Search the record

EE WAS TRYING TO FREE AND DUMP A LOAD OUT OF A DUMP TRUCK WHEN THE MATERIAL DISCHARGED FROM THE TRUCK A PIECE OF PIPE STRUCK HIS RIGHT INDEX FINGER.

EE WAS USING A PRY BAR TO OPEN A DOOR TO A SPILLAGE HOPPER EE FELT A STRAIN IN HIS BACK WHEN EXERTING PRESSURE ON THE PRY BAR.

HE REMOVED SOME BOLTS WHICH REQUIRED HIM TO LEAN ON HIS ELBOWS FROM TIME TO TIME. ON 1-12-91, HE NOTICED SOME REDNESS AND SWELLING IN HIS RIGHT ELBOW.

EE STRUCK HER RIGHT INDEX FINGER WITH A 20 LB HAMMER WHEN ATTEMPTING TO HIT A KEY INTO A KEYWAY.

HE WAS CLIMBING UP AND DOWN EQUIPMENT AND SWINGING A HEAVY HAMMER. HE FELT PAIN IN HIS RIGHT SHOULDER.

MECHANIC WAS TIGHTENING ALTERNATOR DRIVE V-BELT USING A SMALL PRY BAR. WAS USING HIS SHOULDER TO HOLD BAR WHILE TIGHTENING BOLTS. FELT PAIN ON RIGHT SIDE UNDER RIB CAGE WHEN HE PUT PRESSURE ON THE BAR WITH SHOULDER.

REMOVING CONDUIT IT SPRUNG BACK CATCHING R LITTLE FINGER BETWEEN CONDUIT AND BEAM

EMPL RIGHT ELBOW BECAME SORE AFTER USING SLEDGE HAMMER.EMPL REQ MEDICAL ATTENTION 5-18-90.

EMPLOYEE PUNCTURED HIS HAND WITH A METAL ROD.

MECHANICS WERE DRIVING A BUSHING IN THE END OF A SCREW. THE SLEDGE HAMMER HEAD CAME OFF STRIKING MECHANIC IN UPPER LEFT LEG. AFTER ACCIDENT, EMPLOYEE WORKED EVERY DAY UNTIL 11-8-89 WHEN HE WEN T TO THE DOCTOR.

EMPL WAS CUTTING ST5RAP WITH PCIKET KNIFE & CUT LEFT FOREARM.

EMPLOYEE ST RUCK HIS LEFT INDEX FINGER WITH A HAMMER WHILE ATTEMPTING TO HIT A PIECE OF STEEL CAUSING A LACERATION & SMALL FRACTURE

EMPLOYEE DEVELOPED TENDONITIS IN HIS RIGHT HAND

EMPLOYEE STRUCK HIS THUMB WITH A HAMMER RESULTING IN A LACERATION.

EMPL WAS CHANGING A BEARING ON BELT CONVEYOR HEAD DRUM HE HAD THE DRUM HANGING WITH 2 COME-A-LONGS WHEN THE DRUM SHIFTED AND CAUGHT HIS HAND UNDERNEATH IT CAUSING A CONTUSION TO HIS HAND

EMPL CUT HAND WHEN WRENCH SLIPPED & HAND HIT AGAINST DOOR PANEL WHICH RESULTED LATER IN INFECTION.

EMPL CLAIMS HE STRAINED BACK WHILE CLEANING OUT SPIKE ROLL.

EMPL WAS SHOVELING LOOSE MATERIAL INTO A LUGGER BOX WHEN SOM MATERIAL BECAME AIRBORNE AND ENTERED HIS L EYE

A WRENCH SLIPPED WHILE EMPLOYEE WAS TIGHTENING A BOLT WHICH CAUSED HIS ARM AGAINST A SHARP BLADE WHICH LACERATED HIS ARM.

EMPLOYEE RECEIVED A CUT ON TOP OF HIS HAND WHEN HE RELEASED PRESSURE ON A COME-ALONG. THE HANDLE SLIPPED AND FORCED HIS HAND AGAINST A STEEL BAR.

EMPL WAS USING A PRY BAR TO LOOSEN A BELT WHEN THE BAR SLIPPED CAUSING THE EMPL TO HIT HIS ELBOW AGAINST A METAL HAND RAIL

EMPLOYEE WAS HOLDING BAR ON ROCK ANOTHER EMPLOYEE HIT BAR WITH HAMMER DISLODGIN ROCK ORE FELL DOWN ON BAR PULLING IT THROUGH THE HOLE IN IRON PALTE AND CATCHING EMPLOYEES FINGER BETWEEN BAR AN D PLATE

EMPLOYEE COMPLAINING OF SORENESS IN HIS ELBOW AFTER BUMPING AGSAAINST METAL FRAME. HE WAS TIGHTENING A BOLT AND BOLT BROKE. WITHIN THE NEXT 2 DAYS HIS ELBOW DEVELOPED SWELLING.

EMPLOYEE CLAIMS HE FELT A POP IN HIS WRIST WHILE TURNING A WRENCH AND THE WRENCH SLIPPED.

USING VICE GRIPS THEY SLIPPED AND HIT INDEX FINGER CASUING CONTUSION.

EMPLOYEE HIT HI8 FINGER WITH A STAPLING HAMMER CAUSING A PUNCTURE WOUND AND CONTUSION

A NAIL IMBEDDED3INTO EMPLOYEES HAND WHEN IT GLANCED OFF OF A BLOCK OF WOOD

EMPL WORKING ON3RACHET AT SHOP TABLE REPLACING SNAP RING SCREWDRIVER SLIPPED.

EMPLOYEE WAS US3NG PICK TO LOOSEN DIRT AT FOUNDATION OF #3 SYSTEM STACK, HE WAS LIFTING UP ON HANDLE OF PICK TO LOOSEN THE DIRT.

EMP WAS CUTTING HOLE IN 7 DRY WEIGH BELT WITH KNIFE KNIFE SLIPPED CUTTING EMPLOYEES KNEE

EMP WAS CHOPPING WEED GETTING BRIDGE READY FOR PAININT EMPLOYEE LOST CONTROL OF AXE BOUNCED BACK STRIKING RAILING OF BRIDGE AND HIT EMPLOYEE IN HEAD KNOCKING OFF HARD HAT AND STRIKING SCALP

EMPLOYEE REPLACING COUPLING ON MILL BAGHOUSE SCREW WRENCH SLIPPED CAUSING EMPLOYEE TO HIT LEFT WRIST AGAINST PIECE OF MACHINERYU

EMPLOYEE WAS REMOVING A WHEEL BEARING, TIP BROKE ON PUNCH CAUSING EMPLOYEES RIGHT WRIST TO HIT SHARP EDGE OF WHEEL.

EMPLOYEE WAS PULLING IN COME ALONG THE CHAIN SLIPPED HITTING EMPLOYEE IN THE STOMACH

EMPLOYEE WAS CUTTING A STUD BOLT AND THE SAW SLIPPED

EMPL CHANGING BLOWER MOTOR,HE WAS OPERATING COME-ALONG TO LIFT MOTOR INTO PLACE.

EE WAS WORKING IN #3 KILN PUTTING UP A 30# JACK TO BRACE BRICKS ACROSS KILN.

EMPLOYEE WAS HITTING BIN WITH SLEDGE HAMMER TO KNOCK DOWN CRUDE.