Search the record

THE EE WAS TRIMMING OUT A HOLE IN A WOODEN CABINET DOOR WITH HIS POCKET KNIFE. WHEN THE DOOR MOVED UNEXPEDTDLY HE CUT HIS LEFT INDEX FINGER WITH THE KNIFE. THE LACERATION REQUIRED SUTURES TO C LOSE.

THE EE WAS CUTTING THE SEAL ON A CHEMICAL BARRELWHEN HIS KNIFE SLIPPED PUNCTURING HIS HAND. THE RESULTING LACERATION REQUIRED 2 STITCHES TO CLOSE.

EMPLOYEE WAS USING A HAMMER AND PUNCH ON A VALVEEMPLOYE REACHED FOR VALVE. HIT HAMMER ON PUNCH KNOCKING A PIECE OF METAL OFF STRIKING EMPLOYEE' S HAND.

CUT THIRD AND FOURTH FINGERS OF LEFT HAND WHILE TRYING TO CUT BROOM STRAWS TO CLEAN AND CLAY DROP SO HE COULD APPLY MORE SILICONE.

TAKING BOILER FAN MOTOR APARET WHEN PIECE OF PAINT RUST CHIPPED OFF MOTOR EMBEDDING IN RIGHT EYE STICKING TO CORNEA.

PIECE OF METAL PUNCTURE WOUND LEFT SIDE CHEST BY REMOVING A BEARING.

PICKING UP A REPULPER SHAFT WITH A COME A LONG.COME A LONG WAS NOT PROPERLY SECURED. SHAFT CAME LOOSE AND FELL ON EMPS RIGHT HAND CAUSING A LACERATION OF THE PINKY FINGER.

WRENCH SLIPPED OFF OF BOLT AND SMASHED INDEX FINGER ON LEFT HAND IN PELLETIZER HOUSING. DR HAD TO DRILL HOLE IN NAIL TO RELIEVE PRESSURE.

CUTTING A PIECE OF METAL WITH A NIBBLER AND A PIECE OF METAL CURLED UP AND CUT 4TH FINGER ON LEFT HAND.

EE WAS REMOVING A TOOTH OFF FRM A BUCKET. HE WAS HITTING TOOTH WITH A HAMMER AND A PIECE OF METAL CAME OFF STRIKING HIM IN THE RIGHT ABDOMEN.

WHILE CLOSING DOOR ON RAIL CAR HOPPER, TOOL SLIPPED OFF CATCHING FINGER BETWEEN DOOR AND CROSSFIRE.

TIGHTENING 3" FEED PIPE ON MAGNET AND WRENCH SLIPPED AND HIT LEFT THUMB.

WHILE JACKING RAIL CAR UP TRACK, JACK SLIPPED CAUSIGN EMPLOYEE TO SLIP STRAINING MUSSCLES IN LWOER BACK.

HOLDING NUT WITH NUT DRIVER AND ATTEMPTING TO TIGHTEN SCREW WITH SCREW DRIVER AND CUT INDEX FINGER ON RIGHT HAND.

EE WAS CLEANING A 1" ALUMINUM COUPLING WITH A METAL BRUSH ON A GRINDER WHEN THE BRUSH CAUGHT THE COUPLING AND THE EE S HAND WAS STRUCK BY THE BRUSH.

EMPLOYEE WAS SQUATTING DOWN NAILING BOARDS TOGETHER WHEN HE FELT PAIN IN HIS LOWER BACK.

EMPLOYEE ATTEMPTED TO DISLODGE A LUMP OF CLAY. REACHED INTO TRANSITION THROUGH CLEAN OUT - REMPVED HAND & HIT SIDE OF TRANSITION WITH HAMMER REACHED BACK IN & LUMP OF COAL FELL PUSHING HAND IN TO ROTARY LOCK BELOW CLEANOUT.

SLINGING SLEDGE HAMMER AND SPRAIN RIGHT WRISST.

REMOVING RUBBER SKIRTING FROM BOTTOM OF EVEN FEEDER. RATCHET SLIPPED HITTING EMPLOYEE IN MOUTH, CHIPPING FRONT TOOTH.

TRYING TO GET THROUGH A THICK AREA OF BRUSH AND A VINE PUSHED HIS BUSH HOOK BACK INTO HIS LEG.

EMPLOYEE WAS STABBED IN RIGHT THUMB WITH BOX CUTTER WHILE REACHING AROUND BIG BAG TO CUT OPEN.

HIT FINGER WITH WRENCH CONTUSION.

EMPLOYEE WAS REMOVING A CAP ON LINE WHEN PRESSURE CAUSED CAP TO BLOW OFF & STRIKE EMPLOYEE ON FOREHEAD.

BRACES ON TUBE PUMP HAD BROKEN. EMPLOYEE WAS REPLACING BRACE WHEN HE WAS BREADING BOLTS LOOSE, WRENCH SLIPPED CUTTING RIGHT FOREARM.

PORTA POWER (TOOL) SLIPPED & HIT CHIN

ARM HIT A SHEET OF METAL CUT L FOREARM

EMPLOYEE WAS TRYING TO FREE UP ROTORY LOCK WITH 24" PIPE WRENCH, ROTORY LOCK TURNED LOOSE, WRENCH SLIPPED AND HIT HIS FRONT TOOTH.

EMPLOYEE BUMPED HIS RIGHT KNEE ON A LAZY SUSAN WHEEL IN THE WELDING ROOM. AS HE REACHED DOWN TO RUB HIS KNEE HE HIT HIS ELBOW ON BLUNGER BLADE KNIFE.

HIT FINGER WITH HAMMER.

HE WAS TIGHTING A PIPE FITTING AND TWISTED HIS ARM.

54736EYE WAS CHANGING BLADE IN UTILITY KNIFE WITH A SCREWDRIVER.THE SCREWDRIVER SLIPPED AND PUNCTURED EMPLOYEE'S LEFT PALM.SUTURES REQUIRED.

WHILE TIGHTENING CHAIN BUCK TO SECURE DOZER ON LOWBOY, EMPLOYEE STRAINED LOWER BACK.

EMPL TIGHTENING DOOR AND THE WRENCH SLIPPED AND MASHED THUMB.RECD 6 STITCHES IN THUMB.

REMOVING FISHTAIL BIT AND SUB FROM UNDER TURN TABLE OF DRILL RIG.PULLED MUSCLE IN LOWER BACK.

EE WAS HITTING PRY BAR WITH HAMMER TRYING TO KNOCK APART THE MOTOR. PRY BAR SHATTERED AND PIECE WENT INTO HIS CHEST UNDER THE RIGHT BREAST.

EMPLOYEE WAS TIGHTENING BOLTS & HAND SCRUBBED OVER A JAGGED STEEL COVER CUTTING HAND

EMPLOYEE WAS PULLING ON A BOLT & IT GAVE WAY CAUSING THE RATCHET TO STRIKE THE EMPLOYEE IN THE MOUTH

EMPLOYEE WAS TRYING TO CLOSE BOXCAR WITH A METAL BAR; BAR SLIPPED AND SMASHED AGAINST SIDE OF BOXCAR. FIGNER SPLINT.

I.NAME & OTHER WERE INSTALLING PVC PIPE.OTHER WAS BUMPING THE END OF PVC NIPPLE WITH A HAMMER WHEN FOREIGN BODY GOT INTO BOTH OF I.NAME EYES.REPORTED INJURY TO SUPV 1-27-92.WENT TO DR ON 1-29 DIDNT LOSE TIME BETWEEN DATE OF ACCIDENT AND DR VISIT.

EE WAS USING A 1 1/8 WRENCH TO LOOSEN BOLTS IN 5 BLUNGER PUMP MOTOR. AS HE PULLED ON WRENCH,EE WHAS A PAIN IN HIS LOWER BACK.

WHILE CLAMPING BULK HEAD BANS THE BAN BROKE AND CUT WORKER ON WRIST.

CUT R THUMB ON EDGE OF CAP FOR DRAIN WHILE HITTING WITH HAMMER

WHILE CUTTING TUYGON TUBING OFF SANDGRINDER BLADES, BOX CUTTER SLIPPED AND CUT LEFT FOREARM.

ANOTHER EMPLOYEEW AS KNOCKING SPRACKET OFF SHAFT AND THE SPROCKET BUST. AS HE WAS PASSING BY A PIECE OF METAL HIT HIM IN THE FOREHEAD. TWO SUTURES REQUIRED.

CUTTING A PIECE OF PERLING AND CUT FINGER.

CUTTING MATERIAL WITH QUICKIE SAW, LEFT SHARP OBJECT ON IT AND CUT FINGER.

EMPL CLEANING UP EDGES OF PIECE OF PLEXIGLASS WITH POCKET KNIFE.KNIFE SLIPPED & CUT RIGHT INDEX FINGER AT MIDDLE JOINT.NEEDED STITCHES.

EMPLOYEE WAS CUTTING ON A PIECE OF WOOD WITH A POCKET KNIFE IN HIS SPARE TIME. THE KNIFE SLIPPED AND CUT HIS LEFT HAND. EMPLOYEE RECEIVED 6 SKIN SUTURES.

EMPLOYEE WAS REPLACING HUB ON ATOMIZER WHEN HE CAUGHT HIS LEFT INDEX FINGER BETWEEN HIS WRENCH AND THE HUB. THE ACCIDENT RESULTED IN A MASHED AND CRACKED LEFT FINGERNAIL.

EMPL WAS IN HOLE AT MAGNET WHILE ANOTHER EMPL WAS TOPSIDE. EMPL TOLD OTHER TO DROP HIM I=FLAIRING TOOL WHCIH HE DID. INJURED MISSED OOL & IT STRUCK HIM IN MOUTH.