Search the record

Employee was walking towards the centerline during shift change using the designated path to the ladder. As they were walking towards the ladder the employee noticed that the pathway sloughed causing the employees left leg to sink up to the knee. This position caused the employees ankle to experience discomfort. The employee went restricted duty 5/5/2026.

A Shovel/Drill employee was removing snubber pins to perform a re-shim of the snubber. While using a digging bar to drive out the pins, the pin suddenly released, causing the snubber to drop. This resulted in the employee's left pinky finger being pinched between the dipper bore and the digging bar. Employee was given restrictions on 4/25/2026.

Employee reported that dust entered under their safety glasses flushed their eyes using an eyewash bottles. The employee declined medical evaluation at the clinic at the time. With continuing issues, the employee was later evaluated and given prescription eyedrops.

Employee was squatting down tying mantos to 4" pipe on a leaching stockpile, when they fell foreword hitting right knee and elbow on rock. Employee felt pain in both areas and reported it to supervisor.

An employee was operating a drill press in the maintenance shop when metal shavings became lodged in the equipment. The employee stopped the drill press and attempt to manually remove the obstruction, and a sharp metal shaving penetrated the glove and caused a laceration to the employee's left index finger. The employee received stitches for their injury.

Employee was rolling up mantos on a leach stockpile, when their right forearm became irritated by the raffinate solution. The employee wash off arm with 4 bottles of water and reported incident to supervisor. The employee was taken to clinic to be evaluated.

Mill Crusher Ops employee was making their rounds this morning checking all the unit screens at the Secondary Crusher, employee went to close the "doghouse" door and smashed their middle finger.

A Morcon ops employee was washing off material behind the ball mills area when they took a break. Upon returning from the break they went to bend over to pick up the water hose to continue spraying down area when they felt a pain in their back.

While employee was cleaning up debris in a 90 degree pipe. A rock dislodged and stuck employee on right hand.

The employee had noticed red on the under part of their eyes 2/18/2026 at the end of their shift and over the next couple of days a rash appeared and on 3/4/2026 the employee reported the injury when coming back to work due to the condition not improving.

Employee was unloading a hose crimping machine and hit EE's left index finger on something and created a laceration.

Employee sustained a laceration to right hand ring finger when it was cut by a burr on the inside of the drill pipe and received 5 sutures. Employee identified one of the burrs, but not the second. EE had Impact Cut 5 gloves on at the time of occurrence.

During a maintenance activity, a maintenance employee was replacing some dust collector ducting in the tunnel when they pinch their right index finger.

Employee was picking up parts for their task and one of the required parts the employee needed was a cylinder for the dust curtain on the drill. While lifting the cylinder, the employee stood upright and experienced a sharp pain on the left side of the body.

While walking through the mud, the employee's feet became stuck. During an attempt to free themselves, they felt a pop in their left knee.

Water hose nozzle struck employee in chin, chipping 2 teeth, cracking 1 tooth and causing a laceration which required 3 stitches.

Employee was cleaning the Dc box for the ball mill when they felt something fall between their glasses. Employee felt like something got in their eye and started to flush them out.

Employee was lifting 50-pound bucket, when they felt a pull in their abdomen. There was no pain, so employee continued working. Employee noticed a bump after they went home. Employee reported it the following morning start of shift. incident occurred at the Lone Star array site.

Operator of a haul truck fell while cleaning windows on the truck deck, striking their right wrist against the windshield. Received work restrictions on 12/29/2025.

Mechanic sustained a hand laceration while replacing air filters on haul truck within the bay.

While walking to the HT629 at Shannon Q-Point, the dayshift operator tripped on a rock and fell forward. At the time of incident, the operator was wearing their backpack, carrying a water bottle and an additional bag full of cleaning supplies. The operator stated they normally use a flashlight while walking but were not at the time of this incident

Employee smashed finger - became reportable 11/25/2025

Employee injured finger when shroud material fell onto it

Employee was hit by 25lb bucket - became reportable 10/20/2025

Employee injured knee going up stairs

While lifting an oil pan onto a 793 haul truck engine, employee felt a pop in EE's groin area. The employee reported the incident later in the shift. EE was treated as a first aid from 9-25-25 to 10-16-25 when EE was given restrictions.

Employee picked up cribbing and felt pop in back

Employee felt pop in shoulder lifting 50 lb bag of clay

Employee smashed hand with drive line guard - Restrictions received same day of injury prior to next night shift.

Employee fell onto idlers injuring leg - became reportable on 8/11/2025

Employee received bruising on foot from lock ring striking it - became reportable 7/25/2025

The driver grabbed the stinger and as they moved it, right ring finger became pinched between the stinger handle and the guard rail of the gangway basket.

Employee misplaced hand and smashed finger

Employee were working on 901 feeder when separating the unit with a ram the unit roller causing the ram to pop as the employee was walking away something hit EE's PARP as EE turned EE's back causing the PARP to scratch EE's forehead

Employee was bolting up a cover for the NGR behind the transformer. It started to slide down. EE tried to stop it and EE's had was struck by the corner on the Handle.

While attempting to place a heavy object in the bed of a truck, the load shifted and pinched employees finger between the bed and the item itself. The injury sustained caused by the weight of the item was a pinch. The pinch caused a laceration requiring four stitches

Employee was struck by idler.

The employee was assisting co-workers with reeving a lower block. During this task, the employees were removing the slack from the wire rope by hand. The wire rope had a twist in it that came loose and made contact with the employee while removing the slack by hand. The incident resulted in a minor chip to the employee's front tooth.

Injured employee was assisting another employee with emptying a core sample from an innertube. The co-worker was handling the innertube and lost grip causing it to fall. The injured employee reacted and tried to catch it and pinched their finger between the innertube and core tray, causing a laceration to their left middle finger requiring 6 stitches.

Employee was shoveling when they felt pain in leg - became reportable on 5/9/2025

Employee smashed finger in door

Employee cut finger between door and door jam - did not become reportable until 4/24/2025

Employee was getting mill liners ready for installation, when it slipped and pinched their finger.

Contract employee was handing scaffold parts into the vessel at the CLP. There was some dust that got into EE's eyes from the parts as EE handed it to another employee. EE's left eye became red and irritated

Employee felt pop in back - injury became reportable 4/1/25

Employee injured back trying to get a bar unstuck

Employee hurt forearm lifting pipe

Employee injured foot trying to unhitch light plant

Employee got dust in eye

Employee suffered minor burns after coming in contact with diluted lime water