Search the record

EE WAS TAKING A LEAF SPRING OFF OF 22 DIESEL. HE WAS LOOSENING U BOLTS ON REAR END. WHEN HE TOOK THE LAST NUT OFF THE SPRING DROPPED AND THE REAR END FELL ON HIS LEFT HAND, CAUSING A CUT BETWE EN THE INDEX AND MIDDLE FINGER.

EMPLOYEE WAS SHOVELING A SPILL AT A TAIL SECTION. WHEN PULLING BACK ON SHOVEL THE HANDLE HIT HIM IN THE MOUTH. (BROKE PART OF ONE TOOTH OFF)

WORKING WITH COWORKER TO FREE UP BY PASS DRIVE ON THE UNDER FLOW WRENCH SLIPPED CAUSING EMPLOYEE TO SLIP ALSO 1ST DAY RESTRICTED DUTY 04-05 -95

CO-WORKER WAS HAMMERING RIVET KNOCKERS. EMPLOYEE PUT HAND OUT TO MOVE KNOCKER WHEN CO-WORKER HIT HIM WITH HAMMER.

ATTEMPTING TO STRAIGHTEN IDLER. HE HAD ONE SIDE LOOSENED AND WHEN HE LOOSENED THE OTHER SIDE THE IDLER JERKED ITSELF STRAIGHT AND HIT HIM.

CHANGING OUT BITS ON DRUM SET PEEN HAMMER AGAINST BIT AND HIT IT WITH 4LB HAMMER. PIECE OF METALENTERED LEFT THIGH.

EE WAS DOWN ON ALL FOURS UINDER DRUM SET PORTA POWER CYLINDER UP WITH LEFT ARM SUSTAINED PULLED MUSCLE IN LEFT SIDE BY RIBCAGE.

TRYING TO REMOVE CONVEYOR CHAIN SPROCKET WHEN HE HIT SPROCKET WITH HAMMER PIECE OF METAL STRUCK LEFT LEG BY KNEE.

HELPING CHANGING CUTTER HEAD. TIGHTENING BOTTOM BOLT ON HEAD WITH RATCHET & CHEATER PIPE. AS HE PUSHED ON PIPE FELT PAIN IN GROIN AREA. RESTRICTED DUTY STARTED 2/10/94.

CHANGING BITS ON MINIG MACHINE, BIT WOULDN'T COME OUT SO HE USED 4 LB HAMMER. THE HAMMER MISSED THE BAR AND HIT HIS LEFT HAND.

PULLING A PIECE OF RUBBER WHEN HIS CHANNEL LOCKSSLIPPED. HE FELL AND HIT HIS LEFT HAND ON THE STACKER RAIL.

USING ONE TRACK JACK. TRYING TO JACK THE 10SC BACK DOWN. THE JACK WENT DOWN 1ST CLICK OK, 2ND CLICK WOULDN'T GO. WHEN IT CLICKED AGAIN- BOUNCED BACK UP OUT OF HIS HANDS AND HIT HIS CHIN.

WORKING ON TOP CUTTER CHAIN REMIER PIN WOULDN'T COME OUT TRIED TO FORCE PIN OUT OF CHAIN WITH 1 1/4" X 8" BOLT AND LIFT JACK-BOLT FLEW OFF AND HIT HIM IN THE FACE.

PULLING CABLE WITH J-HOOK. HOOK SLIPPED OFF AND SHE FELL BACK TWISTING LEFT KNEE.

PULLING UP ON PIPE WRENCH 1ST DOCTOR VISIT 1/21/93

CHANGING BITS ON #14 MINER. HITTING THE TOP OF THE BIT LUG WITH A HAMMER AND PIECE OF METAL HIT HIM IN THE ABDOMEN.

KNIFE SLIPPED.

PULLING AN IMPLAER OUT OF TANK WHEN CAHIN SLIPPED ON IMPALER BEING PULLED UP AND CAUGHT EMPLOYEE OR RIGHT SIDE UNDER RIGHT ARM MAKING AN APPROX. 5" WIDE CUT REGUIRING SUTURES.

MAKING SPLICE ON BELT HE WENT TO PULL DRIVER OUT & MOVE TO NEXT RIVETS COWORKER HIT HIS HAND WITH 4LB HAMMER

EMPLOYEE WAS DRIVING A PIN INTO COUPLING ON MICHIGAN CAR MOVER, A PIECE OF METAL ENTERED HIS ARM.

WORKING ON NEW SUBSTATION AT 4-N BELT CUT HIS LEFT HAND WITH KNIFE

LIFTING FEEDER WITH A STEP JACK, THE HANDLE CAME OUT AND HIT HER RIGHT ELBOW.

PUTTING A CLAMP ON AIR LINE IN SHAFT,SCREWDRIVER SLIPPED AND CUT HIS RIGHT THUMB.

TRYING TO KNOCK DRILL CHUCK OUT OF DRILL STEEL WITH HAMMER,SMASHED LITTLE FINGER LEFT HAND WITH HAMMER.

HURT HIS RIBS SOMETIME DUEING THE WEEKEND. THIS CAUSED HIS BACK AND LEGS TO HURT. FIRST DAY OFF FROM WORK WAS MAY 7, 1990.

TRYING TO OPEN FEED VALVE TO #2 CRYSTALLIZER, HE ATTEMPTED TO HAMMER ON THE VALVE WRENCH WITH A PIECE OF IRON STRIKING LEFT HAND BETWEEN THUMB AND 1ST FINGER CUTTING MEAT BETWEEN FINGERS.

HAMMERING ON PUMP,HANDLE BROKE AND HAMMER HIT THUMB.

WHILE USING PORTAPOWER ON SHAFT PIECE OF PLATE SHOP OUT STRIKING EMPL ON MIDDLE FINGER OF LEFT HAND.

EMPLOYEE TIED A CHAIN TO FORKLIFT AND TO A PALLET ON A RACK, WHEN HE PULLED DOWN ON THE CHAIN THE BOARD BROKE. THE EMPLOYEE LANDED ON THE SIDE OF HIS FOOT.

CHANGING BITS AND WAS KNOCKING A BIT IN WITH A BIT WRENCH SHE HIT HER LEFT INDEX FINGER WITH THE BIT WRENCH.

PULLING MINER CABLE OUT OF WAY WITH CABLE HOOK FELT PAININ BACK AND LEFT HIP.

CUTTING A PIECE OF RUBBER TO USE FOR A SKIRT. USING A RAZOR KNIFE - WHEN HE CUT THROUGH THE RUBBER THE KNIFE CAME BACK AND SLICED HIS KNEE.

JACKING CUTTER DRUM BACK ON TO MINER PORTO-POWER SLIPPED OUT HIT EMPL IN THE FACE

EMPLOYEE WAS CUTTING A PICE OF RUBBER FOR SKIRT,HE WAS HOLDING RUBBER DOWN WITH HIS KNEE.WHEN KNIFE SLIPPED OFF RUBBER AND STRUCK HIS KNIFE ABOVE HIS KNEE.

SWINGING SLEDGE HAMMER ON FRAMEWORK OF F-800 FELT BACK AND SHOULDER ON LEFT SIDE PULL