Search the record

EMPLOYEE WAS CHANGING THE SCREENS ON A MACHINE WHEN THE SCREEN FELL AND STRUCK HIM ON THE FOOT.

EMPLOYEE WAS WORKING AROUND A CRUSHING PLANT WHEN HE BUMPED HIS ELBOW ON FRAME OF THE PLANT.

EE STATED THAT THE MOTION OF THE FRONT END LOADER DURING OPERATIONS HAD STRAINED HIS BACK.

EMPLOYEE WAS PREPARING FOR WORK WHEN HE SPRAINED HIS BACK.

EMPLOYEE WAS PREPARING THE CRUSHING PLANT FOR MOVING WHEN HE SLIPPED AND STRUCK A PIECE OF METAL CAUSING A CUT ON HIS ARM.

EMPLOYEE WAS STARTING SOME EQUIPMENT WHEN HE SLIPPED ON ICE-COVERED BY WATER & FELL.

EMPLOYEE WA S PUHING A WHEELBARROW WHEN THE LOAD SHIFTED CAUSING EMPLOYEE TO PUT ALL HIS WEIGHT ON HIS LEFT LEG

EMPLOYEE WAS CUTTING STEEL WITH A CUTTING TORCH,WHEN A PIECE OF HOT SLAG HIT HIM IN THE LEFT EYE.

EMPLOYEE WAS USING A HAND SHOVEL, SHOVELING AROUND THE CRUSHING PLANT.

EMPLOYEE WAS PUTTING OIL IN A LOADER WHEN HIS FOOT SLIPPED-TWISTIG HIS BACK.

EMPLOYEE WAS HELPING TO CLEAN ROCK OUT OF A CRUSHING PLANT,WHEN HE THREW A ROCK AND STRUCK HIS HAND ON A PIECE OF IRON.THE EMPLOYEE DID NOT NOTIFY ANYONE OF THIS ACCIDENT UNTIL 12-01-92.

EMPLOYEE WAS CLEANING THE TAILGATE ARES OF HIS TRUCK WHEN THE TAILGATE CLOSED ON HIS FINGER.

EMPLOYEE WAS CHECKING OIL IN THE LOADER WHEN HE SLIPPED AND FELL TO THE GROUND.

THE EMPLOYEE WAS HELPING TO REPAIR THE TIRE CLEAN OUT BAR ON A EUCLID QUARRY TRUCK.AFTER CUTTING PART WAY THROUGHT THE BAR,THE HOIST WAS RAISED TO RELEASE THE BAR.AT THIS TIME THE BAR CAME LOO SE AND STRUCK THE EMPLOYEE.

EMPLOYEE REACHED FOR A SHUT OFF SWITCH AND STRAINED HIS BACK.

EE WAS WELDING ON A PIECE OF EQUIPMENT WHEN WELDING SLAG GOT IN HIS EYE.

EMPLOYEE SPRAINED HIS THUMB WHEN HE WAS REMOVING A STONE FROM AN APROM FEEDER.

EMPLOYEE WAS HANDLING A PIECE OF IRON WHILE IT WAS IN A FRONT END LOADER BUCKET. THE IRON FELL OUT OF THE BUCKE TAND STRUCK HIS HAND AS IT FELL TO THE GROUND.

EMPLOYEE WAS HELPING LIFT A PIECE OF STEEL WHEN HE STRAINED HIS BACK.

EMPLOYEE WAS LIFTING IRON, WHEN HE STRAINED HIS BACK.

EMPL REPAIRING ROCK DRILL HAMMER FOR JOY AIR TRACK DRILL WHEN PART HE WAS WORKING ON SLIPPED AND PINCHED FINGER.

EMPL WAS OPERATING MICHIGAN 125B FRONT END LOADER WHEN HE MADE SUDDEN STOP INJURED LOWER BACK.

EMPL CHANGING SPRING ON TANDEM DUMP TRUCK WHEN SPRING SLIPPED HITTING EMPL IN KNEE,CAUSING KNEE TO SUFFER SPRAIN.DIDNT REQUIRE MEDICAL ATTENTION UNTIL9-25-89.

HE WAS CLEANING THE RIP-RAP SCREEN WHEN HE JUMPED TO THE GROUND SUDDENLY TWISTING HIS KNEE.

THE EMPLOYEE WAS CLIMBING A LADDER ON THE CRUSHING PLANT WHEN HE SLIPPED AND STRAINED HIS KNEE.

EMPLOYEE WAS HOLDING A PIECE OF STEEL IN HIS HAND WHILE USING A DRILL PRESS TO DRILL A HOLE IN THE PIECE, WHEN IT SPUN AND CUT HIS FINGER

OUR EMPLOYEE WAS USING A HAND SHOVEL AT THE PLANT SITE WHEN HE STRAINED HIS BACK.

EMPLOYEE WAS GRINDING WITH A HAND GRINDER WHEN APICE OF GRINDING SLAG GOT IN HIS EYE.

EMPLOYEE WAS WORKING IN THE SHOP WHEN HE PUT HIS HAND ON A PIECE OF SHARP METAL AND PUNCTURED THE SKIN.

EMPLOYEE WAS BENT OVER WELDING ON A PART FROM THE CRUSHING PLANT WHEN HE STRAINED HIS BACK

THE EMPLOYEE WAS WORKING WITH SOME IRON WHEN A PIECE FELL & STRUTK HIS KNEE

THE EMPLOYEE WAS USING A CUTTING TORCH WHEN A PIECE OF CUTTING SLAG GOT IN HIS EAR.

EMPLOYEE WAS US3NG A WRENCH, DOING REPAIR ON A CRUSHING PLANT, WHEN HE STRAINED A MUSCLE HIS LEFT SIDE.

EMPLOYEE WAS HE5PING TO REPLACE THE JAW ON A CRUSHING PLANT WHEN THE PIECE SLIPPED AND FELL AGAINST HIS WRIST AND FOREARM CAUSING A MUSCLE BRUISE.

EMP STRAINED HI8 BACK WHILE OPERATING A HAND HELD DRILL, DRILLING OUT A STUD BOLT

EMPLOYEE WAS LI0TING A PIECE OF STEEL WHEN HE STRAINED HIS BACK

EE WAS WORKING 5ROUND THE AGGREGATE PLANT WHEN HE STRAINED HIS BACK.

OUR EMPLOYEE WHO IS A TRUCK DRIVER WAS ON THE LOAD IN THE TRUCK SHIFTING RIP RAP STONES HE GOT HIS FINGER PINCHED BETWEEN TWO OF THESE STONES CAUSING HIS LITTLE FINGER ON HIS LEFT HAND TO GET SMASHED

EMP WAS OPERATING POWER SHOVEL WHEN A STONE FELL FROM THE PILE GLANCED OFF THE CAB WENT THROUGH AN OPEN WINDOW AND STRUCK THE OPERATOR IN THE FACE

OPERATOR WAS INJURED AS OF THE ABOVE DATE. HE WAS ABLE TO RETURN TO FULL CAPACITY EMPLOYMENT AFTER 262 LOST WORK DAYS. AFTER SEVEN WORK WEEKS IT WAS DETERMINED THAT HE NEEDED SURGERY FOR THIS PREEXISTING CONDITION. HIS LAST DAY OF WORK FOR THIS PERIOD WAS MAY 30 1985.

EMPLOYEE SLIPPED OFF TRACKS ON THE BACKHOE AND HIT HIS RT SIDE AND BACK ON THE PADS OF THE TRACK THE EMPLOYEE BRUISED RT SIDE AND CRACKED TWO RIBS

EMPL HELPING SET A CONVEYOR IN PLACE WHEN HE STRAINED HIS BACK.

EMPLOYEE WAS LIFTING A TRUCK TRANSMISSION AT OUR SHOP WHEN HE STRAINED HIS BACK.

EMPLOYEE WAS WELDING WHEN HE STRAINDED HIS BACK.

OPERATOR WAS HANDLING A DRILL STEEL WHEN IT FELL AND STRUCK HIS LEFT LEG

EMPLOYEE WAS REPAIRING A LOADER AS HE BENT OVER TO PICK UP A PART HE STRAINED HIS BACK

OPERATER WAS MOVING AIR TRAC, WHEN HIS FOOT SLIPPED ON EARTHEN BANK. WHEN HE FELL TO THE GROUND HIS HAND SLIPPED FROM THE CONTROL LEVER AND THE LEFT TRACK WENT INTO REVERSE AND CLIMBED ONTO H IS LEG. HE REACHED UP AND THREW THE TRACK INTO FORWARD GEAR AND IT MOVED OFF HIS LEG THE MACHINE STOPPED AND HE WAS ASSISTED BHY THE BLASTER FROM DOLE EXPLOSIVES

EMPLOYEE WAS GETTING INTO A DUMP TRUCK WHEN HE SLIPPED AND STRUCK THE SIDE OF THE TRUCK WITH HISELBOW, WRIST AND FOREARM.

EMPLOYEE WAS USING A CUTTING TORCH WHEN HE GOT A PIECE OF STEEL IN HIS EYE.

THE LOADER OPERATOR ASKED TAYLOR TO HELP FIND A AIRLEAK ON HIS LOADER. TAYLOR TOLD HIM TO START THE LOADER, BUILD UP AIR PRESSURE AND MOVE THE LOADER TO THE NORTH SIDE OF FIELD SHOP. THE OPERA TOR STARTED HIS MACHINE, BUILT AIR PRESSURE AND STARTED TO MOVE. I,NAME APPARENTLY FOLLOWEDTHE OPERATOR TO THE MACHINE AND AT THE MOVEMENT OF THE MACHINE HAD CLIMBED ON THE REAR PLATFORM OF T