Search the record

EE WAS PULLING ON SLEEVER BAR AND LOST HIS BITE.THE BAR CAME BACK AND CUT HIS FOREHEAD.

EE WAS USING A ROPE PULLEY TO LIFT A TOOL BUCKET. WHILE PULLING HE FELT A PAIN IN HIS BACK.

USING 7' PRY BAR. PRY BAR SLIPPED AND HIT EMP ONTOP OF HEAD. RESULT: WOUND ON TOP OF HEAD REQUIRING STITCHES.

TRYING TO ALIGN MOTOR. WRENCH SLIPPED AND FINGER CAUGHT BETWEEN WRENCH AND MOTOR.

WHILE LIFTING DUCTWORK, USING A COME A LONG, THECHAIN BROKE. THIS CAUSED THE DUCTWORK (IRON) TO TWIST AND TIP. EMP'S THUMB GOT CAUGHT BETWEEN A SPUD WRENCH AND THE IRON. INITIAL EVALUTAION OF THE INJURY SHOWS BONE TO BE BROKEN IN 2 PLACES, WITH FLESH AROUND THE BONE SEVERELY DAMAGED.

EMPLOYEE WAS BUILDING WOODEN FRAME TO HOLD MATERIAL IN THE A FRAME BUILDING. HE WAS POSITIONING A BOARD, WITH HIS FOOT AS HE WAS SWINGING THE HAMMER TO STRIKE THE NAIL HEAD. ON TEHDOWN STRIK E HIS FOOT SLIPPED CAUSING HIM TO MISS THE NAIL HEAD STRIKIGN HIKMSELF ON THE FIRST DIGIT OF HIS LITTLE FINGER ON THE LEFT HAND.

EMPLOYEE WAS CLEANING SUPER SUCKER HOSE WITH A METAL BAR TO UNPLUG THE HOSE WHEN HE GOT HIS 5TH FINGER OF RIGHT HAND IN A PINCHPOINT. HE WAS WEARING GLOVES.

EMPLOYEE WAS REMOVING LIGHT BULB FROM SOCKE TNAD WAS CUT WITH SIDE CUTTERS HE WAS USING.

EMPLOYEE WAS REMOVING HEAD WHEEL SEGMENT FROM HEAD WHEEL WITH A SLEDGE HAMMER WHEN A SMALL FRAGMENT OF METAL BROKE OFF SEGMENT HITTING EMPLOYEE IN LEFT LEG AND LEDGED IN LEG MUSCLE.

EMPLOYEE WAS WORKING WITH A SOCKET WRENCH WHEN IT SLIPPED CAUSING STRAIN OF RIGHT ROTAR CUFF. WAS TREATED WITH MEDICATION.

EMPL USING A RAZOR KNIFE TO CUT THE OUTER COVER OF CONTROL CABLE FOR THE 70T CRANE IN MILL WHEN KNIFE SLIPPED AND CUT LEFT INDEX FINGER.

EMPLOYEE WAS INSTALLING BUSHINGS IN A TRUCK WHEN A SMALL PIECE OF METAL ENTERED HIS RIGHT INDEX FINGER.HE WAS NOT WEARING GLOVES.THIS IS BEING REPORTED BECAUSE THE FIRST DOCTOR DID NOT WANT TO REMOVE IT AND THE EMPLOYEE HAD TO SEE A SECOND DOCTOR.

EMPLOYEE WAS LOOSENING A NUT ON AN ENDLOADER WHEN HIS HAND GOT CAUGHT IN A PINCH POINT.THE WRENCH SLIPPED PINCHING THE PALM OF EMPLOYEES LEFT HAND CAUSING A LACERATION TO PALM AREA.

EE WAS USING A UTILITY KNIFE TO CUT A VACUUM HOSE FOR THE DIANO WHEN THE KNIFE SLIPPED AND CUT THE LEFT MIDDLE FINGER.

EMPL WAS USING SLEDGE HAMMER TO CLOSE GATE OF #14 CLINKER FEEDER HE MISSED GATE HITTING FEEDER . FOLLOW THRU CAUSED STRAIN ON MUSCLES & LIGAMENTS IN MID TO LOWER BACK CAUSING TORN MUSCLES & L IGAMENTS IN BACK AREA.

EE WAS PUSHING SHACKLE PIN THRU PUSH ROD WITH A BAR IN THE ROLLER MILL WHEN THE ROD SHIFTED AND JERKED HITTING THE BAR CAUSING THE BAR TO HIT EE ON RIGHT SIDE OF FACE.

EMPLOYEE WAS CLEANING CLINKER ELEVATOR PIT WITH A RED BAR BREAKING UP HARD CLINKER AND SPRAINED RIGHT SHOULDER USING EXCESSIVE FORCE ON RED BAR. SHOULD HAVE USED JACK HAMMER.

EMPLOYEE WAS REPAIRING WIETH BELT AND WAS PULLING BELT WITH CHANNEL LOCKS WHEN CHANNEL LOCKS SLIPPED CAUSING EMPLOYEE TO LOSE BALANCE AND FALL BACK HITTING PIECE OF METAL ANGLE IRON WITH RIGHT ARM.

EE WAS POKING BUILD UP OF MATERIAL IN COOLER HOOD BY KILN DROP OUT WHEN A PIECE BROKE LOOSE FORCING POKE BAR UP HITTING EE UNDER CHIN.

REMOVING GLASS GLOBE FROM FIXTURE HIT GLOBE WITH HAMMER CAUSING GLOBE TO SHATTER HITTING L ARM

EMPLOYEE WAS POKING OUT THE BASIN OF THE NORTH CONDITIONING TOWER WHICH WAS PLUGGED WHEN DUSTY CONDITIONS CAUSED DUST PARTICLES BECAME LODGED IN LEFT EYE.

EMPLOYEE WAS REMOVING BUILD-UP OF MATERIAL IN PUG TANK WITH STEEL POKE BAR WHEN HE CAUGHT HIS LITTLE LEFT FINGER BETWEEN POKE BAR AND TANK.

EMPLOYEE WAS REMOVING A GUIDE PIN FROM A ROLLER PAIR WHEN HANGING CHAIN FALL SLIPPED AND FELL CAUSING EMPLOYEE TO LOOSE BALANCE AND FALL CAUSING INJURY TO RIGHT ARM & SHOULDER.