Search the record

INJURED EE ALONG WITH ANOTHER EE WAS MOVING A 150 GAL. OIL TANK, INSIDE A LUBE TRUCK. ONE EE WAS USING A PRY BAR TO MOVE TANK, TANK BROKE LOOSE, AND CAUGHT EE'S THUMB BETWEEN ANOTHER TANK, FRA CTURING THUMB AND CUTTING IT. EE WAS TREATED AT THE HOSPITAL E.R. AND RELEASED BACK TO WORK.

EE'S CHIN WAS LACERATED AND TWO TEETH BROKEN WHEN THE PIPE HE WAS USING TO TIGHTEN A CHAIN AND BINDER ASSEMBLY SLIPPED OFF THE BINDER AND STRUCK HIM IN THE CHIN/MOUTH. TH CHIN LACERATION REQUI RED SUTURING AND CROWNS WERE AFFIXED TO THE TWO BROKEN TEETH.

EE WAS CUTTING A PIECE OF 1/2 INCH AIR HOSE WITH A BOX KNIFE THE HOSE THEN AND THE EE CUT HIS LEFT INDEX FINGER IT TOOK S SUTURES TO CLOSE THE CUT. HE WAS RELEASE TO COME BACK TO WORK.

EE WAS USING A SOCKET AND RATCHET TO TIGHTEN A NUT. THE SOCKET SLIPPED OFF THE NUT AND THE EE CUT HIS LEFT MIDDLE FINGER ON A SHARP PIECE OF TIN. IT TOOK 5 STITCHES TO CLOSE THE CUT.

EE WAS USING A UTILITY KNIFE, CUTTING THE OUTER JACKET OF A TRAIL CABLE, & THE KNIFE SLIPPED & CUT HIS LEFT FOREARM REQUIRING SEVEN STITCHES TO CLOSE THE CUT. THE EE WAS TREATED AT THE HOSPITA L ER & HE WAS RELEASED FOR REGULAR WORK.

WAS CHANGING AN HYDRAULIC FITTING ON JACK, THERE WAS PRESSURE BEHIND THE FITTING CAUSING THE FITTING TO FLY OFF AND HIT EE'S LEFT HAND.

USING POTA POWER, USED BAR FOR HANDLE, BAR SLIPPED HITTING HIM IN THE CHIN.

THE ALLEGDED ACC OCCURRED WHILE THE EE WAS RELEASING THE TENSION OFF OF A CONVERYOR BELT CLAMP USING A 11/2" WRENCH. HE STARTED TO PULL THE NUT LOOSE ON THE CLAMP BOLT AND SUFFERED A PIERCING BURNING PAIN IN HIS LOWER LEFT SIDE OF THE BACK

EMPLOYEE WAS REMOVING A TOPER LOCK FROM A SHAFT ON A CONVEYOR ROLL. HIS WRENCH SLIPPED AND CUT HIS RIGHT FOREARM ON A PIECE OF TIN THAT WAS COVERING THE CONVEYOR ROLL. IT TOOK 5 SUTURES TO CLO SE THE CUT. EMPLOYEE WAS RELEASED BY THE HOSPITAL ER TO RETURN TO FULL DUTY.

WHILE TIGHTENING A PLUG ON A PIECE OF MACHINERY WITH A RATCHET, THE RATCHET SLIPPED & HIT HIM INTHE MOUTH.

EMPLOYEE WS WORKING FROM A MANLIFT BASKET, 15' ABOVE THE SHOP FLOOR, REMOVINGA PIVOT PIN FORM A 190 TON HAUL TRUCK TAILGATE. WHEN THE PIN CAME OUT, THE TAILGATE MOVED DOWNWARD AND THE END OF T HE TAILGATE HIT EMPLOYEE KNOCKIGN HIM OUT OF THE BASKET TO THE SHOP FLOOR. HE FRACTURED HIS RIGHT KNEE, MINOR FRCTURES TO RIGHT WRIST AND RIGHT SIDE OF FACE.

EE WAS LEVEL A TRAILER. HIS LEFT HAND WA ON THE FOOT OF THE JACK STAND. WHEN EE PULLED THE PIN OUT OF THE HOLE TO ADJUST THE STAND, THE SPRING LOADED STAND RETRACTED. EE'S LEFT INDEX FINGER WA S CAUGHT IN A PIN HOLW, CUTTING THE FINGER.

EMPLOYEE WAS USING A 5 FOOT PRY BAR TO BRAKE UPA COAL BLOCKAGE INA CHUTE BELOW THE CRUSHER. THE BAR WAS FORCED DOWN BY THE COAL AND THE OTHER END OF THE BAR PINNED THEEMPLOYEES HEAD BETWEEN THE BAR AND THE CEILING OF THE COLLECTION BELT WAS RESCUED BY OTHER EMPLOYEES. EMPLOYEE WAS ADMITTED TO THE HOSPITAL FOR OBSERVATION. HE HAD NO MAJOR INJURIES BUT WAS UNCONSCIOUS FOR SEVERZ

EMPLOYEE WAS TAPPING BOLTS OUT OF SADDLE CLAMP ON SWIVEL OF DM40 SP DRILL WITH A 3 LB HAMMER. AS HE HIT THE BOLTS, THE MOUNT SADDLE AND SWIVEL CAME LOOSE AND FELL ABOUT ONE FOOT DOWN ONTO THE PULL CHAINS. AS THE MOUNT SADDLE FELL, STRIKINGTHE HAMMER, THE WELDER'S LEFT INDEX FINGER WAS PINCHED BETWEEN THE HAMMER HANDLE AND THE MAST FRAME.

EMPLOYEE WAS ASSIST ING THE FIELD MAINTENANCE CREW TURN SHOVEL TEETH HE WAS TAPPING A TOOTH ONTO AN ADAPTOR WITH A HAMMER WHEN A FRAGMENT OF THE TOOTH STRUCK HIM IN THE LIP

HE WAS USING RAZOR TO STRIP WIRE WHILE HE WAS HOLDING THE WIRE IN HIS LEFT HAND THE KNIFE SLIPPED OFF WIRE & PENETRATED LEFT WRIST

HAND FELT NUMB MAYBE FROM MOPPING.DIDNT THINK IT WAS ANYTHING BUT NEVER WENT AWAY SO WENT TO DR 1-14-92.

THE EMPLOYEE WAS LOOSENING BOLT ON HATCH THAT LEADS TO THE COLLECTOR RING AREA ON A BE295 SHOVEL.WHEN THE LAST BOLT WAS REMOVED THE HATCH FELL WHICH IN RETURN CUT THE EMPLOYEES EAR.

EMPLOYEE WAS PULLING BANDING AROUND INSULATION PLIERS SLIPPED HITTING EMPLOYEE IN THE MOUTH,CHIPPING FRONT TEETH.

OPERATOR GOT OUT OF BACKHOE TO HELP BREAK A PIECE OF CONCRETE OFF FROM A PVC PIPE. ON THE FIRST SWING OF THE HAMMER AGAINST A CHISEL, A SMALL PIECE OF THE CHISEL HEAD BROKE OFF AND LODGED INTO HIS ARM ON INSIDE OF ELBOW.

PC OF PIPE OVER BOOMER IT RELEASE THROWING PIPE TO EMP HIT I N R CHEEK CUTTING IT

EMPLOYEE WAS BENT OVER TRUCK ENGINE CHANING SPARK PLUGS AND PULLED LOWER BACK MUSCLE.

EMPLOYEE WAS REMOVING A SHOVEL BUCKET TOOTH FROM BUCKET ADAPTOR, WHEN TOOTH SPRANG FOREWARD STRIKING EMPLOYEE'S LEFT SHIN.

EMPLOYEE WAS CUTTING A PLASTIC TYPE WRAP OFF OF LUNCH BOX WITH CARPET KNIFE,RECEIVED A 2 CENTIMETER LACERATION TO RIGHT THUMB.

EMPL REMOVING FANBELT ON TRUCK 271.12 WITH PRYBAR.IT SLIPPED WHEN BELT JUMPED OFF SHEAVE CUTTING LEFT SIDE OF NOSE.

REMOVING EXCITER FROM ENGINE,EXCITER CAME LOOSE FROM HOIST,PINCHING RIGHT FOREARM BETWEEN EXITER AND GENERATOR.

EMPLOYEE WAS USING A TORGUE WRENCH, PULLING ON IT AND INJURED HIS BACK.

EMPLOYEE WAS BREAKING OFF A CONCRETE NAIL WHEN IT BROKE AND FLEW BACK, HITTING HIM IN HIS EYE (EMPLOYEE HAD SAFETY GLASSES ON).

EMPLOYEE WAS REPLACING HANDRAIL GUARD ON THE CRANE ACCESS DOORS ON SILO 1 WITH THE CHAIN HOIST. WHILE HE WAS GUIDING THE HANDRAIL INTO THE SOCKETS THE HOOK ON THE CHAIN HOIST SLIPPED AND PINCH THE LITTLE FINGER ON HIS RIGHT HAND.

DRIVING PULL IN3IN TIGHT AREA FROM UNDER SIDE.SWUNG 4 LB HAMMER TOWARD SELF,MISSED AND HIT HIMSEELF IN MOUTH AND SPLIT LIP 1/2''.

LACERATED FINGE9 WHILE CUTTING PLASTIC GLOBE FROM END OF WHIP LIGHT USING POCKET KNIFE

PUMPERS WERE CU7TING PACKING BANDS OFF OF STACKS OF POLY PIPE THEY WERE USING A CRESCENT WRENCH WHEN THE BAND BROKE IT STRUCK EMPLOYEE IN THE MOUTH AND EITHER BAND OR NAIL CAUGHT EMPLOYEES RT WRIST EMPLOYEES3WERE USING IMPROPER TOOLS FOR THE JOB

EMPLOYEE WAS PU5LING THE RT WHEEL MOTOR ARMATURE ON TR 226.12 USING A ARMATURE FIXTURE WHEN HE THE OLD ARMATURE CAME LOOSE FROM THE INNER BEARING IT JERKED THE HOLDING AND GUIDING FIXTURE WHI CH I.NAME WAS H2LDING ON TO THE JERKING MOTION CAUSED A OVEREXTENSION OF THE LEFT ELBOW

WHILE REMOVING 3/8 INCH BOLTS FROM A TRUCK MOUNT TOOL BOX WITH A COMBINATION WRENCH AND AN IMPACT WRENCH THE EMPLOYEES RIGHT HAND TWISTED. THIS CAUSED THE RIGHT THUMB TO BE FROCE INTO THE SH EET METAL OF TH9 TRUCK BOX.

WHILE INSTALLIN1 A PLANETARY THE MECHANIC WAS INSTRUCTED TO HOLD A SPANNER WRENCH WHILE TIGHTENING THE SPINDLE. WHEN THE WRENCH WAS REMOVED FROM THE OPPOSITE SIDE, THE GEAR FELL CATCHING THE M ECHANICS FINGER8 BETWEEN THE SPANNER WRENCH AND THE RING GEAR AREA

EMP WAS INSTALLING COUPLER BETWEEN MOTOR AND HYD #4 SILO WAS PRYING UP ON COUPLER TO ALIGN BOLTHOLES WITH BAR AND IT SLIPPED HIS HAND HIT THE PUMP BRACKET THERE WAS ROUGH SPOT ON BRAKCET THAT MUST HAVE CUT HIS FINGER

EMPLOYEE WAS USING A POCKET KNIFE TO OPEN A BLISTON PACK. THE POCKET KNIFE WENT THROUGH THE CARDBOARD BACKING AND CUT THE LEFT MIDDLE FINGER TIP.

EMPLOYEE WAS CUTTING THE OLD WOM PLATE ALL OF HOWALL LOADER. AFTER FINISHING THE GIT THE PIECE OF METAL DID NOT FALL OFF. EMPLOYEE PROCEDED TO STRIKEING PLATTER WITH HAMMER TO JAR IT LOOSE. DI D NOT WORK. HE STEPPED OUT FROM UNDER THE BUCKET AND METAL OBJECT WHICH HAD BEEN RUSTING ON OR HTHE BUCKET A METAL OBJECT WHEN HAD BEEN RUSTING ON OR ACROSS THE BUCKET EDGE FELL STRIKING EMPL

EMPLOYEE WAS CUTTING RUBBER BELTING WITH RAZOR KNIFE KNIFE SLIPED AND CUT VICTIMS RT MIDDLE FINGER & RT WRIST SIX (6) SUTURES WERE REQUIRED IN FINGER & TWO (2) IN THE WRIST

EMPLOYEE PLACED MAT ON TOP OF NEW RUBBER TO CUT NEW MAT, WHEN THE TILE KNIFE HIT THE ANTI-FREEZE IT SLIPPED AND THE KNIFE CUT THE RIGHT SIDE OF RIGHT KNEE

EMPLOYEE WAS INSTALLING A CAP 4" CAP ON A TEE ON THE HOIST CASE EXHAUST BLOWER. AS HE DROVE THE CAP ON WITH A HAMMER HE HIT HIS LEFT RING FINGER WITH THE HAMMER.

MECHANIC WAS INSTALLING THE LEFT EXHAUST BELL ON TRUCK WHEN HE WAS DRIVING THE BELL ON HE HIT HIS LEFT FINGER WITH A HAMMER

EE WAS PRYING A PIECE OF STRAP METAL FROM A TANK. WHEN THE WELD HOLDING THE STRAP BROKE LOOSE THE PRY BAR SLIPPED & STRUCK THE VICTIM.

EMPLOYEE WAS INSTALLING TOOTH ADAPTER WEDGE ON BE 295B SHOVEL WHILE DRIVING WEDGE INTO THE TOOTH A PIECE OF STEEL BROKE OFF AND BECAME EMBEDDED IN VICTIMS RIGHT HAND SUTURES WERE REQUIRED TO C LOSE THE WOUND

EMPLOYEE WAS TRIMMING SIDESHIELDS ON SAFETY GLASSES WITH POCKET KNIFE. WAS SITTING IN DOZER, CUTTING TOWARDS HIS RIGHT THIGH. KNIFE SLIPPED OFF GLASSES AND STUCK IN HIS LEG.

EE WAS WASHING DOWN SILOS WITH HOSE COMING THROUGH SILO & OUT LOAD-OUT CHUTE. TURNED OFF HOSE FOR ANOTHER EE TO WALK BY WHEN HOSE BLEW APART STRIKING EE IN STOMACH. HAND WAS CUT BY HOSE CLAMP S.

HOLDING DRIVING BAR OVER TOOTH SHANK AT SLIGHT ANGLE WHILE OTHER EMPL SWUNG 16 LB SLEDGE TO STRIKE BAR AND DRIVE TOOTH WEDGE PIN OUT.OTHER EMPOL MISSED AND STRUCK EMPL ON RIGHT HAND LITTLE FIN