Search the record

DRILLING HOLE WITH ELECTRIC HAND DRILL. DRILL BIT BROKE CAUSING DRILL TO TWIST INTO EQUIPMENT BREAKING LITTLE FINGER ON RIGHT HAND. OFFSITE SHOP INJURY.

38505MPLOYEE WAS OPERATING A BUG DUSTER DRILL.HE WAS DRILLING HOLES IN THE RIB TO HANG HIGH VOLTAGE CABLE.COAL DUST WAS BLOWN BACK INTO HIS EYES(SAFETY GLASSES ARE PROVIDED TO EMPLOYEE'S).

EE WAS RUNNING ROOF BOLTER WHEN PIECE OF ROCK APPROX. 8 INCHES THICK CAME OUT OF ROOF AND SLIP OFF HIS ATRS CANOPY WHEN EE TURNED TO RUN ROCK STRUCK HIM ON RIGHT CALF MUSCLE CUTTING IT.

PINNER SLID DOWN THE HILL PINNING HIM AGAINST RIB HURT L HIP AND PELVIS

WENT TO PIN 1 ENTRY STARTED ON LEFT SIDE TO PUT UP HIS FIRST PIN A PIECE OF GOB FELL DRIVING ALLENS HEAD AND CHIN INTO THE PINNER.

OPER RF BOLTER ROCK FELL STRUCK HI S R ARM

EMPLOYEE WAS OPERATING ROOF BOLTER WHEN A FRAGMENT OF COAL FLEW INTO HIS EYE.

EMPLOYEE WAS WELDING, HOT SLAG POPPED IN RIGHT EYE.

HH WAS OPERATING ROOF BOLTER WHEN A PIECE OF DRAW SLATE STRUCK HIM IN THE LOWER LEFT LEG. HH SUFFERED SEVERE BRUISING, BUT X-RAYS REVEALED NO BREAKS OR FRACTURES.

BOLTING RF ROCK FELL ON HEAD AND NECK BRUISE NECK

EMPLOYEE WAS STANDING BESIDE THE CONTINUOUS MINER WHEN A SMALL PIECE OF COAL/ROCK FLEW FROM THE SHEAR HEAD STRIKING HIM IN HIS LEFT EYE. THIS RESULTED IN A CUT TO HIS EYE. SLIGHT INJURY.

EMPLOYEE WAS TRAMMING MINER WHEN HE JAMMED HIS HEAD INTO THE MINE ROOF.

EMPLOYEE WAS BENDING 5FT ROOF BOLT PRIOR TO INSTALLING IT INTO ROOF WHEN HE HURT HS RIGHT ARM (PROBABLY PULLED MUSCLE)

ROCK FELL FROM FACE AS OPERATOR WAS PUTTING UP IN. ROCK FELL ON ANKLE AND BRUISED IT.

EE WAS BOLTING A HIGH PLACE IN THE ROOF WHEN A ROCK APPROX. 2 INCH SQUARE SLID OFF ATRS CANOPY AND SWD ONTO THE EE STRIKING HER IN THE LOWER BACK THE LOWER BACK AREA WAS BRUISED.

PINNING IN FACE OF #4 ENTRY PIECE OF DRAW ROCK 3-4" THICK X 3'WIDE X 4'LONG FELL CATCHING HIM IN LOWER BACK.WAS TOLD DRAW ROCK WAS COMING DOWN,TO MOVE OUT.HE HESITATED FOR JUST A MINUTE -GAVE ROCK TIME TO FALL.

MINER CUTTING ROOF ROCK TO MAKE HEADROOM FOR BELT DRIVE.1' ROCK FELL ONTO MINER SLIDING ONTO MINER OPER.INJURIES LTD TO BRUISES AND ABRASIONS.

ROCK BROKE OUT AT END OF T.R.S. ON PINNER FALLING ON HIS LEG OCCURRED AT #89 CROSSCUT, #1 ENTRY.

HE WAS PINNING TOP WHEN A PIECE OF PINNER STEEL FELL FROM THE ROOF AND INJURED HIS MIDDLE FINGER OF THE LEFT HAND.

EE WAS WORKING OUTSIDE WITH A CO-WORKER WHO WAS WELDING. HE WAS NOT WEARING SHADED EYE PROTECTION AND HIS EYES BECAME IRRITATED DUE TO THE FLASH OF THE ARC WELDER.

IRON PLATE USED FORM ROOF STANDS FELL ON HAND WHILE HE WAS RUNNING THE ROOF BOLTER.

I,NAME WAS DRILLING THE HOLE TO INSTALL THE PIN HE TURN THE WRENCH LOOSE & WAS HOLDING THE ROTATION ON. IT THROWED THE WRENCH OUT HITTING HIM ON THE CHEEK & EYE BREAKING HIS GLASSES.

HE WAS DRILLING A PIN HOLE, PINNER STEEL FELL OUT AND HIT HIM ON THE HAND.

A PIECE OF DRAW ROCK FELL & CUT I.NAME ON HIS RT.ARM ROCK WAS ABOUT 4IN.THICJH 1.5IN.BY2FT.

HE HAD RUN STARTER STEEL INTO THE ROOF AND THEN HE WAS GOING TO COMPLETE HOLE. HE DIDN'T GET IT COUPLED UP. TOP ONE FELL OUT AND CAUGHT HIS FIGNER BETWEEN THE TOP STEEL AND BOTTOM STEEL.

ROCK CAME OFF BOOM OF MINER HIT CAR DRIVER IN MOUTH BUSTED LIP BROKE TOOTH OUT OF UPPER PLATE BROKE LOWER PLATE

EMPL WAS PINNING TOP IN #3 ENTRY AT FACE. HE TWISTED HIS KNEE.

ROCK FELL FROM 7HE ROOF ON THE RT HAND RIB STRIKING I NAME ON R T SHOULDER AND SIDE. HE HAD SCRAPES AND BRUISES ON RT SHOULDER AND SIDE. HE WAS SENT TO THE HOSP FOR EXAM

A PIECE OF LOOS9 DRAW ROCK ABOUT 18" IN DIA. 3-4" THICK, BECAME DISLODGED WHEN THE OPERATOR STARTED HIS STEEL HITTING HIM ON THE BACK OF THE NECK AND RIGHT SHOULDER.