Search the record

Employee was drilling a hole through a newly installed CARDOX port in a dust cyclone when the drill bit caught and twisted the drill out of the employees hands.

Employee was removing dust from the Gas Conditioning Tower through the GCT discharge screw. The GCT had been clogged to the point of overloading the reversing and discharge screws. The employee reached in to operate the screw to the truck, when hot material from the GCT and reversing screw directly above employee rained down on lower right arm, wrist and hand.

Employee was coming down from preheater tower. As EE approached the first platform where the stairs change direction, EE mis-stepped on the tread and twisted left ankle. The employee reported that EE was descending the steps with right hand holding the right stair rail which helped EE to avoid losing balance and falling down the stairs.

Employee was entering an emptied compartment of a cement ball grinding mill via a ladder and asked for additional portable lighting. A battery operated rated LED light was "dropped" down to them, striking the employee on the tip of the left hand ring finger, causing a fracture to the finger tip.

Employee was grinding. Face shield fogged. Stopped grinding. Lifted Face Shield. Accumulated dust on shield fell into eyes of employee.

Loosen a back motor base nuts, employee did not brace it, when the motor moved forward and pinched employee's left index and hart fingers, causing an open wounds on both. It needs stitches.

An employee walked around the front of EE's mower to take a tool to get the trash at the other side. In order to prevent trip with the mower part, and not hit a road sign, the employee lower self to cross between then. EE did not being able to calculate the distance, and when EE stand hit the lower right corner of the sign, with EE's left earlobe.

An employee was cleaning the 2nd compartment of a ball mill, when it began to turn. The employee turned, and slipped and fell, while getting out of the mill.

Employee was driving a pin out of the cooler moving grate with an impact socket when hammer struck an adjacent piece of metal and glanced off and struck left hand

Employee was inspecting a conveyor and stepped on uneven ground and felt knee twist

Installing an air cannon when the safety cable pulled out of the clevis and the air cannon tank dropped hitting employee's right hand, cutting the palm and finger.

Employee was removing the door of a baghouse compartment; states that while on knees removing the hold downs nuts an keepers, injured back

Employee lost footing while unloading tires from a box trailer. EE caught self with right hand injuring the palm and thumb.

Employee was walking on un-level ground and sprained right knee.

Employee was climbing down from front end loader and on the last step of the ladder EE heard EE's knee pop.

Lifting water pump in place, pump not secured properly on forklift. Operator of forklift stopped and pump rolled off pallet/forks striking employee on left shin.

Working gypsum hopper. Reported of sore back. Sent to clinic. Employee given muscle to take at bedtime. Came back to work placed on light duty.

Angle iron was handed up to another employee, angle iron slipped out of one's hand striking right wrist of injured employee

Sprained right ankle when working. Did not show up for work or report incident. Called employee at home twice and got employee out of bed. Sent employee to clinic for evaluation.

Employee reported to safety department on May 2, 2016 at 0830: Left hand swollen. X-ray showed fracture of 5th metacarpal. Employee did not lose time from work.

Maintenance Tech was cleaning out all the built up material inside the spillage conveyor when a rock got dislodged, fell and hit ee below on the top left shoulder.

Employee was trying to put a cable onto back of loader, lifted up a pin to hook cable and dropped pin on first finger of left hand.

Employee just started work on finish mill first compartment partition, when a steel ball dislodged from above striking employee on the head and employee lost consciousness. Two fellow maintenance techs removed employee from the mill. Employee was taken to the hospital for evaluation. Employee returned back to work the next day.

Pallet broke with metal on it. EE got another pallet & placed metal back on pallet. EE called the next day said ee pulled something & ee was at the clinic. Incident was not reported the day of the injury. EE said it happened 2 weeks prior. We questioned the validity, investigated the incident & legally. Took several weeks. Thus the reason for the delay in reporting.

The constant rain around the state made the plant very slippery at the time of the incident. Employee walking across yard slipped on wet ground and hurt his ankle.

Employee slipped on wet material causing him to fall on his back.

QC TECH GETTING SAMPLE FROM PORT THAT WAS COATED OVER WITH MATERIAL. HE THEN PUSHED A ROD THROUGH THE HARD MATERIAL CAUSING HIS HAND TO SLIP CAUSING A LACERATION TO HIS RING FINGER.

employee walking through grass tripped over shovel.

Employee moving a 55 gallon drum strained his back.

employee making a lift from an awkward position

process attendant was using an air lance in a feed chute when the lance was stuck by some material pushing the lance backward toward the person

Employee stepped on uneven ground and rolled his ankle.

Working on bag house of blend silo.

Employee walking up stairs stumbled and smacked his knee on metal grating.

Employee walking across yard tripped on his on feet and twisted his knee.

Working with jackhammer to clean out pump when tip of jackhammer jammed causing hand to be pinched then causing a laceration to palm of hand.

Employee was lifting a piece of steel with a partner and strained lower back.

Employee was running away from snake and fell down causing him to get injured.

employee missed step and caught himself before hitting ground causing pain to groin area.

Employee just finished cleaning feed shelf at that point he removed his hot hood and went to put safety glasses on when some material was blown in his face.

Employee slipped off of excavator when exiting the machine.

Employee was trying to get a gate to move and was tapping it with a hammer and struck the top of his rt index finger.

Employee was clearing a clog on the cement dust collector buy banging it with a hammer and striking a his finger.

employee was carrying a piece of angle iron on a dirt surface when he rolled his ankle on a rock.

employee cleaning up spillage of sand pile

Employee was tightening bolts using a 2 7/8" wrench. The wrench slipped off of the bolt striking the employee above the left temple. Employee had a laceration that was about one inch long.

The employee was pulling an air slide back to gain access between the flanges. Employee was pulling old silicone out before adding new silicone. The chain that was being used to hold the flange slipped, causing the flange to come together on his left index finger.

Employee was wearing an arc flash protection suit, he was racking out a 12470V breaker to be locked out. After the employee racked out the breaker he removed his glove to open the door to put a lock in place. At that time employee claims that he was zapped by something.

Employee was squatting down working on a motor, his leg fell asleep. When he tried to stand up his right ankle rolled and he felt a pop.