Search the record

EE WAS DRIVING A RUBBER TIRED BACKHOE WHEN HE HIT A BUMP CAUSING DUST TO FLY UP FROM THE BUCKET. DUST GOT IN HIS EYE, HE RUBBED IT AND SCRATCHED HIS CORNER. DAYS LOST 7/26,27,28 (LOST TIME)

EMPLOYEE(BAGGER) WAS ATTEMPTING TO ADJUST COUNTERWEIGHT ON JET-FLOW BAG MACHINE WITHOUT TURNING MACHINE OFF. TRIP LEVER ON THE SPOUT WAS ACTIVATED AND CRACKED EMPLOYEE'S RIGHT THUMB. EMPLOYEE WAS PUT ON LIGHT DUTY.

CAPPING OVER DUMP AREA AT MINE, EE WAS RUNNING A DOZER OVER LARGE CLUMPS OF CLAY BREAKING THEM UP. DOZER TRAVELED OVER A LUMP THAT FAILED TO BREAK UP CAUSING THE FRONT OF DOZER TO FALL ABOUT 3 FT DOWN ALL AT ONCE WHEN DOZER BECAME OVER BALANCED. THE FORCE OF DOZER COMING TEA SUDDENT STOP TOSSED HIS BODY TO THE SIDE WHERE HIS HEAD STRUCK SIDE SUPPORT POST IN CAB. EE RECEIVED A 4" LA

EE WAS GUIDING DENSIFYIER SCREW TO GROUND, DURING THE UNLOADING WHEN THE SCREW TWISTED & PINNED HIS HAND ON THE GROUND.

MECHANICS WERE PREPARING TO MOVE BACKHOE 85 FOR SERVICE. EE WALKED AROUND TO REMOVE PIN AND OTHE EE--IN OPERATOR'S SEAT00SWUNG THE BACKHOE AROUND, CAUSING BOOM TO HIT EE IN THE RIGHT SHOULDER.

EE HIT HIS LEFT ELBOW AGAINST THE CORNER OF A METAL FABRICATION TABLE. NOT DETERMINED TO BE RELATED TO THIS INCIDENT UNTIL.

EMP WAS RELEASING PRESSURE ON A 4" HOSE. LINE NEXT TO IT STARTED SPRAYING LIQUID CLAY. AS HE TURNED AWAY FROM THE SPRAY HE CAUGHT HIS LEG ON ANOTHER VALVE HANDLE. STITCHES.

EMPLOYEE WAS LIFTING A 60 HP ELECTRICAL MOTOR WITH A BOOM TURCK WHEN THE LIFTING EYE STRIPPED OUT OF THE MOTOR HOUSING. THE MOTOR BRUISED HIS RIGHT FOOT.

EMPLOYEE INHALLED AMMONIA FUMES FROM UNPLANNED DISCHARGE HEATER MESSAGE SWITCH STUCK CAUSING EXCESSIVE PRESSURE & DISCHARGE

EE WAS WORKING INSIDE A CACLINER AND DURING THE COURSE OF WORK, WHILE WEARING HIS SAFETY GLASSES, HIS EYES WERE BURNED BY THE WELDING FLASHES.

EE WAS WELDING & HIS EYES WERE BURNED BY THE WELDING FLASH.

GOT FOREIGN DEBRIS IN EYE OPER DRAGLINE

WELDING AND INADVERTENTYL FLASH BURNED HIS EYES

ATTEMP TO CLEAN OUT BIN ROTARY VALVE RUNNING AND FINGER CUT BY VALVES ON ROTARY.

EMPLOYEE WAS HOLDING A BOARD WHILE 17 WAS BEING SAWED. SOME SAW DUST FLEW UP AND GOT INTO HIS EYE.

EMPLOYEE GOT SOME FOREIGN MATERIAL IN HIS EYES WHILE WORKING ON THE VALVES OF A JOY AIR COMPRESSOR.

EMPL WAS DROPPING CASING ON #1 DISCHARGE SCREW AT #2 CALLINGER WHEN FALLING CLAY GOT INTO HIS EYE.

EMPLOYEE GOT CLAY IN HIS EYE WHEN A HOLE BLEW IN AN FK LINE.

EMP GOT FOREIGN3OBJECT IN HIS EYYE WHEN ANOTHER EMPLOYEE USED AN AIR HOSE TO BLOW OFF A SET OF S CALES

EMPLOYEE WAS MO5ING SOME DRUMS WITH A FORKLIFT WHEN SOME MATERIAL SLOSHED FROM ONE OF THE DRUMS AND GOT INTO HIS LEFT EYE.NOT AWARE PRESCRIPTION WAS MADE FOR EYE SAUVE.CAUSTIC SODA.

EMPLOYEE CLAIMS3SHORTNESS OF BREATH FROM FUMES EMINATING FROM #6 EIMCO HEAD TANKK.

EE HIT HIS KNE9 ON A SWECO SCREEN.

EE WAS OBSERVIN1 THE UNCHOCKING OF #11 BIRD MACHINE WHEN THE TORQUE ARM CAME LOOSE & HIT HIM ABOVE THE RT EYE.

WHILE WELDING S5AG BURNED EMPLOYEES RT ELBOW. DELAYED REPORTING BECAUSE BURN NOT HEALING AND DOCTORS CARE REQUIRED

EMPLOYEE WAS DR3LLING A HOLE IN A PIECE OF 1" RUBBER.THE EMPLOYEE TRIED TO HOLD THE RUBBER TO KEEP IT FROM WRAPPING AROUND THE BIT.THE EMPLOYEE DID NOT RELEASE THE RUBBER AND IT PULLED HIS LEF T THUMB INTO CO3TACT WITH THE BIT.

EMPL CHECKING B5G MACHINE DUST COLLECTOR STARTED FAN.THIS CREATED DRAFT AND CAUSED DOOR TO SHUT ON MIDDLE FINGER OF RIGHT HAND.

EMP WAS REMOVING A BELT GUARD HE DID NOT NOTICE THAT EVEN THOUGH HE HAD TURNED OFF THE DRIVE MOTOR THE MOTOR AND BELTS WERE STILL TURNING HE TOUCHED THE BELT AND IT PULLED HIS FINGERS INTO THE PULLEY SEVERING THE LAST JOINT OF THE INDEX FINGER ON RIGHT HAND

THE INJURED MAN WAS WORKING WITH THE SURVEY CREW. THEIR ASSIGNMENT WAS TO CLEAR A ROAD FOR A DRILL SITE. HE WAS USING A POWER SAW TO CUT DOWN A SMALL TREE. AS HE STARTED TO CUT THE SAW KICKED BACK AND NICKED HIS LEFT KNEE. THE INJURY SUSTAINED WAS A LACERATION REQUIRING FIVE SUTURES.

INJURED MAN WAS ATTACHING A DRILL BIT TO A DRILL ROD THE ROTARY ACTION OF THE DRILL BIT CAUGHT HIS WEDDING BAND CAUSING THE RING TO CUT INTO HIS FINGER THE INJURY SUSTAINED WAS A LACERATION TO HIS RING FINGER NO SUTURES WERE REQUIRED

OPENED VALVE UNDER GRINDER TUB TO DRAIN SAND OUT TO LOWER LOAD.WHEN OPENED VALVE,GRINDER DREW AIR IN FORCING HOT LIQUID KAOLIN OUT OF TOP ONTO BACK.STANDARD PROCEDURE IS TO SHUT GRINDER DOWN W WHEN DRAINING.FIRST DEGREE BURNS WITH SUPERFICIAL 2ND DEGREE BURNS.