Search the record

Injured was greasing bearing on #2 conveyor top catwalk when the board he was walking on broke.

Injured was chipping slag after welding on a haul truck box when a piece of slag flew up and struck his eye lid.

While removing a hydraulic hose on L-480 (#31), hose flipped out of clamps and the hose had a tag end that was sharp and struck injured in the face/nose.

While taking a production check, caring a bag of stone, injured slipped when walking down catwalk (#6 Boom) and landed on his posterior (rear end).

The injured employee was assisting in setting cables on the mill 7 ft crusher when the bulldozer operator was signaled to go "back". However, the operator thought he was signaled to go "forward", which tightened the cable, causing injured's hand to be pinched between the crusher and cable.

When reaching for oil can in back of pickup truck the injured felt strain to right side of ribs.

While in the ship garage changing a tire the injured was hooked on sharp steel.

The injured was die grinding stainless steel parts in the maintenance shop. After grinding he looked up and metal fleck' s that were on his safety glasses fell into his eye.

While jacking up (#40) 2003 Komatsu Haul Truck the injured employee stood up, hard hat flipped off, and walked into right front fender.

The injured employee was getting out of his work truck by the gas pumps when he slipped on ice, hurting his back.

The injured cut his knuckle of pointer finger on left hand while checking screens on Fine Tower, middle screen.

The injured employee was driving production haul truck #43 when he went off the side of the haul road.

Fixing a valve at the north end of the plant. Fell in a hole and broke two ribs and scraped elbow.

While operating #41 992 K Cat Wheel Loader loading production haul trucks, the injured employee was observed by one of the truck drivers as being in a stroke like condition.

While driving production haul truck #35, the injured employee attempted to move a rock approximately 30' X 30" from the haul road.

While welding cracks in the primary crusher main frame, the injured was doing a lot of twisting and turning and felt pain in his hip with increasing pain.

The injured EE was removing decorative rocks in front of the office. While putting the rocks in the bucket of the loader, he lost his grip on the rock and the rock smashed his left index finger.

Injury was putting Hydraulic Oil in #65 (1990 Kobelco K912 Excavator LC Mark II). When injured lifted a 5-Gal. can to pour into funnel he claims injuring his back.

While loading some junk tires, the injured EE twisted wrong and hurt his back.

While installing 20 FT. of 2" suction hose in pit pond, the injured was pushing hose and extended reach. Feet being in mud, twisted back.

The injured was half way back into the surge tunnel inspecting and cataloging rust trip cable supports to replace when he tripped and fell. Nothing obvious on the floor.

Injured fell about 5 Ft. from the ladder he was working from. He was at the 92" Screen Tower laying out holes to move a beam when the feet of the ladder slipped, and he fell to the ground landing on the left foot then rolled to the right landing on his hip/tail bone.

The injured was half way back into the surge tunnel inspecting and cataloging rust trip cable supports to replace when he tripped and fell. Nothing obvious on the floor.

The injured EE was grinding steel on the cutting table, about waist high, when a piece of steel came up from the grinding wheel and went up behind from the bottom of his safety glasses, lodging in his left eye.

Driving skid loader, parked and exited. Slipped and hit bucket of skid loader with left shoulder.

Using a spud bar to break up coal ring. The bar slipped and hit employee in head

Unplugging the head of the stone belt and strained back

The injured was removing a trougher at the tail end of the weigh belt with a pry bar, his hand slipped into guard.

The injured was removing a rock from the haul road when he felt pain in his groin.

Walking down the steps and stepped off onto ground and twisted ankle.

Injured advised doctor that he was lifting rock from the crusher, when he experienced a burning sensation in the groin area.

Ee was removing 6" PVC pipe sections from the top of boreholes that were stuck in the muck & used a pair of pliers to try & gain a better grip. The ee was standing directly over the pipe using both hands to apply pressure to the pliers pulling in an upward motion. The pliers came loose & the pipe came up hitting the ee in mouth & face & broke a tooth & gave him a concussion.

Injured was pulling out a drill tube with pliers when the pliers slipped off the tube striking the injured in the mouth and head.

The injured employee was removing rusted metal from back of #29 Mack truck using a 6" angle grinder and pliers when he cut his hand while reaching over the grinder with the pliers to remove the metal.

The injured was cleaning the desks at the office using an aerosal spray, when she experienced a sore throat, difficulty breathing and a pain in her lower chest.

While lowering fall protection on trailer, stepped on rib and fell and twisted ankle. (DCN:220073480020-Per MSHA inspector Jack Webb this was not a reportable accident. The employee did not have any lost time)

The injured was washing out a screen to be repaired when he lost his balance with the water hose and had to jump off the 2nd step of the ladder he was standing on. He landed with one foot in a 5-gallon waste oil bucket, twisting his hips and ankle.

Clearing rocks from hopper belt and caught his finger under or between some rock.

While exiting the 5 Foot Crusher after repairing liners, the injured hit his left elbow on a stantion (drain) pipe. Did not seek medical treatment until 4/21/2006.

The injured got a piece of metal in his right eye while operating a die grinder while repairing a shifting linkage.

THE INJURED EXPERIENCED SORENESS IN HIS BACK AFTER OPERATING THE PC400LC-7 KOMATSU AFTER DIGGING OUT LARGE ROCKS AND THE BUCKET SLIPPED OFF SEVERAL TIMES DROPPING, CAUSING JAR SENT TO THE CAB AND SEAT.

THE INJURED WAS USING A DIE GRINDER TO CUT A SOLENOID FREE FROM THE FRAME OF THE 1988 FORD MODEL CARGO 8000 FUEL TRUCK, APPLYING THE CHARGED GRINDER TO THE BOLTS OF THE MOUNTED SOLENOID, WHEN THE GRINDER "DUG IN" AND JUMPED, STRIKING THE BACK OF THE INJURED'S LEFT HAND BETWEEN THE THUMB AND INDEX FINGER RESULTING IN A 1 1/2 INCH LONG CUT.

THE INJURED BRACED HIMSELF BY HOLDING ON TO THE DOOR FRAME OF THE PC400LC-7 KOMATSU EXCAVATOR WHEN DESCENDING THE LADDER WHEN A GUST OF WIND BLEW THE DOOR SHUT PINCHING HIS RING FINGER OF LEFT HAND.

The injured came to the office on 6/21/05 and advised he was experiencing irritation in his left eye since approx. thursday june 16,2005 and not improving. injured was set up with an appointment to see eye dr,.

Fire in boat loading shuttle house.

The injured was hosing around tail end of 21 FT. feeder belt, when he accidentally "back" sprayed himself in the eyes.

Platform that employee was working on broke. Employee feel approximately 3 feet and sprained his ankle.

The injured experienced itching, mattering, redness and watering of this left eye after cleaning in the surge tunnel.

THE INJURED EE SMASHED HIS FINGER WHILE REMOVING A COMPRESSOR FILTER WHILE WORKING ON THE DRILL.

THE INJURED EMPLOYEE WAS PICKING UP ROCK OFF THE HAUL ROAD. WHEN HE THREW A ROCK BACK OVER HIS SHOULDER HE HEARD SOMETHING SNAP.