Search the record

EMPLOYEE WAS HOLDING A CLAMP. ANOTHER EMPLOYEE ACCIDENTLY STRUCK INJURED EMPLOYEE ON THE LEFT HAND.

EE WAS SWINGING A SLEDGE HAMMER WHEN HE FELT A SHOOTING PAIN IN HIS UPPER BACK AND DOWN LEFT ARM.

EMPLOYEE WAS NOTCHING SOME RUBBER OUT OF SEAL WITH POCKET KNIFE. KNIFE SLIPPED & CUT HIS FOREARM.

EMPLOYEE WAS DIGGING A DITCH USING A PICK AND SHOVEL. IN DOING SO HE STRAINED HIS LOWER BACK.

EMPLOYEE WAS KNOCKING OUT A TRUCK PIN WITH A 12 POUND SLEDGE HAMMER WHICH TWISTING & STRAINED HIS BACK

EMPL USING A UTILITY KNIFE TO CUT SOME MATERIAL. KNIFE SLIPPED & CUT PALM.

WHILE PULLING ON WRENCH TO TORQUE COLLET BOLT, WRENCH SLIPPED AND HIT EMPLOYEE IN THE FOREHEAD.

CLEARING OUT DROP CHUTE ON FFILTER HIT HER FINGER WILE HITTING THE CHUTE WITH PIPE LACER AND COMPOUND FRACT

WHILE USING A HOE FOR ADDITIONAL SUPPORT HOE SLIPPED HITTING EE S UPPER LIP.

WHIE USING A VISE, SMASHED LEFT THUMB BETWEEN METAL AND VISE.

WHILE RUNNING THE HOIST AT THE JAW CRUSHER WHEN PULLING A ROCK OUT THE ROPE CONTROL PULLED H ER WRIST

WHILE INSTALLING A METAL SHEET UNDER AIR T RACK COMPRESSOR TRANSMISSION JACK HUNG UP & FELL ON EMPLOYEES LEFT ARM

EMPLOYEE WAS CUTTING ROPES ON NETTING FOR OUR POND WHILE OTHER PEOPLE WERE WAITING TO PULL NETTING ACROSS PONG. HE DID NOT KNOW AT THE TIME THAT HE AHD CUT HIS LEG, UNTIL HE WAS WALKING BACK UP THE OFFICE AND NOTICED THE BLEEDING.

PRYING ON TIRE RIM WHEN PRY BAR SLIPPED OUT CAUSING MUSCLE BACK TO OVEREXERT.

WHILE CUTTING RUBBER AWAY FROM BOLT HOLE, KNIFE SLIPPED AND CUT EMPLOYEE'S LEFT FOREARM REQUIRING STITCHES.

EMPLOYEE BENT OVER HITTING A SHIM ON A TABLE AND A STEEL MOLD FELL OFF THE TABLE AND HIT THE EMPLOYEE ON THE HEAD AND CUTTING IT.

WHILE DRIVING PIN OUT OF WING SHROUD ON SHOVEL,A PIECE OF STEEL BROKE OFF AND CUT LEFT HAND.

EE WAS PULLING A J BAR IN THE STANDARD ROCK BOX AND GOT HIS FINGER PINCHED BETWEEN THE ROCK BOX AND BAR.

WHILE PRYING ON MILL LINER PRY BAR HIT EMPL IN RIGHT SHOULDER.

WHILE USING A HAMMER TO CUT A CABLE, THE HAMMER SLIPPED AND THE EMPLOYEE PULLED HIS BACK.

EMPLOYEE WAS OPERATING A 3004 DRILL. AS EMPLOYEE WAS CUTTING WIRE TO LOOSEN DRILL, HIS KNIFE SLIPPED AND STABBED HIM IN THE KNEE.

THE BOX OF NAILS WAS IN A CORNER OF THE WOOD SHOP.THE EMPLOYEE KNEELED DOWN TO CUT THE PLASTIC BAND TO OPEN THE BOX,PULLING THE ULITY KNIFE TOWARDS HIMSELF.THE UTILITY KNIFE CUT THROUGH THE PL ASTIC BAND AND SNAGGED ON THE CARDBOARD HOOKED AND CUT HIS LEFT THUMB.THE CUT TO HIS THUMB REQUIRED 5 STITCHES.

EMPL WAS POUNDING LEAD BUTTONS OUT OF SLAG MOLDS. WHEN SHE HIT WITH HAMMER PIECE OF SLAG FLEW UP & WENT INTO EYE. EMPL WAS WEARING BOTH FACE SHIELD & SAFETY GLASSES.

EMPLOYEE WAS PREFORMING ROUTINE OFFICE WORK WHEN HE BENT OVER AND ACCIDENTLY POKED HIMSELF IN THE EY WITH A PENCIL RESTING ON THE DESK.

EE WAS CUTTING UP CARDBOARD BOX. HE WAS CUTTING WITH A KNIFE TOWARDS HIMSELF. WHEN THE KNIFE SLIPPED, IT CUT HIM ON HIS LOWER LEG.

EMPLOYEE WAS SPLITTING CABLE W/KNIFE, HIS HAND SLIPPED AND THE KNIFE WENT INTO HIS LEG.

EMPL SETTING WHEEL BEARING RACE INTO HAUL TRUCK WHEEL WITH HAMMER AND PUNCH.FELT PULL AS HE WAS SWINGING HAMMER-IN HIS BACK.

EMPL WAS CUTTING CARDBOARD WITH UTILITY KNIF. KNIFE SLIPPED CUTTING RIGHT LEG.

EMPL ADJUSTING BLOWER BELT IDLER ON M100.HE LEFT WRENCH HANGING ON ADJUSTING BOLT WHILE CHECKING BELT TENSION AND WRENCH FELL STRUCK EMPL BETWEEN EYES.

EMPLOYEE WAS WORKING ON A CREW THAT REMOVED SOLID AND LOOSE ROCKS AND MATERIALS DOWN TO SOLID BEDROCK FOR A DAM FOUNDATION. HE WAS USING A PICK TO LOOSEN SOME MATERIAL AND ROCKS. ONE DOWNSWING HIT SOLID ROCK, JAMMING HIS HAND.

WHILE UNDER JAW, REMOVING A PLUG, SOME ROCK FELL FROM GRIZZELY BARS OF HYDROSTRKE AND SOME CAME DOWN FINE ORE CHUTE AND HIT HIM.

LIFTED J WRENCH BREAK-OUT TOOL IN NORMAL DAILY ROUTINE AND AND NOTICED A POP AND PAIN IN LEFT ELBOW.

EMPLOYEE WAS ST5NDING APPROX 5-6 FT BEHIND ANOTHER EMPLOYEE WHO WAS DRIVING A PEN INTO A RIPPER SHANK WITH A HAMMER

WHILE TRIMMING 1ANELING WITH EXACTO SHEET ROCK KNIFE,KNIFE SLIPPED AND LACERATED PALM OF LEFT HAND.

EMPLOYEE WAS IN3PROCESS OF DISLODGING ROCK ROM DISCHARGE CHUTE OF THE CRUSHER.PRY BAR BEING USED WAS HIT ON THE END, FORCING OTHER END INTO EMPLOYEE, PUSHING HEAD AGAINST WALL.

EMPLOYEE WAS RE4OVING A HOSE CLAMP-THE SCREWDRIVER SLIPPED AND PUNCTURED HER HAND.

EE WAS STRIPPIN1 CABLE WITH A STRIPPING KNIFE HE SLIPPED & CUT HAND.

USING TIN SNIPS2 EMPLOYEE SNIPPED FINGER.

EMPLOYEE WAS 3 PLACING ALIGNMENT BOLTS BULL GEAR HE WAS HOLDING A HAMMER WRENCH SHITE OTHER EMPLOYEE STRUCK IT WITH A 20 HAMMER HAMMER STRUCK I NAME S FINGER.

EMPLOYEE WAS RE1AIRING A TUBLESS TRACTOR TIRE THE EMPLOYEE WAS USING A COMEALONG TO HELP SET THE BEAD OF THE TIRE TO ALLOW HIM TO PUT AIR INTO IT AFTER THE REPAIRS WERE COMPLETED AS THE EMPLO EE TIGHTENED TH9 COMEALONG UP THE CABLE SLIPPED OFF THE EDGE OF THE RUBBER TIRE THE METAL HOOK HIT HIM IN THE MOUTH AREA

CUTTING PLASTIC3PIPE.

I.NAME WAS SECURING PIGGYBACKED C & H TRAILERS NEAR THE TRUCK SHOP. AS HE WAS APPLYING LEVERAGE TO THE CHAIN CHOKER, THE PIPE SLIPPED FROM THE CHOKER HANDLE AND HIS WEIGHT WAS RELEASED CAUSING INJURY TO HIS ANKLE.

TWO MEN MOVING BALL MILL LINERS WITH BAR, LINER SLIPPED TO ONE END, I.NAME DROPPED HIS END & THE THE OTHER END FLEW UP END HIT HIM IN THE MOUTH & JAW