Search the record

EMPLOYEE WAS DRIVING A RIPPER CHAIN PIN ON CM03 WITH A HAMMER WHEN A CHIP CAME OFF THE PIN STRIKING THE EMPLOYEE IN THE THIGH. EMPLOYEE WAS SENT TO DOCTOR TO HAVE THE CHIP REMOVED. EMPLOYEE RE TURNED TO WORK WITH FULL RELEASE.

WHILE PICKING & SHOVELING EE SPRAINED LEFT FOREARM.

SLEDGE HAMMER BLOW TO RIGHT KNEE CAP. COWORKER WAS HAMMERING TOOL JOINT LOOSE--MISSED AND HIT EE.

EMPLOYEE WAS HANGING A LOADER CABLE AT #2 ENTRY LBS #2. EMPLOYEE WAS STANDING GROUND LEVEL LIFTING THE CABLE WITH A CRUTCH. THE HOOK WAS 10.5 FTHIGH WHEN THE CABLE STARTED TO SWAY BACK AND FOR TH. THE EMPLOYEE LET THE CABLE FALL AWAY FROM HIM DISLOCATING HIS SHOULDER.

EE STRUCK HIMSELF IN THE FACE WITH A SMALL PRYBAR. SMALL CUT ON RIGHT SIDE OF FACE REQUIRING TWO SUTURES.

EMPLOYEE WAS TAKING A STEERING ARM OFF OF SC#30 SHUTTLE CAR USING A 3/4" ALLEN WRENCH AND HAMMER. UPON STRIKING THE ALLEN WRENCH WITH THE HAMMERTO BREAK BOLT LOOSE, THE ALLEN WRENCH CAME OF AL LEN HEAD BOLT AND HIT EMPLOYEE IN THE UPPER LIP.

WHILE TAPPING A SPACER BAR INTO PLACE ON A SCREEN THE EMPLOYEE STRUCK HIS LEFT INDEX FINGER CAUSING A CHIPPED BONE.

EMPLOYEE WAS CUTTING OFFEND OF 1/2IN HOMP ROPE WITH POCKET KNIFE WHEN ROPE DIDNT CUT THRU AFTER 2 OR 3 SWIPES OF THE KNIFE METHOD OF CUTTING AWAY WAS ABONDONED & ROPE WAS LAID AGAINST SCAFFOLD TO CUT TOWARD IT KNIFE SLIPPED & CUT LEFT INDEXFINGER AT THE KNUCKLE

WHILE TRIGHTENING A BOLT ON A U SHAPED CLAMP THE EE HAD THE WRENCH SLIP AND HIS FORWARD MOMENTUM CAUSED HIM TO STRIKE HIS LIP AGAINST THE SIDE OF THE MACHINERY HE WAS WORKING ON. THIS REQUIRED TWO STITCHES TO CLOSE.

AN EE PLACED HIS RATCHET WR4ENCH ON A TANK PLATFORM ABOVE HIM AND HAD THE WRENCH FALL AND STRIKING HIS FINGER.

WHILE POUNDING A BIT INTO A BIT HOLDER ON A CONTINUOUS MINER,THE EMPLOYEE HAD AN UNKNOWN PARTICLE FLY INTO HIS EYE.THE DOCTOR PRESCRIBED ANTIBIOTIC DROPS FOR TREATMENT.

USING PIPE TO LEVER TRAILER HIGHER AND WHEN DOING PULLED MUSLCE IN R ELBOW

AFTER A DRIVE CHAIN ON A DRAG FEEDER. EQUIPMENT WAS BEING JOGGED TO INSPECT FOR PROBLEMS WHEN THE CHAIN SNAPPED STRIKING EE ON THE LEFT EAR.

WHILE INSTALLING LOCK RINGS ON THE MINER DRUM END COVER, A HAMMER SLIPPED OFF THE EDGE OF THE TOOL AND HIT HIS FINGER.

WRENCH SLIPPED AND FINGER STRUCK SHARP METAL AND CUT HIS FINGER.

WHILE LOOSENING A BOLT, THE EXTENSION POPPED OFF RATCHET. THE EXTENSION FLIPPED, HITTING HIM ON THE CHIN AND CHIPPING A TOOTH.

WHILE USING A CHISEL AND HAMMER, THE CHISEL FLEW BACK AND HIT THIS THUMB, CAUSING IT TO SWELL. EE WAS SENT TO THE DR. FOR X RAY. NO FRACTURE WAS FOUND. DR IMMOBILIZED FINGER TO PREVENT FURTHER IRRITATION.

EMPLOYEE WAS CUTTING A FITTING OFF OF A 4" SUCTION HOSE USING A POCKET KNIFE. IT SLIPPED AND CUT HIS LEFT HAND. EMPLOYEE WAS SENT TO THE DR'S OFFICE AND RECEIVED 8 SUTURES.

EMPL PULLING BO PIN ON SPLICE USING VICE GRIPS.PIN BROKE AND VISE GRIPS HIT HIM IN MOUTH CHIPPING UPPER LEFT CUSPID.

WORKTRUCK BECAME STUCK IN WASH. A HIGH LIFT JACK WAS BEING USED TO LIFT TRUCK. THE JACK MAL-FUNCTIONED CAUSING THE ACCIDENT.