Search the record

TOGGLE SLIPPED OFF OF TOGGLE SEAT WHILE CHECKING THE TOLERANCES. LACERATED INDEX FINGER ON LEFT HAND.

GLOVE GOT CAUGHT ON COUPLING. PINNED HAND TO CENTRALIZERS.

SHOVLEING UNDERNEATH TAIL PULLEY,S HOVEL KICKED BACK AND PINNED HAND AGAINST STRUCTURE.

DRILL GEAR ENGAGED IN WRONG POSITION CAUSING DRILL TO TO RUN IN REVEARSE CASUING LEG TO BE CAUGHT BETWEEN SEAT BRACKET & DRILL.

REMOVING SHOVEL FROM TAIL PULLEY, CONVEYOR BELT WRAPPED AROUND ARM, PULLING LIGAMENTS AND MUSCLES.

EMPLOYEE WAS CUTTING WIPER WITH RAZOR KNIFE AND WAS HOLDING IT WITH HIS RIGHT HAND (EMPLOYEE IS LEFT-HANDED); THE KNIFE SLIPPED AND CUT HIM ACROSS HIS RIGHT HAND.

EMPLOYEE WAS UNLOADING A SCREEN FROM A TRUCK LOADER BUCKET WAS RESTING ON A RAIL ABOVE THE SCREEN EMPLOYEE RESACHED UP TO THE TOP OF THE SCREEN & RAIL BROKE & LOADER BUCKET DROPPED ON TO THE SCREEN CATCHING HIS FINGER BETWEEN

EMPLOYEE WAS WA5KING DOWN STEPS STEPS WERE WET EMPLOYEE SLIPPED & TWISTED KNEE

WORKERS HAD REM2VED PART OF THE DECKING TO REPLACE IT AND I,NAME WALKED INTO THE HOLE AND BRUISED AND STRAINED HIS RIGHT LEG.

EMPLOYE DROVE A3TRUCK OFFA 75 FT. CLIFF-APPARENTLY ON PURPOSE-SEE ATTACHED POLICE REPORT.

EMPLOYEE WAS WE5DING ON BUCKET AND USING GRINDER WHEN HE LIFTED HIS WELING HOOD AND A PIECE OF WIRE BRUSH FLEW INTI HIS EYE;ALSO THE WELD POPPED CAUSING SLAG TO ENTER SAME EYE.

EMPLOYEE WAS GR9ASING TAIL PULLEY AND TURNED AROUND AND HIT KNEE ON LADDER.

HE WAS TRYING T2 R EMOVE SOME IRON BARS FROM THE SWING BEAM OF THE IMPACTOR WITH THE BACKHOE WHEN A PIECE OF METAL FLEW OFF AND HIT HIM IN THE NECK

CONTINUOUS PULL3NG ON STEERING WHEEL WITHOUT POWER STEERING & TURNING NECK IN OPPOSITE DIRECTION DISPLACEMENT OF CERVICAL DISC & RADICULAR NEURALGIA & COMPRESSION OF SPINAL NE RVE ROOT & SEGM9NTAL DYSFUNCTION.

EMPLOYEE WAS PU5LING A SCREEN OFF THE #2 SHAKER WHEN HE BECAME ANGRY WITH ANOTHER EMPLOYEE AND THREW THE SCREEN OFF THE SHAKER ONTO THE GROUND THEREBY APPARENTLY STRAINING HIS BACK

EMPLOYEE APPARE3TLY PASSED OUT AND FELL OVER GUARD RAIL

EMP WAS SHOVELI3G BUILDUP FROM UNDER THE PULLEY ON FIRST SCREEN WHEN HE GOT DUST IN HIS EYE WHICH APPARNETLY GOT UNDER HIS CONTACT LENS

EMPLOYEE WAS OP9RATING THE CRUSHER WHEN A ROCK FELL OFF THE SECOND SCREEN AND HIT EMPLOYEE ON RT ARM

HE WAS GRINDING3A PIECE OF STWL ON A LOADER WHN%*@%* WHEN A FRAGMENT OF STEEL FLEW UP INTO HIS RIGHT EYE. HE WAS WEARING GOGGLES AT THE TIME OF THE ACCIDENT.

EMPLOYEE WAS WA5KING UP STEPS TO OPERATOR SHACK WHEN HE SLIPPED AND FELL AND INJURED HIS RIGHT WRIST.

WHILE REPAIRING SCREEN COUNTER WEIGHT DROPPED.

WAS ON CONTROL TOWER PLANT WHEN ELECTRICAL BOX X/2 STARTER BUTTONS EXPLODED

EMPLOYEE WAS ATTEMPTING TO ASSIST THE DRIVE OF A TRUCK FROM KING BEARING COMPANY WITH THE UNLOADING OF A TROUGHING ROLLER. THE DRIVER WAS IN A HURRY AND WAS INPATIENT. HE PUSHED THE ROLLER TOW ARD I,NAME BEFORE I,NAME WAS READY, CAUSING I,NAME TO CATCH HIS THUMB BETWEEN THE ROLLER ANDTHE SIDE OF THE TRUCK, CAUSING SPRAIN, BRUISE AND LOCERATION TO RIGHT THUMB.

I,NAME ALONG WITH TWO OTHER EMPLOYEES, WAS STANDING ON TOP OF THE SAND LINE BELT WHILE LIFTING AN ELECTRIC MOTOR IN PLACE. WHILE DOING THE LIFTING, HE FELT A PULL IN HIS LEFT UPPER ARM.

EMPLOYEE WAS DRIVING THE SPARE BUNKER TRUCK. AS HE WAS GETTING OUT OF THE CAB OF THE TRUCK, HE MISSED THE STEP AND TO AVOID FALLING TO THE GROUND, HE HELD ON THE HANDRAILS.

WHILE WASHING THE TOP OF THE TRUCK SLIPPED AND TWISTED BACK.

EMPLOYEE WAS STANDING ON BACK OF WELDING TRUCK WITH ARMS EXTENDED OVERHEAD, TRYING TO ADJUST CATWALK ON 841 DRAGLINE SO THAT HE COULD WELD IT IN PLACE CAUSING LOWER BACK STRAIN.

WHILE DRILLING ROCK FELL FROM ABOE AND STRUCK HIM

WHEN EMPLOYEE WAS MOVING DRAG CABLE TO WELDING TRUCK HE STRAINED HIS LOWER BACK

WHILE BREAKING ROCK OUT OF JAW CRUSHER ANOTHER ROCK ROLLED AND HIT FOOT.

WHILE GETTING OUTOF TRUCK HAND SLIPPED IN BETWEEN CAB AND HANDRAIL.

EMPLOYEE WAS USING A WIRE BRUSH TO CLEAN A PIECE OF STEEL. A PIECE OF STEEL FLEW IN HIS RIGHT EYE

WHILE CHANGING DRILL STEEL, STEEL SLIPPED OUT OF ONE HAND TRAPPING THE OTHER HAND.

EMPLOYEE WAS WATERING HAUL ROAK WHEN STEERING BNBOUND UP. TARUCK WAS ON INCLINE AND HEADED FOR A CANYON. EMPLOYEE COULD NOT GET TRUCK STOPPED IN T IME AND JUMPED OUT TO AVOID RIDING OFF INTO C ANYON BELOW. TRUCK CAME TO S TOP ON BRIM.

EMPL LAYING ON CONVEYOR BELT UNDER CONE CRUSHER TIGHTENING HOSE CLAMP.PLANT OPERATOR TOLD TO TURN OFF ALL OTHER EQUIP.IN DOING SO HE PUSHED WRONG BUTTON AND STARTED CONVEOYR.

EMPLOYEE WAS HELPING TWO OTHER EMPLOYEES ROLL A LARGE CONVEYOR BELT. THE BELT WAS EXCEEDINGLY HEAVY, CAUSING MR. AVALOS TO STRAIN WITH THE ACTIVITY.

WHILE LIFTING TRANSMISSION PULLED GROIN MUSCLE.

EMP WAS OPERATING 814 DRAGLINE AND WAS HOLDING TRAVEL CLUTCH THE FORCE AND AKWARD POSITION REQUIRED TO OPERATE MACHINE CAUSED EMP TO PULL MUSCLE IN LOWER BACK

EMPLOYEE WAS PUNCHING HOLES IN A CONVEYOR BELT. THE GROUND THAT HE WAS WORKING ON WAS UNEVEN, CAUSING HIM TO TWIST HIS KNEE.