Search the record

February 27, 2026, an employee and a coworker were cleaning tracks on excavator. While holding the hose of a sprayer as the coworker operated the sprayer, the employee slipped from the track surface and fell from the equipment. During the fall, the employee's right leg became caught between the excavator tracks, and the employee fell to the ground.

A haul truck operator was pulling away after being loaded when an excavator bucket contacted the truck tailgate. The excavator operator believed the truck bed might roll over and attempted to stop it with the bucket. The contact jolted the truck operator in the seat, causing lower back pain. The operator was transported to a clinic and diagnosed with a lower back strain.

Employee received a laceration to the head after falling.

Employee smashed EE's hand between flange on discharge suction pipe

They accidentally crushed their foot on the skid basket. got off by accident

EE was inside the office section of the warehouse when EE encountered a bee and was stung on the left side of the upper chest area. Stinger was removed, first aid sting ointment was applied, drew boundary around wound to monitor. After several minutes, there is a small amount of swelling, but employee appears to show no signs anaphylaxis.

Maintenance team were unloading a beam from telehandler forks and placing beam onto catwalk, Back was hurt in the Process.

Employee was working in the scrap yard. Employee was throwing rollers in the scrap yard when a bee landed on EE's back and stung EE.

Employee was cleaning EE's area after finishing a project. Employee was changing air bladders on a screener. Employee bent down to pick up the bladder, EE pulled on it. The bladder was caught on the grating, it released suddenly and the employee fell back against the handrail and struck the left side of EE's body.

Employee was using a cutting torch, cutting 4 inch square tubing when the flame of the cutting torch penetrated through employee's left welding glove.

Employee was helping change metal screens on a T190 McCloskey. Employee was trying to fit a U-bolt in place, to hold the screen in place. (Bottom deck Screen tensioner) The U-bolt plate slipped down smashing employee's finger between the screen plate and the U-bolt.

The bee had traveled into the employee's sleeve while outside, then the employee thought it was fly and tried swatting it out of the sleeve and ended up getting stung twice.

Employee was on their way to the dry plant. While driving; a bee flew into EE's shirt stinging EE in the armpit.

While connecting conveyor sections, section DF contacted section DE causing section to slide off the dunnage it was resting on. Employee's foot was pinned. The movement continued to slide across the steel toed portion and came to rest on employee's foot, causing injury. Employee was given first aid on site and transported to ER where employee was treated and released.

At 7:53pm on 4-26-23 employee was using Skid Steer #12068 cleaning a sand spill in silo 2. When the blade from the bucket of the skid steer came into contact with the seam from the scale causing the skid steer to stop abruptly thrusting employee forward. The act caused a discomfort in neck and shoulders.

Our employee (EE) was in boom lift going from conveyor 1702-1902. Lift operator's hand slipped off joystick, then oper grabbed it again roughly. The jerk in movement of lift caused our EE's head to thrust back & then forward quickly. Our EE felt a twinge in neck, but EE didn't think much about it. On 02/15/2023, the pain had become bad enough that our EE sought medical treatment.

Employee was going up the stairs on our dredge. It was cold and icy that day. As the employee was stepping up, employee slipped and fell landing on right hand. Doctor was notified. Several days later, the swelling did not go down. Doctor sent the employee for X-rays. At that time we were notified it was broke. That was on February 3, 2023.

Employee was working on an excavator 336 and was removing the belly pan. The excess built up material on the pan was too heavy and the pan fell on the employee's foot. The corner of the pan landed on the top of the employee's left boot. It punctured a hole in the boot causing the injury to the foot.

While working on a portable heater, employee reached in to connect a hose back onto the heater and cut their left hand with the propeller. Employee had the fan going because they were trouble shooting. Employee was too close to the fan while they were trying to connect the hose and cut their hand. Employee was not wearing gloves.

Employee was chipping away some welding slag. A small piece flew back towards EE and landed above the safety glasses on EE's eyebrow area. Employee swiped between the safety glasses and the eye. At this time EE felt something in their eye.

Employee was inspecting fan bearings and turning the fan by hand. As the employee rotated the fan by the belts, the belt grabbed EE's glove causing EE to get right little finger caught between the pulley and fan belts. Smashing EE's little finger.

Employee was helping replace a return bin pulley. The socket EE had was too large for the small space. When EE stuck hand up to secure a smaller socket on the nut, the pulley shifted, catching EE's right ring finger between the metal frame and pulley. This caused a laceration to EE's finger.

Employee was shoveling a sand pile when employee stepped wrong and twisted left knee

While splicing a conveyor belt, the employee lifted and pulled on the conveyor belt, then felt a pop in right wrist. Treatment was a first aid until 12/4/2021 when employee was taken to the ER for treatment and prescribed medication.

Employee was removing inner race bearing hitting it with a hammer when a piece of the race bearing dislodged and went into EE's left thigh causing employee to get stitches

When walking through mud the employees foot became stuck causing EE to twist EE's right knee. Employee treatment was first aid until 3/17/2021 when EE was advised by a doctor to start physical therapy this was a first aid case until 3/17/2021

Employee was clocking out wiped sweat from eyes and face using sleeve of shirt and got something in the eye. Employee got Medical Treatment and had a sliver removed from the eye.

EE was climbing down the ladder off the back of the water truck while holding a bucket, left hand slipped off the ladder handrail causing them to lose balance and fall to the ground and twisting an ankle.

While cutting 3/4 inch thick steel plate employee was struck on the left shin by falling plate the employee received bruising and laceration requiring 6 stiches.

EE's were removing ball trays from Sweco screen and one of the screens became lodged. Another employee pushed on the tray dislodging it and when it did, it hit the EE in the mouth causing a minor chip in EE's front tooth.

EE was entering a silo to obtain samples and missed the step causing EE to stumble. When EE reached out to catch self, EE's hand came in contact with a sharp edge of the handrail causing a laceration.

EE was unplugging discharge chute on dryer #2 when hot material broke loose striking the EE on back of neck and ear causing EE to jump from an elevated surface, in doing so EE suffered sprained right heel and minor burns to neck and ear.

EE was observed acting strange. Another EE went to check on EE and found the injured EE passed out. EE did sit up on own and mentioned was experiencing chest pain and numbness in the arm. Emergency Services was called and EE was taken to emergency room for observation and was diagnosed with a panic attack. This is being treated as a first aid case.

EE was changing a bearing on rotating cartridge puffer. The bearing was the load bearing part of rotating mechanism. The EE was using a bar to raise the bearing. Once the faulty bearing was raised, the EE reached under the bearing to remove it when it slide off the bar, mashing the EE's finger. The result was a fracture to EE's thumb.

While cleaning silos sand got in the employees eye, behind their Safety Glasses.

Employee was getting into excavator and suffered a strain/sprain to right arm while pulling self up. EE went to Doctor on 2/06/19. Was released to return to work and schedule a follow-up on 2/22/19. Employee got MRI. Had torn ligament in right Bicep. Returned to work 2/22/19 with restrictions.

EE was traveling down stairs of the dry plant transfer tower. When EE got to the bottom EE slipped on the last step, caught self and wrenched lower back in the process.

High winds started ladder tipping, ladder was caught by Rail/cattle guards. EE was standing in the vicinity and claimed ladder hit EE's hard Hat as it tipped.

EE was assisting in a long cable pull and was located near the end of the line. EE had back turned away from the direction the cable was coming from. EE did not hear co-workers yelling. The cable jumped the tray striking EE on the left wrist fracturing the distal radius.

EE lost footing on the third rung of ladder and fell striking right shoulder on the concrete floor. Safety personnel escorted EE to emergency room. Discharge instruction sheets were provided for a shoulder sprain first aid care only.

Employee was attempting to clean out Clarifier, with a 2 inch pipe. When attempting to push the pipe through sand build-up shoulder came out of socket and immediately went back into socket.

Employee was bending at the waist painting 2ft. x 2 ft. landscaping Rocks with a six inch paint brush. When the Employee felt a pulling and sharp pain the upper middle of back.