13
total records
Showing all 13
March 13, 2012
OR · Metal/Non-Metal
bulldozer operator, universal operator, heavy equipment operator, operating engineer
HANDLING OF MATERIALS
Canby Sand & Gravel Co. · Caught in, under or between a moving and a stationary object
Unbolting chute while sliding it into place it slipped pinning hand between chute and hoper below. Put bandage on hand & went back to work. EE called me Sunday 3/25/12 to tell me he was going to have his hand x-rayed. I had no notification he was having problems till Sunday.
July 7, 2009
OR · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
HANDLING OF MATERIALS
Canby Sand & Gravel Co. · Struck against stationary object
He was working at the pit line area, flinging 2x4 wood boards out of the way. A splinter from one of the boards entered the underside skin of his left hand middle finger. He removed splinter right away on 7/7/09, but on 7/16/09 it looked infected so he went to doctor on 7/16/09, after work. It was cleaned & antibiotic prescribed.
March 6, 2008
OR · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
OTHER
Canby Sand & Gravel Co. · Struck by flying object
Wind blowing - cutting pipe with saw. Wind blew a sliver into right eye. Doctor dug it out.
January 4, 2008
OR · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
POWERED HAULAGE
Canby Sand & Gravel Co. · Caught in, under or between running or meshing objects
Worker removed guarding attempting to clean tail roll with shovel.
September 14, 2007
OR · Metal/Non-Metal
beltman, conveyor man, conveyor belt worker, mobile bridge carrierman, feeder operator, conveyor rider
SLIP OR FALL OF PERSON
The conveyor that the employee was on was wet. When he stepped down to get to the walkway his foot slipped on railing causing him to loose balance, falling to the walk about 3 feet from belt.
October 19, 2006
OR · Metal/Non-Metal
warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator
SLIP OR FALL OF PERSON
Canby Sand & Gravel Co. · Over-exertion (Not Elsewhere Classified)
Climbing down of feed belt #16 at tailend, twist lower back and strained lower back. belt was damp but not a factor. just stepped or twisted wrong way.
Canby Sand & Gravel Co. · Struck against stationary object
Employee was clearing brush. He rammed a cottonwood ple through window of track excavator. While he was cleaning the glass out of hinges on excavator pulling rubber that broke free sliced elbow (right arm) on broken glass windshield. Cut was 2 1/2 inches and required 13 stitches at hospital.
March 10, 2005
OR · Metal/Non-Metal
haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver
POWERED HAULAGE
Parker Northwest Paving Co Inc · Caught in, under or between a moving and a stationary object
VICTIM WAS RAN OVER BY TRUCK AFTER MANUALLY RELEASING WHEEL BRAKES.
January 26, 2004
OR · Metal/Non-Metal
NO VALUE FOUND
EE STEPPED DOWN FROM LOADER, FELT PAIN IN HIS BACK, LATER FELT NUMBNESS IN GROIN AREA. WENT TO EMERGENCY ROOM AT HOSPITAL AFTER COMPLETING WORK SHIFT. DID NOT MISS ANY WORK SHIFTS.
September 5, 2002
OR · Metal/Non-Metal
front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator
SLIP OR FALL OF PERSON
Parker Northwest Paving Co Inc · Fall to the walkway or working surface
EMPLOYEE WAS WALKING DOWN HILL FROM FEEDER TO JAW AND CAUGHT EITHER HEEL OR TOE OF LEFT BOOT ANDFELL ON HIS LEFT SIDE. HE LANDED 5 TO 7 FEET FROM WHERE HE TRIPPED. HE STRAINED AND BRUISED HIS NECK AND BACK.
Canby Sand & Gravel Co. · Over-exertion in pulling or pushing objects
STRAINED RING FINGER OF LEFT HAND WHILE PULLING CONVEYOR BELT AROUND TAIL PULLY
May 15, 2000
OR · Metal/Non-Metal
maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech
MACHINERY
Parker Northwest Paving Co Inc · Caught in, under or between a moving and a stationary object
CHANING BOTTOM TRACK ROLLS ON D9-2 ON D9 CATERPILLR. BRACE THAT WAS HOLDING TRACK FRAME SUSPENED BROKE, CAUSING TRACK FRAME TO DROP, PINNING RIGHT HAND UNDERNEATH AIR WRENCH. AND SMASHING HA ND.
March 1, 2000
OR · Metal/Non-Metal
warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator
HANDLING OF MATERIALS
Parker Northwest Paving Co Inc · Over-exertion (Not Elsewhere Classified)
EE REPORTED HE WAS CLEANING UNDER JAW CRUSHER CONVEYOR WITH HAND SHOVEL. TWISTED WRONG & FELT SHARP PAIN IN GROIN AREA. EE DID NOT REPORT INCIDENT TO SUPERVISOR UNTIL MAY 9, 2000 WHEN EE WENT TO THE DOCTOR. SEE ATTACHED.
Showing all 13