Search the record

EMPLOYEE WAS ATTEMPTING TO HOOK UP PORTABLE WELDER TO WELDING TRUCK AND THE LATCH DID NOT SET. ANOTHER EMPLOYEE PUSHED THE BACK OF THE WELDER DOWN AND THE TORGUE CAME UP HAD PUSHED THE HAND A GAINST THE BOTTOM OF THE TRUCK.

EE CLAIMS INJURY WHEN A RET ROLLER HE WAS PUTTING ON #4 CONVEYOR STUCK HIS LEFT ELBOW. MGT WAS MADE AWARE OF THE INCIDENT ON 6/14/99 EE REFUSED MEDICAL ATTENTION 6/16/99 EE WAS WORKING WITHOUT RESTRICTION UNTIL 8/23/99 WHEN HE WAS PLACED ON LIGHT DUTY BY A SPECIALIST & WAS RX PHYSICAL THERAPY

EE OPERATING A 35 TON HAUL TRUCK WITH BED RAISED. STRUCK A CONVEYOR STRUCTURE AND SUSTAINED A CONCUSSION AND CONTUSION OF THE LEFT KNEE.

EE INFORMED SUPERVISOR OF PAIN IN CHEST SOMETIME AFTER THE EVENT. EE WAS TAKING WIFE'S PAIN MEDICATION SO EMPLOYER SENT EE TO DR. FOR CHECKUP. DR. STATED NO HEAVY LIFTED FOR 1 WEEK FOR PULLED CHEST MUSCLE.

EE WORKING ON GROUND LEVEL AT STATION #4 WHEN HIS FEET BECAME STUCK IN MUD AND HE FELL ON HIS LEFT ARM SPRAINING HIS LEFT WRIST/FOREARM.

EMPLOYEE AHD COMPLETED FUELING HIS TRUCK AND BENT OVER TO REMOVE THE WHEEL CHOCKS AND EXPERIENCED SEVERE PAIN IN THE BACK.

EE PINNED HIS LEFT ARM AGAINST THE CONTROLS WHEN DRILL STEEL WAS CROSS THREADED. OPERATOR ERROR WHEN CONTROLS WERE NOT PROPERLY OPERATED CAUSING STEEL TO SPRING OUT STRIKING OPERATOR WHILE IN ROTATION.

EMPLOYEE WAS POSITIONING A GUARD ON THE TAIL PULLEY OF NO. 6 CONVEYOR WHEN THE GUARD SLIPPED STRIKING THE EMPLOYEE'S RIGHT THUMB CAUSING THE LOSS OF THE NAIL AND A FRACTURE OF THE DISTAL END O F JOINT. STITCHES WERE REQUIRED TO CLOSE THE WOUND.

DRIVER FAILED TO LOCK DOWN PTO CAUSING BED TO RISE AND HIT CONVEYOR BELT.

USING A BOTTLE JACK TO SPREAD A GRAPPLER HOOK WHEN JACK SLIPPED AND PINCHED LEFT HAND NEAR THE THUMB.

EMPLOYEE WAS DIGGING BOULDERS OUT OF A RAMP SHOT. A BOULDER FELL STRIKING THE BASKET OT THE LOADER WHICH TWISTED IT AND SLAMMED OPERATOR AROUND IN SEAT. OPERATOR HIT RIGHT HIP AND RIGHT SHOULD ER.

EE WAS ASSISTING FOREMAN TO LIFT A FOLDING TABLE WHEN HE FELT A PULL IN HIS RIGHT SHOULDER. HE CONTINUED TO WORK, A REPORT WAS FILED. ON 9-18-98 EE INFORMED SAFETY ENGINEER HE HAD TO HAVE SURG ERY. EE WAS OPERATING ON 10-19-98 FOR ROTATOR CUFF REPAIR. HE WORKED HIS REGULAR JOB UNTIL THAT TIME.

TRUCK DRIVER FELL FROM LADDER ON TRUCK BOX WHILE FIXING SPRING ON TARP COVER. HE FELL TO THE GROUND AND STRUCK THE BACK OF HIS NECK. TRUCK DRIVER DELIVERED HIS LOAD AND RETURNED TO MINE PROPER TY AND REPORTED ACCIDENT.

EE WAS GRINDING SOME METAL & THE GRINDER CAME OFF THE METAL & CUT MINERS LEFT KNEE CAP.

MIDDLE FINGER OF LEFT HAND STRUCK BY ROCK WHEN HAND CLEARING A JAMMED CONE CRUSHER.

EE WAS STUNG ON THE RIGHT ARM AND RIGHT LEG BY A BEE. EE HAS AN ALLEGRIC REACTION TO BEE STINGS.

A 20 LB BOLT THAT WAS BEING CLEANED, ROLLED OFF A TABLE, STRIKING EMPLOYEE ON FOOT ABOVE THE STEEL TOE PORTION OF HIS SAFEY SHOE.

EE ADJUSTING CHAIN ON SPROCKET OF AIR TRACK DRILL. CHAIN MOVED CATCHING GLOVED HAND IN PINCH POINT.

EMPLOYEE WAS HANDLING SCREEN AND DEVELOPED A HERNIA.

REMOVING FILTER ON 988B AND STRAINED BACK.

CUTTING BRUSH AT MAIN ENTRANCE WITH GAS POWER BRUSH CUTTER, SLIPPED ON ROCK AND TWISTED LEFT KNEE.

VICTIM TOGGED A BEAM WITH A SLING LIFT WAS A BLIND LIFT WHERE BY CRANE OPERATOR WAS FOLLOWING THE TOGGERS SIGNALS BEGAN HOISTING UP WHEN SLING SLIPPED OUT WHICH ALLOWED THE BEAM TO STRIKE THE EMPLOYEE IN THE HEAD

WHILE USING A SLEDGE HAMMER AND BRO TO REMOVE A STUCK BEAMING PAVE WAS HOLDING THE BO AT AND ANGLE AND A PIECE BROKE OFF IN WENT INTO HIS LEG.

ENGINE PAN HIT ON FRONT END LOADER. INJURED ATTEMPTED TO LOSOEN CAP AND HOT WATER BLEW OUT AND BURNED HIM.

EMPLOYEE STRUCK SIDE OF HEAD ON ROPS STRUCTURE OF WALDON LOADER WHEN IT HIT A ROCK. EMPLOYEE WAS WEARING SEAT BELT & HARDHAT.

EMPLOYEE JUMPED FROM STALLED HAULAGE TRUCK WHEN ENGINE DIED ON RAMP.

EE GOT FINGER CAUGHT BETWEEN STONE AND CRUSHER PLATE WHILE MANUALLY CLEARING A JAM.

EMPLOYEE WAS MANUALLY CLEARING A ROCK JAM IN A CHUTE WITH A BAR HIS FINGER WAS PINCHED BY THE BAR AGAINST THE FRAMEWORK

THE END OF CABLE (WIRE ROPE) CARRIED IN A LOADER CAB PROTRUDED FROM THE CAB AND WAS CAUGHT UNDER THE MACHINE WHEEL. THE COILED CABLE WAS PULLED UP TAUGHT AROUND THE EMPLOYEE'S LEG AND DOOT.

EMPLOYEE WAS STRIPPING INSULATION FROM AN ELECTRICAL WIRE AND CUT HIS THUMB IN THE PROCESS.

EMPLOYEE FELT BACK PAIN/STRAIN AS HE PULLED HIMSELF UP ITNO A HAULAGE TRUCK VIA THE LADDER AND HANDHOLDS.

EMPLOYEE WAS REMOVING A BEARING FROM A SHAFT AND PULLEY ASSEMBLY. THE BEARDING FELL AND MASHED THE EMPLOYEE'S FINGER TIP.

EE CAUGHT HAND BETWEEN CONVEYOR GUARD AND A SMALL CLEAN UP POWER LOADER THE LOADER HAS AN OPEN OPERATOR COMPARTMENT.

HAUL TRUCK HAD BEEN PARKED UNDER THE BIN WITH THE MOTOR TURNED OFF AS THE PLANT WAS RESTARTED I NAME STARTED TO LOAD THE TRUCK BEFORE SECURING IT AS THE LOAD CAME ON THE TRUCK IT STARTED TO RO LL I NAME WENT TO GET ON THE TRUCK & SLIPPED STRIKING HIS WRIST ON THE BIN SUPPORT BREADKING A BONE

CLIMBING UP LADDER SLIPPED OFF STEP FELL PULLED MUSCLE IN L SHOULDER

I NAME WAS MOVING A HAUL TRUCK AFTER STEAM CLEANING IT WHILE MOVING THE TRUCK HIS FOOT SLIPPED OFF THE CLUTCH ALLOWING THE SPRING LOADER PETAL TO COME UP & STRIKE HIM IN THE SHIN THE PEDAL CU T HIS LEFT SHIN CUT REQUIRED 4 STITCHES

WHILE HELPING REPAIR A CRUSHER.EMPLOYEE WAS REMOVING BOLT TO INSTALL LET DOWN DRIVE.UPON REMOVING FIRST BOLT A GEAR FELL WITH THE WRENCH STILL INTACT STRIKING HIM ON THE RIGHT KNEE AND SHIN.TH E SHAFT WAS BROKEN BEHIND THE GEAR LETTING IT FALL.HE RECEIVED A BRUISED RIGHT KNEE AND SHIN.

WHILE HELPING TO ADJUST A CRUSHER HE GOT HIS RIGHT INDEX FINGER CAUGHT BETWEEN THE HANDLE A WEDGE OF THE CRUSHER CAUSING HIS FINGER TO BE CUT MASHED REQUIRING SEVEN STITCHES.

HELPING MOVE? METAL PLATE AND PULLED LOWER BACK MUSCLE.STARTED MISSING TIME 1-16-91.

EE WAS HELPING REMOVE A ROCK FROM THE JAW CRUSHER WHEN THE BLOCK OF THE CHAIN FALL STRUCK HIM IN THE BACK OF THE HEAD BELOW HIS HARD HAT. THE HEAD A SMALL CUT THAT TOOK 4 STITCHES.

SLIPPED AND FELL ON WET FLOOR.

HE WS HELPING CLEAR SOME ROCK FROM A PLUGGED DISCHARGE CHUTE. IN THE PROCESS ONE ROCK FELL FROM THE CHUTE AND STRUCK HIMON THE HAND. BRUISING HIS RIGHT HAND ON THE BACK SIDE NEAR THE BASE OF THE THUMB.

EMPL WAS LOAIDNG SURGE ROCK WITH LOADER AS HE WENT INTO PILE BUCET STRUCK SOMETHING CAUSING EMPL TO BE THROWN FORWARD HURTING LOWER BACK. HE HAD SEATBELT ON AT TIME OF ACCIDENT.

I NAME WAS REMOVING A PIN FROM THE CABLE ANCHOR ON THE ROCK BREAKER HE WAS USING A BOLT TO DRIVE THE PIN OUT WHEN HE STRUCK THE PIN IT FLEW BACK INTO HIS FACE BREAKING SOME OF HIS TEETH

BENT OVER TO PICK UP DROP CORD AND HURT HIS BACK

I.NAME WAS HELPING CHANGE A PULLEY ON A CONVEYOR. AFTER RMOVING THE PULLEY THEY DECIDED T LET IT DROP TO THE GROUND. WHEN THEY LET GO IT HUNG THE HAND RAIL FRACTURING A METACARPAL.

WHILE WORKING TO MOVE BELT BUILT PORT SCAFFEL MOVE SCAFFEL GAVE WAY FELL 15' BROKE SM BONE IN LOWER LEFT LEG. CRACKED HIS SHOULDER HAD CUT OVER R EYE

EE WAS WELDING UP UNDER THE CATWALK OF 1 SCREEN DECK. HE HAD GRINDER ACCESS TO THIS AREA BY AN EXTENSION LADDER THE WELDING WAS DONE STANDING ON A PLATFORM. AS HE WAS LEAVING HIS FOOT SLIPPED ON THE LADDER AN HE FELL APPROX. 10 FT LANDING ON THE BACK HE BRUISED HIS BACK AND LEFT LEG.

I,NAME WAS HELPING TO LOAD OLD SCREEN CLOTH INTO THE BACK OF A PICKUP TO HAUL TO THE STEEL PILE. I,NAME STARTED COMLAINING OF A PAIN IN HIS HERNIA.

WHILE HELPING INSTALL NEW CONVEYOR AT PLANT EMPL CLIMBED DOWN STRUCTURE & HURT BACK.