACERATION AND A FRACTURE. EE IS STILL UNDERGOING CARE WITH ORTHOPEDIC SPECIALIST.
December 15, 2004TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
He was working on the tower using a jack hammer and a bar. the bar was inside the door on the tower and he reached for the jackhammer to put it on the bar and he felt a pain in his back.
August 30, 2004TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
EMPLOYEE WAS LIFTING A LARGE PIECE OF SHALE FROM CONVEYOR BELT (320 RE1). WHEN HE TURNED TO LAY IT DOWN, HE STRUCK A MOTION SENSOR CAUSING A PUNCTURE TO THE CENTER OF HIS RIGHT SHIN.
EE WAS GRINDING ANGLES WITH HAND GRINDER. ALL PPE WAS WORN. WHEN EE COMPLETED TASK, HE REMOVED FACE SHIELD AND SOME METAL SHAVINGS FELL BEHIND SAFETY GLASSES INTO LEFT EYE.
September 4, 2003TX · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDLING OF MATERIALS
INSTALLING FIRST LEVEL OF NEW STRUCTURE AND REACHED OUT TO STABILIZE LOAD. FELT A TWINGE IN NECK AND NECK GOT STIFF OVERNIGHT.
January 25, 2003TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EE WAS SHOVELING COAL AND DIRT WHEN HE FELT A PAIN IN HIS UPPER BACK.
March 22, 2002TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Holcim (Texas) LP · Inhalation of radiations, caustics, toxic and noxious substances
LINE 1 SCRUBBER TOWER WAS PROPERLY ISOLATED FROM PROCESS GAS (KILN EXHAUST GAS) IN PREPARATION FOR OPENING THE MANDOORS TO VISUALLY INSPECT THE DEMISTING PADS FROM THE OUTSIDE OF THE VESSEL. THERE WAS QUITE A BIT OF STEAM COMING FROM THE MANDOOR. THE UPPER DAMPER WAS OPENED IN A EFFORT TO CREATE A DRAFT AT THE DOOR AND CLEAR THE STEAM, SUFFERED ASTHMA ATTACK.
February 12, 2002TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EE DOES NOT RECALL WHEN HE BUMPED HIS LEG. HE NOTICED SWELLING ABOUT 2 HOURS BEFORE HE REPORT-ED THE INCIDENT.
February 10, 2002TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Holcim (Texas) LP · Caught in, under or between a moving and a stationary object
TWO EMPLOYEES WERE CARRYING A METAL PLATE. WHEN THEY LOWERED IT TO THE GROUND, ONE LET LOOSE OF THE PLATE AND THE OTHER DID NOT GET HIS HAND OUT QUICKLY ENOUGH, TRAPPING HIS LEFT THUMB BETWEEN THE PLATE AND METAL DECK.
May 25, 2001TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS