Search the record

The injured employee was pulling a hose off of a water truck. The hose coupling hit him in the mouth as he pulled it off of the truck. The coupling split his lip, which required stitches.

The employee reported to his supervisor that he was feeling ill. He was transported off-site for evaluation. Later that day he was diagnosed as having heart attack.

While dismounting a piece of equipment an employee twisted his ankle. He was released to restricted duty.

A mechanic grabbed a structural support beam while climbing into the center section of the machine. In doing so, he dislocated his right shoulder. He was not released to return to work making this a lost time incident.

A contractor employee tripped while engaged in rail road track repair. The employee was working at ground level when he fell. He was diagnosed with a hip fracture.

While dismounting a dozer an employee slipped and hit his safety glasses on a handrail. The safety glasses caused two lacerations on his face which required stitches, making this incident reportable.

While installing a ripper tooth an employee struck the keeper pin with a 2 lb hammer. The strike was off center and the hammer glanced off the pin and hit his left thumb. The result was a laceration which required six stitches, making this incident reportable.

While loading a haul truck, a piece of coal fell off the bucket of a front end loader. The coal bounced off of the hand rail and broke the haul truck operator's side window. The operator received a contusion to his left shoulder. The ER physician did not allow him to return to work making this incident reportable.

The employee was attempting to stand from a seated position and dislocated his left shoulder. There was not trauma incident involved, the employee states that he has a history of shoulder problems.

Employee was dismounting a utility truck, missed the last step and fell to the ground. He did not return to work, making this accident reportable.

The employee was pulling on a wrench to loosen a bolt and felt a pop in his right shoulder. He received a light duty release making this incident reportable.

While attempting to repair to a braided hose mechanics left ungloved hand slipped causing left pinky finger to catch on exposed wire braid lacerating left pinky finger. 4 stitches administered as a result.

Employee was taking tension off of the 3 3/4 reeving cable where a shackle had become wedged between the sheave and housing. Employee was using a 1/2" chain and 3 ton come-a-long to pull the tension out of the reeving cable when the chain slipped and struck him on the right hand.

Employee kicking in drill holes reported twisting knee. Off site doctor conducted exam, no injury but follow up testing scheduled. Follow up results of exam on July 3, 2012 showed a tear in employees right knee. Unknown at time of report if any further action to be taken.

The employee was moving a rolling ladder platform on the shop floor when the employee felt a pain in right arm/shoulder. Employee finished shift and worked next shift before reporting injury the morning of 4/26/2012. Initial medical exam restricted work duties until follow-up doctor exam is scheduled. Determination of work status unavailable at time of report.

Employee used a folding pocket knife to cut a plastic cable tie. The knife closed on employee's right thumb cutting the thumb. Four (4) stitches were required to close the wound.

Injured was climbing onto left side of D9T dozer. When he reached the landing to the cab and began to open the cab door he slipped. He turned his body and slipped to the ground landing on his feet and buttocks. Strained rt shoulder, lower back and rt hip. Possible subluxation of rt hip.

Victim was driving the LT8000 fuel/lube truck unit #LT01 west on the BB access rd to service CAT D9R dozer unit #DZ04. Victim blacked out a few seconds before reaching the dozer. LT01 impacted the right side of the dozer throwing victim against shoulder strap, seatbelt and steering wheel of LT01. Victim never applied service brakes.

Victim was standing on the right track of the CAT D9R Dozer unit #DZ04 when the dozer was hit on the right side by the front end of the fuel/lube truck unit LT01. The impact of the collision knocked the victim off his feet and down onto the track. Victim was waiting on the mechanic driving LT01 to come and fuel and service the dozer.

Heart attack.

EMPLOYEE WAS HELPING ANOTHER EE LIFT A PIECE OF STEEL PIPE AND PULLED A MUSCLE IN THE LOWER BACK. RETURNED TO WORK THE FOLLOWING SHIFT, BUT WAS UNABLE TO WORK THE NEXT TWO DAYS.

EMPLOYEE WAS WALKING ACROSS THE PARKING LOT TO HIS VEHICLE AT END OF SHIFT. SLIPPED ON SNOW/ICE AND FELL, LANDING ON LEFT ARM & SHOULDER. IT HAD SNOWED ABOUT 8" DURING THE SHIFT, BUT PARKING L OT HAD BEEN PLOWED OUT, WAS STILL SNOWING AT THETIME OF THE ACCIDENT.

STEPPED OFF OF THE RUNNING BOARD OF THE FUEL TRUCK ONTO FROZEN, UNEVEN GROUND WITH HIS RIGHT FOOT. SLIPPED, STUMBLED AND TWISTED HIS RT. KNEEEE DID NOT LOOSE TIME. BECAME REPORTABLE ON FEB. 4TH, 2002. (NOT AS TOUGH AS HE THOUGHT.)

EE WAS WORKING ON REPAIRS TO THE STEERING OF THE330M TRUCK. HE HAD TIED THE END OF A HYDRAULIC HOSE OUT OF THE WAY SO THAT HE COULD REMOVE A STEERING CYLINDER. WHEN THE PIN HOLDING THE CYLINDE R IN PLACE WAS REMOVED, IT APPARENTLY DISLODGED THE END OF THE HOSE, WHICH STRUCK HIM.

EE WAS CLIMBING DOWN THE ACCESS LADDER OF THE KOMATSU 330M TRUCK, UNIT NO. HT-03. HIS FOOT SLIPPED ON A STEP AND HE CAUGHT HIMSELF WITH HIS LEFT ARM TO PREVENT FALLING OT THE SHOP FLOOR.

EMPLOYEE WAS OPERATING THE CAT D9R DOZER UNIT DZ-03 RIPPING COAL. HE WAS BACKING OVER A 2 FT CHUNK OF COAL. AS THE DOZER BACKED OVER THE COAL CHUNK, THE CHUNK BROKE CAUSING THE DOZER TO BANG DOWN ON THE PIT FLOOR. EMPLOYEE WAS LOOKING OVER RIGHT SHOULDER AS HE TOOK THE JOLT. SEVERE PAIN AND NUMBNESS IN LEFT LEG.