Search the record

TIGHTENING BOLTS WITH CRESENT WRENCH.

EMPLOYEE WAS WORKING ON SHEAR WHEN A BOLT FELL OUT OF SLOT AND HIT HIM ON FACE.

EMPLOYEE WAS ASSISTING WITH THE INSTALLATION OF A 5761 SHOVEL TOOTH POINT. THE FACTORY U THAT IS SUPPOSED TO LIFT THE TOOTH WAS STRUCK BY THE INJURED WITH SLEDGE HAMMER AND A SMALL PIECE OF ME TAL STRUCK THE INJURED ON UPPER LIP. FOUR STITCHES TO CLOSE THE INJURY.

USED CRAIB TIE TO PRY GOPHER OFF ROCK

KPRYING ON TAIL DRIVE OF LONGWALL 15 RECOVERY & PRY BAR SLIPPED STRIKING HIM ON LEFT SHOULDER.

WORKING ON SPLICE ON LW,1 BELT AT TAKEUP HIT FINGER WITH HAMMER.WORKING W/FX.

EMPL STRAINED RIGHT HAND & WRIST BY LIFTING 8 X 8 TIMBER ON LW I TAILGATE ENTRY.

FIXING LIGHT ON MINER & CUT RIGHT HAND WITH KNIFE.

CAUGHT LEFT RING FINGER BETWEEN WRENCH AND ROOF BOLT PLATE.

WHILE BEATING OUT ROOF BOLT STEEL-HIT RIGHT MIDDLE FINGER CAUSING FRACTURE.

CHANGING ROLLER JACKING ON CHAIN BLOCK FELT BACK PAIN

CO-WORKER WAS USING A PRY BAR TO POSITION THE TRAM CHAIN ON LEFT SIDE OF MINER. CO-WORKER WAS USING THE STEEL GUARD BAR AS A FULCRUM. WHEN THE PRY BAR WAS PUSHED DOWN, THE GUARD FELL AND HIT I .NAME ON RIGHT LEG. CONTUSION RIGHT LEG.

EMPLOYEE WAS WORKING ON DA RAM ON #59 SHIELD WHEN HE HIT HIS RIGHT THUMB WITH A BALL PEEN HAMMER.

EMPLOYEE WAS HELPING PICK UP A FLOAT CELL AGITATOR. HE WAS HOOKING UP A COME-A-LONG AND IT FELL LANDING ON HIS RIGHT MIDDLE FINGER.

CAUGHT LEFT MIDDLE FINGER BETWEEN STEEL JACK & GOFER FRAME. LACERATION LFT MIDDLE FINGER. SUTURES.

WORKING OVERHEAD, TIGHTENING BOLTS ON CHANNELS, STRAINED R SHOULDER AND NECK. R SHOLDER, CERVICAL STRAIN.

PUTTING T IN SUCTION USING WRENCH FELT TEAR IN RSIDE

WAS REMOVING PACKING GLAND FROM CYLINDER WHEN PIPE WRENCH SLIPPED CAUSING PAIN IN LOWER BACK.

BREAKING LIMESTONE ROCK WITH SLEDGE HAMMER WHEN PIECE BROKE OFF STRIKING LEFT CHIN.

SHOVELING CHUTE OUT & STSRUCK RIGHT ELBOW ON ANGLE IRON

CUTTING HOSE WITH UTILITY KNIFE. KNIFE SLIPPED AND CUT LEFT HAND.

EMPLOYEE STATED HE WAS TIGHTENING A BIT LUG ON THE MINER AT "A" SHAFT AND STRAINED HIS LOWER BACK.

DRIVING A SPIKE NAIL WITH HAMMER. HAMMER FLANCED OFF OF NAIL AND STRUCK LEFT RING FINGER CAUSING FRACTURE TO TIP. WORKING WITH FRACTURE.

EMPLOYEE WAS CHANGING A VALVE BANK ON CONTINUOUS MINER AND HIT HIS THUMB WITH HIS HAMMER.

OPEN BUCKET OF STOPPING SEALER, KNIFE SLIPPED CUT INDEX FINGER

SWINGING A SLEDGE HAMMER TO BUST ROCK UP,SIDE OF A PROP WITH RIGHT MIDDLE FINGER AS COMING DOWN WITH SLEDGE.

GOT PYRO-CAM IN RIGHT EYE. FOREIGN BODY RIGHT EYE.

CUTTING STRINGS ON BELTLINE WITH UTILITY KNIFE PULLED ON ROLLER, ROLLER BOUND AND CAUSED HAND TO JERK AND CUT RIGHT THIGH. LACERATION WITH SUTURES.

DOING REPAIR WORK ON A ROOF BOLTER. WRENCH SLIPPED AND HE STRUCK HIS LEFT ELBOW AGAINST THE FRAME. WORKED UNTIL 1/9/90. BEGAN LOSING TIME TO HAVE SURGERY.

HE WAS INSTALLING AN AXLE IN A HILIFT LOADER. HE TAPPED ON THE AXLE WITH A HAMMER AND A PIECE OF THE AXLE OR HAMMER HIT HIM IN THE THUMB.

REMOVING A BROKEN FITTING FROM ROOF BOLTER. HE WAS PUSHING ON THE WRENCH WITH HIS RIGHT FOOT, AND STRAINED HIS BACK.

EMPLOYEE WAS USING A KNIFE TO CUT TAPE. THE KNIFE SLIPPED AND HE CUT HIS THUMB.

USING RATCHET & TORR MULTIPLIER TRIGHTENING BOLTS ON SHEAR PULLING & STRAINED LOWER BACK.

BENT ELBOW BACKWARDS SUING A CHEATER BAR TO TIGHTEN CONNECTIVE BOLTS ON GEAR HEAD:THE BAR SLIPPED AND MY ARM OVEREXTENDED.RIGHT ELBOW.BEGAN MISSING TIME 04-02-90.SURGERY.

USING PRY BAR,BAR SLIPPED CAUSING MID-BACK TO TWIST SHARPLY;PAIN GOT MUCH WORSE AFTER TAKING A PALLET OFF THE FORKLIFT ON 10-11-89.

PULLING ON COME A LONG, STRUCK ELBOW ON TAKE UP FRAME MISSING TIME ON 9-25-89 HAND AND ELBOW STARTED TO SWELL

USING CHAIN BLOCK AND PULLED DOWN WITH RIGHT ARM, FELT EXTREME PAIN IN RIGHT SHOULDER AREA.

USING PRY BAR TO RAISE A TRAP DOOR AND STRAINED HIS UPPER BACK.

EMPLOYEE WAS ATTEMPTING TO REMOVE A ROPE THAT WAS TIED TO A RUBBER PUMP HOSE WHEN HIS KNIFE SLIPPED SLASHING HIS LEFT THUMB. EMPLOYEE RECEIVED SEVERAL SUTURES TO CLOSE THE INJURY.

EMPLOYEE WAS TRYING TO LOOSEN A BOLT WITH A 1/2 INCH RATCHET AND STRAINED HIS BACK.

EMPL WAS USING A WRENCH TO LOOSEN A NUT WHEN THE WRENCH SLIPPED HE LACERATED HIS FINGER WORKING WITH SUTURES

EMPL WAS SETTING BITS ON MINER USING A SLEDGE HAMMER WHEN HE STRUCK THE BIT HE HAD PAIN IN HIS WRIST

MINER WAS BREAKING ROCK ON LONGWALL WHEN HE HIT HIS HAND ON THE ROCK, CUTTING IT. WORKING WITH SUTURES.

EMPLOYEE WAS CUTTING A BELT WITH A UTLITY KNIFE. KNIFE SLIPPED AND CUT HIS LEFT KNEE. LACERATION REQUIRING SUTURES.

EMPLOYEE WAS REMOVING PINS WITH COMEALONG & CHAIN THE COMEALONG SLIPPED & PIN FELL & HIT LEFT INDEX FINGER

EMPLOYEE WAS WORKING IN PREP PLANT WITH CO-WORKERS WHEN PRYBAR FELL ON HIS FOOT.

CUTTING BALL OF TAPE INTO WHEN KNIFE SLIPPED CUTTING RIGHT THIGH.

PULLING WINCH ROPE OFF WINCH WHEN END FLEW UP STRICKING MINER ACROSS LEFT CHEEK AND EYELID.

EMPLOYEE WAS SHOVELING ON BELTLINE & SAID HER BACK STARTED TO HURT & WENT HOME

CUTTING CABLE TO MAKE A SPLICE KNIFE SLIPPED & CUT RT THUMB WORKIG WITH SUTURES