Search the record

April 16 2020 the employee had surgery on EE's wrist because EE had carpal tunnel.

A piece of rock fell and hit employee on the head. The hard hat cut employee above eye brow causing employee to get 5 stitches.

employee put a hand on the bolter and a piece of shale feel from the top and hit middle finger causing a small fracture.

Had carpal tunnel surgery on 02/11/2020.

Moving battery cell, pulled on it, got hernia.

Employee thought the roof bolt was in the chuck and when EE raised the boom the bolt popped out and the roof bolt plate cut EE's arm.

Had shoulder surgery on 12/11/2019.

Employee had carpal tunnel surgery on 12/17/2019.

taking out a belt scraper when it slipped out of their hand and broke a bone on the left middle finger.

Employee had Cubital Tunnel surgery on 10/17/2019.

Hanging wire and twisted knee. Torn ACL

Employee was pulling down pull through curtains when they heard their shoulder pop. Employee is having surgery today 10/17/2019. Employee never missed a day of work until the surgery date.

Standing on 3 foot ladder hanging curtain when a piece of the rib rolled out and hit ladder knocking EE off and EE landed on the ladder and pieces of coal.

Pulling a curtain out of the gob and received a hernia.

Pulling a belt flapper out from under the belt and felt a pain in the groin. Employee has a hernia.

Using a pry bar on DMU rails and hurt shoulder/bicep. EE had surgery on torn bicep on 5/30/2019. EE never missed a day work until surgery date.

Rock fell between the pins and hit employee.

Twisted ankle going through man door.

rock fell on back of foot

moving a bolter when the back end of the bolter went into a hole and hit EE's right foot fracturing EE's little toe

Throwing a pallet in a dumpster when it hit a foam canister in the dumpster squirting a liquid in employee's face and eye. Employee had to get a prescription for eye.

Smacked finger with roof bolt

Slipped on tram struck knee on tram.

Mantrip hit something causing it to go through the drain hole on the floor board fracturing employee's leg.

Employee had Carpal Tunnel Surgery on both wrists on 2/26/2019.

something blew into eye

Employee had carpal tunnel surgery on both wrists. Surgery is on 9/4/2018.

Repeated motion. Went and had surgery on elbow for carpal tunnel on 07/14/2020

Employee was using a pry bar to slide a pin pod over when the bar slipped pinching a finger between the pin pod and the pry bar. Employee received 5 sutures.

Miner was walking away from the miner while they were changing bits when a piece of the bit or hammer hit the employee walking away in the side of the head. The employee received 5 sutures.

Employee had Carpal Tunnel Surgery on 1/17/18.

Employee was straightening roof bolt plates when a piece of rock fell and smashed right ring finger. EE received 7 sutures and broke the bone at the end of finger

Employee had carpal tunnel surgery on wrist on 4/9/2019.

Employee was scaling the top when a piece of rock fell and hit ee in the head. EE received 15 staples.

Employee had Carpal Tunnel Surgery on wrist on 4/4/2019.

Stepped on a piece of coal and twisted ankle. The employee never missed a day of work until 11/02/2017. The ankle never really healed and now the doctor has put EE in a boot and told EE to stay off it for 2 weeks.

Truck driver dumping fly ash got dizzy fell into a pile of fly ash. Employee received burns to employee's eyes which employee had to get antibiotics for employee's eyes.

A piece of wood off of a wood plank was blown into employees left eye by the fan on a bolter. Employee went to eye doctor the next day and received medication in the eye.

Employee had Carpal Tunnel Surgery on both right and left wrist. Surgery was on 6/15/17.

Repairmen doing perm on scoop was removing pump motor lids. When ee went to lift and move cover ee tore bicep muscle in right arm

Fell on grating and caught self and tore left rotator cuff. Employee returned to work until surgery on March 2, 2017. Never missed work waited 2 weeks before going to the doctor. Returned back to work with no restrictions until surgery date.

Drill steel popped out of chuck and hit EE in the left thumb. EE had to get 8 sutures.

Steel pipe fell and broke finger.

Getting off a mantrip and pant leg got caught on the ride causing EE to fall. EE torn EE's left bicep when EE grabbed the mantrip to keep EE from falling.

EE was putting in the frame for equipment doors when the header of the door frame slid down pinching index finger between the header and the post.

Employee was pulling a drill steel out of EE's tray when the steel smashed EE's finger against the drill pod. EE received 4 sutures.

They were moving a feeder when it hit the rib. They stopped the feeder and had to move the cable and when they move the feeder again the rib rolled out and hit an employee in the left leg.

Hitting a connecting link for a conveyor chain when a piece of metal flew off and hit employee in the left arm. Employee received 1 suture.

Employee had Carpal Tunnel Surgery on both wrist on 01/02/2018.

Hit hand with hammer