Search the record

HE WAS HOLDING A PIECE OF METAL FOR THE WELDER TO WELD. THE WELDING FLASH BURNED BOTH EYES.

SNOW HAD CAUSED A PATCH OF ICE. EMP SLIPPED ON ICE AND FELL ON LEFT WRIST.

HE WAS PUTTING ANTIFREEZE IN LOADER AND FELL 10' TO GROUND FROM BACK OF LOADER.

SLIPPED ON ICE.

HE WAS RAKING DUST FROM UNDER DRYER BURNER WITH AN IRON BAR. THE BAR SLIPPED & HIT HIS L. EYE, CUTTING HIS EYEBALL.

CLIMBING LOADER LADDER, SLIPPED & FELL AGAINST FUEL TANK ON LOADER - INJURED R ELBOW & SHOULDER.

CUTTING OUT A SCREEN BEARING- EYE INJURY.

JUMPED INTO RAILROAD CAR FROM TOP TO CLEAN CAR. ABOUT 4-5' JUMP.

MOVING SHEET OF METAL IN LOADER BUCKET METAL SLIPPED AND CAUGHT FINGER BETWEEN METAL AND LOADER BUCKET.

HE WAS TIGHTENING A BOLT WITH AN AIR WRENCH. MASHED MIDDLE FINGER ON LEFT HAND BETWEEN BOLT AND METAL ON DRYER.

EE PULLED HAUL TRUCK UP TO LOADER & SLIPPED ON TIRE TO TAKE TO LOADER OPR LOADER OPR STARTED BACKING UP WHILE EE WAS STANDING ON THE HE JUMPED TO GRUND LANDING ON HIS FEET BROKE BONE IN R HEEL DID NOT GO TO DOCTOR UNTIL 08-28-95 THOUGHT WASJUST A BRUISE

ANOTHER EMPLOYEE THREW A WELDING ROD FROM A TRUCK & HIT EE IN THE SHOULDER

HE WAS TYING EXHAUST WITH WIRE. WIRE GOT CAUGHT IN RADIATOR FAN AND JERKED WIRE AROUND THUMB AND FINGER. THUMB ON RT HAND WAS AMPUTATED BEHIND NAIL AND RING FINGER WAS FRACTURED.

HE WAS WORKIGN UNDER A LOADER, HIS FOOT SLIPPED AND PULLED SOMETHING ON RIGHT SIDE OF RIB CAGE.

WELDING ON HAMMER MILL-A PIECE OF WELDING SLAG GOT IN L EYE.

PUTTING BOLTS IN PC SEPARATOR--1-1/8" END WRENCH SLIPPED OFF BOLT & HIT L. EYELID.

EMPLOYEE WAS BEATING ON A BIN WITH A HAMMER, STANDING ON A CATWALK & LEANING OVER A HANDRAIL. THE METAL HANDRAIL BROKE AND HE FELL 3 FEET, HIT THE TOP OF THE SIDE OF THE TRUCK HE WAS LOADING, THEN ON TO THE GROUND ABOUT 10 FEET. HIS RIGHT SIDE OF HIS RIB CAGE WAS BRUISED, THE HAMMER OR PART OF THE HANDRAIL HIT HIS LEFT SIDE OF HIS HEAD.

FORKLIFT RAN INTO HIS LEG AFTER HE HAD GOTTEN OFF AND WAS IN FRONT OF IT. HE THOUGHT IT WAS OUT OF GEAR AND IT WASNT.

HE WAS BREAKING A 160 CHAIN LOOSE FROM THE DRYER IN THE DUST HOUSE. HE DREW BACK & WHEN IT CAME DOWN IT HIT A GEAR BOX AND HE HIT HIS LEFT FOREARM INSTEAD OF THE CHAIN.

EE WAS REPAIRING PALLET WITH A NAIL AIR GUN. THE AIR GROM THE GUN BLEW A PIECE OF METAL UPWARD & INTO HIS EYE.

FORK LIFT DRIVER BACKED INTO HIM, KNOCKING HIM DOWN WITH THE TIRE. HIS FOOT GOT CAUGHT BETWEEN THE TIRE AND THE FRAME OF FORKLIFT WHILE FORKLIFT WAS MOVING.

HE WAS TRYING TO CUT A HOLE IN A CONVEYOR BELT WITH A POCKET KNIFE. THE KNIFE SLIPPED AND CUT HIS RIGHT INDEX FINGER.

BAGGING DUST THIS WAS A GRADUAL INJURY THE LOUGER HE BAGGED THE MORE IT HURT UNTIL ON THE 17TH HE HAD TO QUIT HE DID NOT GO TO DR UNTIL THE 17TH WHEN HE TRIED TO PICK UP 50 LB BAG AND COULD NO T.

HE WAS CLIMBING DOWN THE RAIL CAR LADDER AND CAUGHT HIS LEFT THUMB IN THE LADDER. THUMB WAS BENT BACK AND HAD A FRACTURE.

PRYING WITH STEEL BAR ON SEPARATOR AIR ADJUSTMENT FINS,BAR SLIPPED JAMMED FINGER AGAINST METAL ON SIDE OF SEPARATOR.

EMPLOYEE WAS STANDING WITH HIS FOOT RESTING ON FORKLIFT FORK CUTTING A PIECE OF METAL. THE FORK SLIPPED FROM UNDER THE LOAD AND THE FORK JUMPED UP CAUSING THE FORK TO BRUISE AND TWIST HIS FOOT AND ANKLE.

CHANGING HAMMER IN HAMMERMILL CAUGHT FOOT BETWEEN HAMMERS & GRATE BAR

EMPL WAS USING 3/4 DRY RATCHET TO TIGHTEN COUPLING BALL MILL. JAGGED PIECE OF METAL WAS EXTENDED FROM AUGER ABOVE COUPLING & CUT KNUCKLE ON LEFT INDEX FINGER.

EE WAS WALKING ON A METAL WALKWAY WITH A GREASE. GUN IN HIS HAND WHEN THE WALKWAY BROKE AND HE FELL AGAINST A PIECE OF METAL WITH HIS RIGHT SIDE AND ONTO THE FLOOR 5 FT DOWN.

HE WAS BAGGING DUST GOT ON FORKLIFT WITH ANOTHER EMPLOYEE DRIVING.THEY BACKED UP AND CAUGHT LEFT FOOT AND ANKLE BETWEEN METAL POST AND METAL ON FORKLIFT.

I.NAME BAGGING ROCK DUST AND STARTING 10-31-88 HIS BACK WOULD HURT.11-3 IT WAS HURTING COULDNT CONTINUE HIS JOB WHICH IS TO LIFT 50 LB BAGS OF ROCK DUST,TURN AND STACK THEM ON PALLETS AT RATE OF 6 TONS? PER HR.

LOOSENING BOLTS ON EUCLID TRUCK FRAM USING SOCKET ,BREAKING BAR AND CHEATER BAR.HAND SLIPPED OFF CHEATER BAR CAUSING IT TO SPRING BACK AND HIT LEFT RIB CAGE.

EMPLOYEE WAS CLIMBING INTO LOADER CARRING THERMOS AND SLIPPED ON SECOND RUNG OF LADDER AND FELL TO GROUND, TWISTED RIGHT KNEE.

HE WAS CARRYING3IRON BAR TO REPAIR FROZEN BELT, SLIPPED ON SNOW & FELL ON RIGHT ELBOW. (EMPLOYEE WENT TO DOCTOR ON 1-11-88 FOR X-RAY) ON 1-26-88 HAD TO GO BACK TO DOCTOR FOR TREATMENT).

FELL ON CONCR E7E FLOOR & CRACKED RIGHT KNEE-CAP

HE WAS GETTING 2FF THE LOADER AND HIT RIGHT KNEE ON STEERING COLUMN.

HE WAS LIFTING 6AGGED MATERIAL WEIGHTING 50 LBS AND SPRAINED BACK

DRILLING HOLES 3N ROCK WITH AIR DRILL. THE AIR FORCED CUTTINGS FROM HOLE AND INJURED LEFT EYE.

HE WAS PUTTING 5 HYDRALIC CYCLINDER TOGETHER WHEN IT SLIPPED AND CUAGHT 2 FINGER BETWEEN THE CYCLINDER AND THE CHAIN. ONE FINGER WAS CUT ANDTOOK STITCHES, THE OTHER FINGER WAS ONLY BRUISED.

TURNING AND TWI8TING REQ FOR JOB OF BAGGING ROCK DUST CAUSED HIS KNEE TO BE SORE AND IN PAIN.-CONTINUATION OF REPORT DATED 4-1-86.

TRUNING AND TWI8TING REQUIRED FOR THE JOB OF BAGGING ROCK DUST CAUSED HIS KNEE TO BE SORE AND IN PAIN