Search the record

EMPLLOYEE WAS OPENING WINDOW IN THE SHOP, HE PUSHED ON THE GLASS. THE GLASS BROKE NAD CUT HIS RIGHT FOREARM.

EE WAS OPENING A NEW WINDOW THAT WAS IN A BIND AND HURT HER HAND.

BLASTER WAS FASTENING HOSE TO BULK AN/FO TRUCK USING BOTH HANDS TO FASTEN KAM-LOCKS TO SECURE HOSE. HOSE SLIPPED FROM THE FEMALE KAM-LOCK HITTING THE WORKER IN THE MOUTH.

EE STATED THAT HE HAD BEEN HELPPING TO LIFT A TRANSFORMER & PULLED A MUSCLE. EE REFUSED TREATMENT UNTIL 2/19/97.

EE WAS HELPING TO MOVE A COMPRESSOR WHEN HE STRAINED HIS GROIN.

EE WAS GOING UP THE LADDER OF HIS PIT TRUCK WHEN HE FELT A PAIN IN HIS BACK.

EE WAS LIFTING THE COVER OFF OF THE BOOM AND INJURED HIS BACK. THIS IS REPORTABLE BECAUSE HE WAS ON LIGHT DUTY

EE WAS TRYING TO LIFT A 14" X 14" X 3' WOOD BLOCK USED FOR CRIBBING. HE WAS TRYING TO LIFT BLOCKBY HIMSELF. HE SAID HE FELT HIS LOWER BACK PULL A LITTLE. EE REFUSED TREATMENT. ONE WEEK LATER H E WENT TO DR. & WAS PLACED ON LIGHT DUTY FOR 1 WEEK. THIS IS A REACURRENCE FROM AN INJURY THAT OCCURED AT HOME 3 YRS PREVIOUS.

EE WAS CHANGING OUT SCREEN CLOTH ON TERTIARY SCREEN. WHILE REMOVING SCREEN MEDIA EE CAUGHT HIS RING FINGER OF LEFT HAND BETWEEN SCREEN CLOTH & SAFETY HANDRAIL ON CATWALK.

EE STATED THAT HE WAS WORKING ON THE BOLTER WHEN SOMETHING FLEW IN HIS EYE.

WHILE MOVING OIL DRUMS AND POWER CABLE, HE SPRAINED HIS BACK. THIS IS A RECURRENCE OF AN OLD INJURY.

EMPLOYEE WAS LEANING OVER THE HEAD BOX ON #4 CONVEYOR, FLIPPED THE GATES FOR A CHANGE-OVER WHEN HE STRAINED HIS BACK.

EE WAS MOVING A GUARD FROM 4 TAIL PULLEY. WHEN EE WAS TURNING AWAY FROM THE GUARD HE FELT A POP IN HIS KNEE.

CHANGING SCREEN CLOTH AND WAS LIFTING A CLOTH ONTO THE SCREEN AND BACK STARTED HURTING. EMP HAS A BACK PROBLEM FROM A PREVIOUS INJURY AT ANOTHERPLANT. THIS IS AN AGGRAVATION OF A PREVIOUS INJU RY.

EE WAS REMOVING ROLLERS AND REINJURED LOWER BACK.

EMPLOYEE WAS PUTTING A 100 LB COUNTER WEIGHT ON #13 CONVEYOR TAKEUP. ANOTHER EMPLOYEE SLAMMED THEIR END DOWN CAUSING WEIGHT TO SMASH HER FINGER.

EE WAS PULLING A GATE AT 2 HEADBOX WHEN HIS LOWER BACK STARTING HURTING.

EE PULLED ROOF BOLTS OUT OF THE ROOF BOLT CARRIER ON THE ROOF BOLTER AND HE PULLED A MUSCLE IN HIS BACK.

EE WAS PUTTING ON HIS OVERHAULS AT WORK AT THE BEGINNING OF HIS SHIFT. WHEN HE BENT OVER AND STOOD BACK UP. HE GRABBED HIS BACK AND SAT DOWN. AT 7AM HE SAID HIS LOWER BACK WAS HURTING BADLY AND NEEDED TO SEE A DR. HE WENT TO HIS CHIRO AT 1009 (LEFT WORK). DR HAS HHIM ON LIGHT DUTY FOR ESTIMATED 2 WKS. B1U SAID THAT HHIS BACK HAD BEEN BOTHERIN GHIM PREVIOUSLY SINCH AN ACCIDENT

EMPLOYEE WAS PUTTING A FLOOR PLATE IN PLACE, LEG GOT CAUGHT BETWEEN FLOOR PLAT AND I-BEAM.

EMPLOYEE WAS HOLDING ONTO A ROPE TO KEEP FROM BRAKING. THE CHUTE CAME LOOSE AND PULLED HIS ARM.

EE WAS REMOVING DRIVE SHAFT WHEN HIS HAND SLIPPED ON GREASE. HIS HAND WENT IN BETWEEN THE DRIVE SHAFT AND DIFFERENTIAL YOKE. THE DRIVE SHAFT FELL AND SMASHED HIS THUMB.

EE WAS PULLING THE BELT CLAMP UP THE BELT & SMACKED HIS RIGHT ELBOW ON SINGLE POST FOR CABLE. FROM HIS ELBOW TO HAND WENT NUMB & HE LOST STRENTH & HAS CONSTANT PAIN AND BURING IN ELBOW.

EE WAS PULLING WATER HOSE OVER AN UNLEVEL SURFACE EE LOST HIS FOOTING & FELL THE WATER HOSE WAS ON AT THE TIME & SLIPPED OUT OF EE HAND & HIT HIM IN THE TESTACLES

2 EMPLOYEE WERE CHANGING SCREENS ON 8 X 20 SHAKER. INJURED PICKED UP HIS SIDE OF THE SCREEN AND HAD A SHARP PAIN IN HIS GROIN AREA. AFTER THAT, IT REDUCED TO A DULL ACHE.

EE WAS PULLING WATER HOSE UP THE SHORTHEAD DECK. THE HOSE WAS STUCK IN MUD.

EE WAS PULLING A PLATE SCREEN AWAY FROM THE WALL. THE SCREEN SLIPPED OUT O HIS HAND AND IT PULLED HIS FINGER INTO THE WALL & SMASHED IT.

EE WAS HELPING OTHER YELL ANOTHER SWAFFORD SHIFT A 1/4"X4'X8' PLATE AROUND ON WELDING TRUCK WHEN HE FELT A SHARP PAIN IN HIS RIGHT SHOULDER.

PINCHED RIGHT INDEX FINGER WIPING GREASE OFF WALKING CLUTCH ON 9W DRAGLINE.

EMPLOYEE WAS FINISHING JOB OF CHANGING SCREENS ON #4 SCREEN. HE AND ANOTHER EMPLOYEE WRE PUSHINGON A STEEL PLATE TO SWING IT SHUT. EMPLOYEE LOST HISFOOTING AND WITNESS COULDN'T HOLD IT BY HI MSELF. THE PLATE FELL OPEN HITTING INJURED'S LEFT FINGER. THE FINGER GOT SMASHED BETWEEN THE PLATE AND A HAND RAIL.

EMPLOYEE WAS BENDING OVER PUSHING A 10" X 36" PIPE ON THE SHOP FLOOR WHEN HE FELT A SHARP PAIN IN HIS GROIN AREA.

EMPLOYEE LIFTED SCREEN CLOTH AND PULLED HIS BACK GOING UP AND DOWN THE STAIRS.

HE WAS GUIDING SCREEN CLOTH INTO BACK, BOTTOM DECK OF SHAKER. HE WAS USING BOTH HANDS TO PULL THE SCREEN CLOTH IN WHEN THE CLOTH SLIPPED OUT OF HIS LEFT HAND AND PINCHED HIS RIGHT THUMB BETWEE N SCREEN CLOTH AND HOLE OF SHAKER.

INJURED WAS PUTTING NUTS & WASHERS ON BOTTOM SCREEN FROM LOWER SIDE. HE SLID DOWN PAN TO GET TO THE BOLT & BACK OF LEG GOT CAUGHT ON ANGLE IRON. THOUGHT IT WAS JUST A SCRATCH & CONTINUED W/HIS JOB. AFTER GETTING OUT OF PAN HE NOTICED HIS PANTS AND LEG WAS WET AND HE SAW THERE WAS BLOOD ON HIS LEG & PANT.

WORKING ON PUMP PONTOON, EE CLIMBING DOWN INTO THE CENTER OF PONTOON WHEN THE STEEL ELBOW HE WAS HOLDING GAVE WAY HE PUSHED HIMSELF OUT OF THE WAY AND PULLED MUSCLES 1" SHOULDER/BACK.

EE WAS REMOVING LINER FROM CHUTE PLATE WHEN IT FELL BACK ON HIS HAND.

EE WAS CHANGING A PULLEY ON A BELT WHEN A PIECE OF MUD FELL, HITTING HIM ON HIS HARD HAT, AND GETTING A PIECE OF CHART AND STEEL IN HIS EYE.

EMPLOYEE WAS ALIGNING ELJAY SCREEN, USING LOFT 1/2 CHAINS WHILE CARRYHING CHAINS FROM ONE FLOOR TO ANOTHER AND PULLED MUSCLES IN LOWER BACK.

EMPLOYEE WAS WORKING IWTH FLOOR BEAMS & HIS FINGER WAS CAUGHT BETWEEN TWO OF THEM.

PUTTING NEW V-BELTS ON CRUSHER. EMPLOYEE WAS USING HIS LEFT HAND TO ROTATE CRUSHER. HE SAID HIS GLOVE MUST HAVE GOTTEN CAUGHT ON PIECE OF WELD AND PULLED HIAS HAND DOWN AGAINST CRUSHER SIDE IN JURING HIS LEFT THUMB.

EE WAS LIFTING ONE END OF A PIECE OF STEEL 20"X96"X1/2" TO MOVE IT OUT OF THE WAY. TO KEEP FROM SETTING IT DOWN ON HIS TOE S HE MOVED HIS FEET BACK. WHEN HE DID THIS HE HAD A BURNING PAIN IN T HE LEFT SIDE OF HIS LOWER BACK.

EE WAS LOADING AN EXYGEN BOTTLE ON THE WELDING TRUCK WHEN THE PASE OF THE TANK SLID ON THE ROCK AND THE TOP PART OF THE TANK FELL TOWARD THE TRUCK SMASHING HIS FINGER BETWEEN THE TANK AND THE TRUCK.

ROCK WAS WEDGED IN THE BOTTOM OF THE 310 HOPPER. WITH THE DESIGN OF HOPPER, THE ONLY WAY YOU CAN GET TO THE ROCKS IS TO CRAWL INSIDE HOPPER. THE ROCK SHIFTED AND SLIPPED OUT OF MY HANDS, SMASH ING MY FINGER BETWEEN THE ROCK AND A PIECE OF STEEL.

EMPLOYEE WAS HELPING LOAD A 12" PIPE ONTO A FLATBED LOWBOY TRUCK, HE HAD TWO CHAINS CHOKED ON BOTH ENDS OF PIPE. WHILE LIFTING THE PIPE, THE CHAIN SLIPPED AND THE PIPE DROPPED JERKING HIS LEFT ARM, LEAVING IT STRAINED .

A ROCK HUNG BETWEEN BELT AND WIPER AT COBBLE HEAD SECTION. HAD BELT BUCKLED, SHUT OFF DREDGE AND COBBLE CONVEYOR AND MUD PICKING BELT. DISLODGED FLAT ROCK WHEN TENSION FROM MUD PICKING CONVE YOR CAUSED ROCK TO MOVE UPWARD PINCHING FINGER BETWEEN ROCK AND COBBE HOPPER.

EE WAS WORKING ON 6X18 SCREENCHANGING A BEARING. HIS HAND SLIPPED AS HE WAS PULLING OFF BEARING HOUSING, RESULTING IN LACERATIONS OF TWO FINGER S ON HIS LEFT HAND.

EE WAS RUNNING CUTTING EDGE AROUND & BLOCK OF WOOD SLIPPED OUT FROM BUCKET & PINNED HIS HAND BETWEEN BUCKET & FLOOR OF SHOP.

EMPLOYEE WAS ATTEMPTING TO CLOSE A CHUTE DOOR (6" X 3") WITHOUT ASSISTANCE. HE FELT A POPPING SENSATION IN HIS RIGHT SHOULDER.

WHILE EE WAS LOOKING THROUGH DRAWERS INTOOL CABINET A 48IN PIPE WRENCH WHICH HAS SETTING UPRIGHT LEANING AGAINST THE SIDE OF TOOL CABINET FELL & LANDED ON HIS LEFT FOOT BREAKING HIS LITTLE TOE

EMPLOYE EWAS HLEPING REMOVE A 70 TO 80 LB JACKSHAFT FROM PRIMARY FEEDER DRIVE ASSEMBLY. IN PULLING SHAFT OUT HE HAD HIS LEFT THUMBS INSIDE OF SHEAVE. WHEN SHAFT DROPPED IN SMASHED HIS THUMB