Search the record

WHILE ATTEMPTING TO BREAK A JOINT ON DRILL PIPE, WRENCH SLIPPED, CATCHING FINGER BETWEEN PIPE WRENCH AND FOOT CLAMP.

TIGHTENING A BOLT WITH WRENCH. FELT A PULL IN BACK.

DRIVING A LIFTER BOLT OUT OF LIMESTONE MILL, HAMMER SLIPPED ANDEMPLOYEE STRUCK FINGER ON BOLT.

OPEN END WRENCH SLIPPED AND STRUCK EE IN MOUTH.

EMPLOYEE WAS CUTTING A 2IN HOSE KNIFE SLIPPED & CUT PALM OF HAND

REPACKING PUMP. HIT FITTING ON DISCHARGE END OF PUMP WHICH STILL HAD PRESSURE ON IT. SMALL AMOUNT OF SLURRY SPRAY ENTERED EMPLOYEE'S LEFT EYE BEHIND PROTECTIVE EYEWEAR.

CUTTING RUBBER LIFTERS, KNIFE SLIPPED AND LACERATED LEFT THIGH.

EMPLOYEE PLACED FOOT ON WRAP WRENCH CO-WORKER STRUCK WRENCH WITH 16IN HAMMER HAMMER GLANCED STRIKING EMPLOYEE

REMOVING STRAINER CAP FROM PIPE WITH PIPE WRENCH. WRENCH SLIPPED CAUGHT SMALL FINGER BETWEEN WRENCH AND PIPE.

THE EMPLOYEE WAS WORKING ON A HAUL TRUCK (777B). HIS HAND SLIPPED OFF THE WRENCH HE WAS USING AND STRUCK THE AIR CLEANER, WHICH CUT HIS LEFT MIDDLE FINGER AT THE KNUCKLE.

34339NG PLASTIC PIPE WITH KNIFE,SLIPPED AND LACERATED WRIST.

INJURED WAS GETTING A DENSITY SAMPLE FROM THE SAW MILL. HE WAS WORKING WITH A POLE THAT HAD A HOOK ON ONE END AND A CUP ON THE OTHER END. THE CAP END HIT HTE TRAMMEL AND RIPPED IT FROM HIS H AND. THE HOOK CAUGH THIS LAST TWO FINGERS. THE HOOK TO HUNG THE POLE UP HAS BEEN REMOVED AT THIS TIME.

EMPLOYEE WAS CHANGING CUTTING EDGES ON C-99 CAT DOZER. CUT LEFT HAND THUMB ON BOLT HE WAS REMOVING CAUSING EMPLOYEE TO REQUIRE STITCHES.

USING PIPE WRENCH WRENCH SLIPPED EMPLOYEE LOST BALANCE AND FELL.

WORKING ON VEHICLE USING WRENCH SLIPPED OFF NUT & SLAMMED HAND INTO CONCRETE FLOOR

CUTTING WIRE TIE WITH KNIFE PULLED KNIFE TOWARDSHIM & CUT FOREMAN

EMPLOYEE WAS INSTALLING SHIMS ON CIRCLE OF GRADER USING A CRESCENT WRENCH IT SLIPPED CAUSING CIRCLE TO FALL INTO PLACE SVERENING R INDEX FINGER

SPLITTING HOLES STRAINED KNEE

HIT 2 PC OF METAL WITH HAMMER BOUNCED BACK HIT IN MOUTH BROKEN TOOTH

INSTALLING SUCTION PIPE ON PUMP USING HYDRAULIC JACK.IT SLID OUT STRIKING EMPL ON CHEST,PIPE DROPPED ON FOOT.

EMPLOYEE WAS IN HIGH PRESSURE PREHEAD-ANOTHER EMPLOYEE WAS PUSHING PLATE FROM BELOW. EMPLOYEE HAMMERED SHELVE PLATE INTO PLACE AND STRUCK LEFT INDEX FINGER WITH HAMMER.

WAS CUTTING OPEN CARD BOARD BIT BOX WITH POCKET KNIFE, SLIPPED AND PUNCTURED LEFT ARM WITH KNIFE.

EMPLOYEE WAS TURNING A PIIPE WRENCH, THE WRENCH SLIPPED AND THE EMPLOYEES RIGHT ELBOW SLAMMED INTO STAINLESS STEEL.

EMPLOYEE WAS TIGHTENING BOLT WHEN WRENCH SLIPPED EMPLOYEE BRUISED RIGTH HAND.

TIGHTENING A BOLT ON EQUIPMENT WHEN HIS WRENCH BROKE HIS HAND STRUCK MACHINE FRAME HE DID NOT REPORT ACCIDENT FOR ABOUT 4 HOURS AND CONTINUED TO USE IT EASILY SEEMED TO BE BRUESED ONLY DECIDED HE SHOULD SEE DR WHEN IT DID NOT START TO HEAL DR VISIT 3-9-89 SURGERY FOR TORN LIGAMENT ON 3-15-89 RELEASED TO LIGHT DUTY

EMPLOYEE WAS POSITIONED ON BRIDGE WALKWAY WHILE HELPING PULL SECTIONS OF BRIDGE TOGETHER WITH A CABLE COME-ALONG WHEN THE 3' CHEATER PIPE CLEARED THE HANDRAIL, THE TWISTING FORCE FORM THE COM E-ALONG JERKED EMPLOYEE UNDER THE HANDRAIL THROUGH AN OPENING IN THE STEE L. FELL APPROX. 30' ONTO COMPACT DIRT.

EMPLOYEE WAS REMOVING A FIN FROM AGITATOR SHAFT WITH A FORK LIFT THE FIN SWUNG AWAY FROM THE SHAFT WHEN THE LAST BOLT WAS REMOVED AND THE FIN HIT THE EMPLOYEE IN THE CHEST

USING WRENCH TO TIGHTEN WATER TANK CAP WRENCH SLIPPED & HE FELL BACKWARD OFF TRACK OF DRILL STRIKING RIGH TINFERIOR BUTTOCK ON PORTION OF CAROUSEL THEN FELL ON ABOUT 2' TO GROUND.

EMPLOYEE WAS TYING THE REBAR WHEN THE WIRE THAT HE WAS STRETCHING BROKE AND HIS PLIERS PROJECTED BACKWARDS HITTING HIM IN THE MOUTH.

I.NAME WAS CUTT3NG A RUBBER HOSE WITH POCKET KNIFE SLIPPED AND CUT HIS THUMB