Search the record

Pulling air hose, lost balance and landed elbow first onto a hydraulic rock splitter box.

Subject was pulling water hoses across the surface and tripped over a saw track. Subject stated that he was o.k. and refused to go to the doctor. The subject worked the next 4 days. Approximately 7 days after the incident the complainant called into work with a pain in his chest.

Subject was standing next to a dump box and a bar rack fell across the bridge of the subject's left foot.

Employee was loading a spool of hose into the back of the truck when the spool hit an 8' steel rod and it bounced it up hitting employee in the mouth.

Employee was grinidng metal when the metal got caught pulling his finger into grinding wheel

Employee was stung by a bee.

Employee was running his saw when he laid his measuring rod down on the ground where he was working. He went to take a step and tripped on the rod falling to the ground hitting his chest/ribs.

Employee was lying down changing a hose on the haul truck when he rolled over onto some dirt and rocks and felt pain in his side/ribs.

Employee was stepping over track (18") and tripped, when not raising foot high enough, fell hitting his knee/leg.

Employee was standing in maintenance shop when a co worker was playing around and hit him with a stack of shovels he was carrying, in the lower back.

Employee was shoveling when he hit his arm on the track.

Employee was walking across ledge when he slipped in a hole rolling his ankle over and all his weight going onto rolled ankle.

Delivery Driver for Brown's Oil Supply a Kat Supplier. The driver was on back of truck moving a barrel to allow fork lift room to remove. When he was pulling backwards, he stumbled stepping backwards off the back of the trailer falling about 5' to the ground.

Employee was turning on pump, when he was stung by a bee and due to being allergic, he was taken to the ER. Was not given completed accident form until 6/26/08.

Employee was lifting a splitter out of the rock cut, when he felt a strain in his upper rib cage area.

Employee was stepping down from cut with his drill, when he lost his balance, falling approx 5 feet and landing on his left side/ribs.

Employee was shoveling out the tracks on the excavator when he felt a sharp pain in his back.

Employee hurt shoulder on 9/24/07 as a near miss, did not seek treatment until 10/1/07. He was setting airbags and while pulling on an air hose, it got caught on a rock and jerked his shoulder.

Employee was checking the depth of a cut with a measuring rod. When he put the rod into the cut and it slid through his hands to measure, he cut it on the clamp that was attached to the rod.

Employee was moving skids on top of a block, when on skid fell over on his left little finger.

Employee was helping load about 30 pieces of timber when he strained his back on 6/6/07 did not seek treatment until 6/8/07

Employee was shoveling and a splitter that was leaning againist the rock wall, slid down stricking his Left Hand on the way down

Employee was turning off drill when he caught his figure on the banding resulting in a laceration to Left Middle Finger

Employee was carrying blocking (3 ft timber) when he fell into a hole, dropping the blocking on his right middle finger.

Employee was pulling on drill that was stuck in stone on bottom line, when he felt pain in his lower back.

Employee had 3 10-15 lb u-joints in hand when he threw them away into the dumpster, then a knot appeared on his left wrist and hand.

Employee was handling an air manifold and dropped in on his left foot.

Employee was walking around a stone when he slipped and hit his left knee

Employee was breaking track with a rachet wrench when the wrench slipped and pinched his left middle finger.

Employee was walking and stepped on a small rock, causing him to twist his right ankle.

Employee was pulling cable into cherry picker, when he climbed on top of unit and slipped on spool deck hitting his right knee on the counter weight.

Employee was helping lift a saw bar when the other individual let go, causing him to strain his back.

EMPLOYEE WAS SHOVELING WHEN HE REPORTED HIS BACK BEGAN TO HURT.

Employee was blocking track when he slipped in a mud hole and twisted his right knee.

Two employees that were not paying attention to the people or the area surrounding them.

Employee was operating a saw when a rock fell into the cut. The belt then flipped the rock back up striking the employee in the face, left cheek. He was wearing required PPE.

The Employee was drilling into the stone when the drill head started getting build up around it. When he kept trying to pull the drill out of the hole, he strained his lower back.

Employee was using a jack to adjust the track when his hand slipped and he hit his right thumb.

Complacency of employee in placing himself in an unsafe area between two limestone blocks, muddy ground conditions, taking unnecessary risks.

Employee was leaving National Quarry driving to Crown Quarry. He was crossing IN 37 South, the truck side post obstructed his view and he pulled out into the path of another vehicle, striking him in the passenger side.

The Employee complained of back pain due to the repetitive bouncing of the loader seat that he operates everyday

Using a Bloomfield jack in an awkward position due to the ground conditions. Resulting in the employee using the opposite side of his body than he is normally accustomed to resulting in a back strain.

Employee was moving water pump (approx 70 lbs) when he dropped it bruising his right foot.

The Employee was holding the track for the crane operator, when the operator backed up too fast causing the track to swing. The track hit the Employee in the left foot knocking him to the ground

Employee was running to his saw when he tripped over a string line and fell to the ground

Employee was lifting his drill to the top of the cut and dropped it on his right hand, Employee didnt feel the need to seek treatment until after the shift was over.

Employee was operating the drill when the drill bit got caught and wrapped in the employee's pant leg causing it to pinch the left leg

This employee was on the bottom of the quarry and asked for an oil can. An employee from the top line dropped a can. The employee catching it hit a rough edge on the can and cut the tip of his thumb. Employee was given 1st aid on ledge but requested to go to the doctor on 4/16/04 after he super glued the cut. Follow up appt. is on 04/27/04

Unknown - employee doesn't know of a specific incident that his pains began. He did say he was just walking and his knee began to hurt. In his opinion his problem is a result of shoveling the saw cuts.

EMPLOYEE WAS SHOVELING LOOSE GRAVEL WHEN HE STRAINED HIS LEFT WRIST.