Search the record

WHILE USING A CHAIN HOIST TO LIFT A CELL SHAFT THE HOIST CONTROLS MALFUNCTIONED MAKING IT IMPOSSIBLE TO STOP THE HOIST. WHEN THE HOIST WOULD NOT STOP THE LOAD BROKE THE LIFTING STRAP, CAUSING EE WHO WAS GUIDING THE SHAFT TO FALL. THE EEE INJURED HIS LOWER BACK IN THE FALL.

WHILE CLEANING AROUND A PULVERIZER, THE PULVERIZER WAS INADVERTANTLY ENERGIZED. THE SURPRISED TECHNICIAN PULLED HIS HAND AWAY REACTIVELY, CUTTING HIS RIGHT HAND ON THE MOVING BLADES.

THE EE WAS DRILLING HOLES IN SHEET METAL WHEN THE METAL SLIPPED CUTTING THE MIDDLE FINGER ON HISRIGHT HAND. THE EE DID NOT SEEK MED TREATMENT UNTIL 9/9 BY THAT TIME THE WOUND WAS INFECTED, MAK ING IT A REPORTABLE INCIDENT.NOTE 3S4 WAS NOT NOTIFIED UNTIL 9/24/98

EE WAS SEATED IN OPERATORS POSITION WHEN BAG CHAIR/SADDLE DROPPED LOOSE. HE LEANED FORWARD AND DOWN TO REACT & PLACE BACK IN SLOT. HIS HEADHIT START FILL BUTTON ACTIVITATING PNEUMATIC CYL INDOR CAUSING IT TO PINCH THUMB

MINER WAS PLACING BAG CHAIR BACK ON BAGGER, ENGAGED HYDRAULIC SYSTEM ACCIDENTALLY WITH LEFT SHOULDER, CAUSING HYDRAULIC SYSTEM TO ACTIVATE, PINNING THUMB BETWEEN BAGGER, BAG CHAIR AND RAIL. RE QUIRED BUTTERFLY STITCHES. EE FAILED TO DISENGAGE SYSTEM & USE INSTALLED CUT-OFF.

REMOVING DISCHARGE LINE FROM FILTRATE PUMP. WHENPIPE WAS REMOVED VACUUM BEGAN TO TURN PUMP BACKWARDS AT A HIGH RATE OF SPEED. SHEAVE CAME APART,WENT THROUGH BELT GUARD HITTING EMPLOYEE IN LOWE R LEFT LEG.

COPLER OLDING PLATE LACERATION INDEX FINGER.

WAS USING FLOOR SWEEPER TO CLEAN FLOOR IN WAREHOUSE AND RIGHT THIGH WAS HIT BY PALLET CAUSING SPLINTERS TO GO INTO THIGH.

WELDING ANND A PIECE OF METAL GOT INTO EYE.

WENT OUTSIDE OZONE BUILDING TO CHECK PRODUCT PUMP.PRODUCT SUMP WAS RUNNING OVER AND THE FUMES FROM THE OZONE PRODUCT TOOK EMPLOYEES BREATH AWAY.

EMPLOYEE STATES HE WAS LOADING A CAR WITH A BIOCIDE WHEN THE LINE BLEW A SMALL PIN HOLE SPRAYING THE EMPLOYEE'S RIGHT SHOUDER CAUSING A CHEMICAL BURN.

EE STATES HEHAD CLEANED STRAINERS AND PLACED BACK TOGETHER. HE HAD OPERATOR TO START UP PUMP & IT BLEW HOS APART SPRAYING CHEMICAL INTO MILLWRIGHT'S EYE. EE WA SNOT WEARING SAFETY GOGGLES DURI NG TIME OF TESTING.

WHILE BLOWING OUT FROM UNDER BAGGER WITH ANOTHER EE AND TRASH BLEW IN EYES.

AMMONIA ROTOMETER BUSTED AND OPERATOR TRIED TO CUT FEED VALVE OFF AND WAS OVERCOME BY FUMES.

REMOVING BOWL FROM PULVERIZER, BLADES HAD NOT STOPPED. BOLW SLIPPED OUT OF HAND & REFLEX MADE HIM GRAB TO CATCH BOWL & FINGERS GOT IN THE BLADES.

REPLACING TOP ON STEAM TANK GRINDING ROUGH AREAS DOWN & CUT FINGER ON A PIECE OF ROUGH STEEL NOT YET GRINDED DOWN.

WHILE GRINDING ON BIRD SCROLL, A PIECE OF METAL GOT IN EYE.

SOMETHING ENTERED EMPLOYEE'S RIGHT EYE WHILE WORKING AT BACK DOOR OF SHOP.HE HAD SAFETY GLASSES WITH SIDE SHIELDS ON.THERE WERE OTHER WORKERS GRINDING AND DRILLING IN THE SHOP AREA AT TIME OF ACCIDENT.HE WASHED THE EYE OUT AND HAD NO PROBLEMS UNTIL 04-05-93.WAS SENT TO DOCTOR WHO REMOVED A FOREIGN OBJECT FROM RIGHT EYE.

WELDING MAT FOREIGH BODY REMOVED

WELDING MATERIAL AND RECEIVED BURN TO EYE.

EMPLOYEE WAS INSTALLING BACKWASH SPRAYER BAR, THE BAR CAME INTO CONTACT WITH ROTATING ROTARY SCREENS & FORCED BAR OUT OF HOLE & HIT EMPL ON THE FOREHEAD.

WELDING MAT BURN EYE.

PARTY INVOLVED WAS CLEANING OUT UNDER GRIZZLY HOPER WITH A SKID STEER. THIS CLEANING IS ALWAYS DONE WITH A LARGE LOADER. PARTY DID NTO COMMUNICATE THIS TASK WITH LOADER OPERATOR THAT LOADS T HIS HOPPER. WHILE PARTY WAS CLEANING HE WAS HIT WITH ROCKS ON LEFT HAND AND RIGHT LEG.

71329NG PULLER BROKE AND CUT EMPLOYEE'S LEFT HAND/MIDDLE FINGER. EMPLOYEE RECEIVED 6 STICHES IN HAND.

EMPLOYEE CUT HIS HAND ON A DOCTOR BLADE IN THE DIAMOND INTERNATIONAL PRESS.

65349NG BURN TO EYE.

I.NAME HOLDING ONTO A PIECE OF EQUIPMENT BEING LIFTED.THE LIFTING CHAIN BROKE AND I.NAME FELL BACK LANDING ON HIS BACK AND HEAD ON QUARRY FLOOR.

WELDING MATERIAL, CORNEAL BURN.

EE WAS CUTTING BLADES OFF BLUNGER WITH TORCH AND HOT METAL POPPED INTO MOUTH AND BURNT A HOLE IN HIS TOOTH.

WELDING MATERIALS & BURNED (R) EAR

WELDING MATERIALS AND REVEICED BURNS TO EYES.

HE WAS CUTTING A PIECE OF SHEETING & CUT ARM.

EMPL POURING OIL THROUGH INSPECTION OPENING ON GEAR GUARD.THE RAG BEING USED TO WIPE OIL OFF HUNG ON A GEAR PULLING FINGER AGAINST THE GEAF AND GUARD CAUSING RIGHT MIDDLE FINGER TO BE LACERATE D.SOME STITCHING WAS REQUIRED.

EE WAS HOLDING ONE END OF A BELT WIPER AS EE WAS WELDING THE OTHER END. WHEN THE WIPER WAS SUPPOSED TO BE TACKED IT FELL AND CAUGHT HIS WRIST ON TOP OF THE SCREEN BOX.

PUNCHING HOLES IN SHORT PC OF FLAT STEEL STRIPS PUNCH HUNG IN METAL AS HE WAS PUNCHING HOLES SNATCHED L HAND IN PC OF METAL MASHING AND TEARING L INDEX FINGER 1ST JOINT

WELDING ON SWECO SCREEN PART AND WHEN HE GOT THROUGH, FLIPPED UP HOOD AND SLAG POPPED IN RIGHT EYE.

EMPLOYEE WAS REMOVING A LOGWAHER PADDLE WHEN ONE OF THE MOUNTING BOLTS MOVED OUT WARD AND SPUN CUTTING THE EMPLOYEES LEFT HAND WITH THE SHARP HEAD OF THE BOLT.

EMPLOYEE WAS GRINDING WITH HIGH SPPED STRIGHT END GRINDER ON A PIECE OF 2" TUBING WHIHC INJURED WAS HOLDING. THE GRINDER WHEEL BROKE OFF AND THE PART THAT WAS LEFT ON THE GRINDER PENETRATED T HE INJURED'S LEFT HAND BELOW LITTLE FINGER ON SIDE OF JOIN CAPSULE.

RUNNING A HOLE PUNCH & PUNCH EXPLODED & PIECE OF STEEL GOT IN HAND

DRILLING HOLE IN STEEL PULLED ARM

EMPLOYEE WAS WELDING MAIN-FRAME LINERS IN CRUSHER. HIS EYES DIDN'T BOTHER HIM UNTIL HE WENT HOME. HE APPARENTLY RECEIVED FLASH BURNS EVENTHOUGH HE USED A PROPER WELDING HOOD. NO PERMANENT INJU RY AND MISSED NO WORK.

WELDING FB IN R EYE

EMPL REMOVING NUT FROMA SOCKET ON IMPACT WRENCH ,TRIPPED THE TRIGGER DRIVING NUT ONTO FINGER.

EE WAS WELDING INSIDE OPEN TOP CONTAINER TANK HAD BEEN SPRAYED WITH NOZZLE SHIELD AND ANTI SPATTER SPRAY SPATTER SPRAY CONTAINS 1,1,1, TRICHLORETHARP SPRAYING TANKS WITH ANTI SPATTER HAS BEEN COMMON PRACTICE.

WHILE EMPLOYEE WS USING LEVER TOT IGHTEN MIXER TO STAND, THE LEVER BROKE, CAUSING EMPLOYEES HAND AND WRIST TO STRIKE STAND AND CONCRETE SLAB.

HEATING SHEET METAL WITH HEATING TORCH.

LAYI NG ON SIDE WELDING OVERHEAD AT FEEDER DIRT FLEW INSIDE HOOD

THREADING 2" CONDUIT WITH PIPE THREADER.CONDUIT HUNG UP IN TOOL AND THREW HIM OVER THE PIPE THREADER.WAS BRUISED IN GOIN AREA.WORKING BY HIMSELF,REPORTED ACCIDENT & CONT WORKING REST OF DAY.HA D BEEN TOLD TO PUT RETAINING ARM ON 700 UNIT.

EMPLOYWW ENTERED BLEACH ROOM THROUGH REAR DOOR, NOT KNOWING THAT THERE WAS AN ACID LEAK IN ACID LINE, ACID WAS SPRAYED INTO HIS LEFT EYE.

EMPLOYEE WAS WELDING STAINLESS PIPE, LIFTED HELMET AND WELDING SLAG POPPED OFF OF PIPE INTO LEFT EYE.