Every injury and fatality MSHA has on file. Filter by state, year, sector, classification, experience, or any keyword from the investigator's narrative.
Email me when a new incident matches these filters. One confirmation email; unsubscribe anytime.
Employee was core drilling. The rig shifted slightly while drilling, which caused the barrel to catch the mud pan as it was being extracted. The mud pan struck the employee on the left knee.
An employee had made multiple trips up and down tank stairs to swap tanks and began feeling ill. They went to the Lab and laid their head on desk when another employee observed them and asked a manager to come over and assess. The manager assessed and took employee to ER for evaluation. Employee was treated for dehydration.
While prying the bearing loose, EE's right pinky finger was caught between the prybar shaft and the metal edge of the "top-head" on the right. EE's pinky was smashed causing a laceration. EE was taking to the emergency room and received stitches.
Two employees and a contractor crane operator back a crane into position. One employee was in front and the other was in the back. The crane operator was backing and was not aware the employee in the back had placed themselves behind the crane and the employee was pinned between the hand rail and the crane injuring their leg.
The employee was climbing down off of a railcar and made it to the ground and slipped. They cut left leg on an unknown object. They reported to their supervisor and was taken to local emergency where they received stitches.
Employee was ascending steps at #4 spray dryer area to take the chute out of the car so it could be dropped down. As employee was ascending the steps they tripped and sustained an injury to right knee and right hand. They will have to see and orthopedic surgeon about their hand.
Employee was washing a glass in the sink when it broke causing a laceration to EE's right hand. Employee was treated at the local emergency room and received stitches.
Employee was inspecting a drain pipe at track area, while standing on a mild slope. They slipped and fell, attempt to break the fall with their hands. They felt sharp pain in right shoulder.
Employee was Tightening a flange on an ozone gas line when they received a burst of ozone gas to the face.
Employee was attempting to put a bullet screen on a loading hose. Employee struck the bullet screen with a metal hammer, causing one of the ears to break off and hit them in the mouth and chip a tooth.
Employee was tightening the lid on a tank car with a wrench and the wrench slipped out of EE's hand and EE felt a pain in their lower back. The employee initially tried to treat with first aid but pain worsened and EE wanted to seek medical attention. Employee was seen at local ER and diagnosed with a back strain and taken out of work.
Employee was going to swap lines on top of C tanks and stepped in a 6" trench that had been dug at the base of the steps for water to drain. Employee felt stress on hip and groin area. Employee initially didn't want to go to doctor but pain worsened and on 2/5/25, employee wanted to seek medical attention. Was treated for strain and put on light duty restrictions.
A forklift operator had loaded a supersack bag (1 ton) on a pallet. A coworker later noticed the bag was leaning and attempted to straighten it up by pushing on the bag and felt a sharp pain on the left side of EE's neck and had to seek medical attention. The employee was treated at the ER and taken out of work.
An employee was getting off of the Track Mobile and stepped off onto a piece of loose tin that had been blown off the track shed and was laying on the ground, causing EE to fall to the ground on EE's knees injuring EE's left knee.
Employee was changing out a bullet screen on a slurry tank car and the screen slipped and in a effort to catch it, it caught EE's right pinky finger, smashing it requiring EE to go to the ER for medical evaluation.
Worker was moving another company's scaffolding for said company while wearing gloves and a sharp area on the pieces of the scaffolding's frame cut through the glove as well as the worker's hand. Witnesses were present and the worker required stitches.
Employee was washing #6 filter and was attempting to move the washup hose around and the compression clamp on the hose cut their right wrist.
The employee was attempting to dismount the right side of the forklift when EE's feet got tangled as EE was getting off and EE began to fall. In an attempt to break EE's fall EE grabbed onto the side handle and hurt EE's back.
Employee got in truck and started to leave going to Dukes Mine. Minutes later EE began to feel jittery and dizzy and turned around. EE's coworker went to check on EE and saw that the EE was pale in color and nauseated. The decision was made to take EE to the ER.
EE was cleaning out from under the #4 Feeder and a lump of clay fell from top of feeder and struck the employee in the back of the head. The employee fell forward and hit the front of head.
Employee was walking back into the operator control room and tripped on the lip inside the door causing EE to fall on concrete floor. EE initially thought was ok and administered first aid. Next day, EE observed bruising and swelling and wanted to seek medical attention. On 5/28, EE received negative X-rays and was released to return to work with restrictions.
Boom truck was not setup properly due to limitations caused by concrete barriers. After the boom truck flipped on its side due to outriggers not being deployed an all stop was not called to access the hazards presented by the equipment failure. After attempting to safely stabilize the hoisted load, consideration was not made for a safe clear escape path.
The EE was operating a 14 ton manitex boom truck in a narrow road between B-Tanks preparing to move an empty MCC panel. EE was unable to extend the main outriggers due to width of road. EE didn't like the position and began to pull boom back in and the truck begin tilting, so the injured worker jumped off the boom truck onto the ground.
Employee was exiting a 3ft.trench where 24 inch pipe was being installed. As EE was walking up the trench, EE's left knee give away. EE continued to work until 5:00pm. When EE returned home, later that evening, EE's knee started to swell and become painful.
Employee was using a tool bar to close the bottom door on a hopper car. The bar slipped out of the cog causing EE to mash their finger between the bar and the concrete.
Employee was assisting coworker tilt a 55gal drum so forklift forks could get under and pick up drum to move from a broken pallet. While tilting the drum, employee lost footing, tripped and fell. This incident was initially managed as a first aid but employee continued to experience pain and wanted a medical evaluation on 2-19-24.
IW and co-worker were returning from lunch and headed back to maintenance shop on the golfcart when the IW collapsed and became unresponsive. The Co-worker called 911 and started CPR. The Co-worker was immediately assisted by other co-workers with first aid/CPR efforts until EMS arrived. EMS arrived and transported IW to a Medical Center.
Employee had gotten a clay sample earlier and did not hang the wire rope back over the handrail per work instructions. Employee was checking weights on the #3 bagger and headed back to check bagger #2 and tripped over the wire rope that was partially in the walkway on the platform.
Employee was trying to hook up an airline hose to the air lance and while doing so, they slightly slipped and their arm twisted and they heard a pop in their right arm/shoulder.
EE was looking inside a water tank to check the water level. As EE was stepping down to the floor EE's elbow made contact with a bolt. This incident was initially reported as first aid and treated but injury worsened and EE later received physical therapy from 11/15/23 - 11/20/23 and referred to Ortho for evaluation. No lost time or restricted duty from date of injury.
Employee was a washing a filter with a high pressure water hose when the hose came loose. Employee reached to turn the water valve off with right hand and the hose came out of left hand, whipped and pinched the right pinky finger causing a lacerations.
As the Excavator operator started to access steps to enter cab, the operator felt dizzy. Operator stepped back to ground level and leaned on tracks to regain stability. At that time, the operator was taken to the hospital for observation which resulted in a Medical Complication (low Blood Pressure).
The IW had put degrit screens 2-4 on water and was doing routine checks of the valves and walked into a low clearance valve handle hitting EE's head. IW was wearing a hard hat and injured EE's neck.
Employee was installing bar grating on a steel frame. EE was using a two foot pry bar to slide grating into place. While pushing the pry bar with left hand, EE felt a sharp pain in left bicep. The force from the pushing of the pry bar, caused an internal tear to the lower left bicep of EE's arm.
The employee was entering the warehouse driveway and a truck was in the driveway waiting in line to be loaded. The worker pulled to the left of the truck and made a hard left turn toward the parking area and hit a light pole. The light on the light pole was on at the time of the event. The worker complained of neck and back pain.
The IW was climbing up a hopper car to release the brake and left foot slipped. IW tried to catch self, with right hand and IW's right foot slipped as well. The employee fell onto the track with lower back and fractured the L2 and L3. When the events occurred it was raining and cold.
Driver was climbing into truck and rolled off bottom step onto ground - on back and left shoulder
The employee was washing the tracks and was called on the radio and notified that the railcars were being moved to stand clear. After the 1st & 2nd car passed the employee was snagged by the 3rd car and thrown to the ground breaking EE's L knee cap.
IW took sample upstairs to work it up. EE followed all procedures, washed the screen and went to put solids on the run sheet. EE began to itch intensely and broke out in hives.
Employee was performing maintenance of a spray dryer. while holding a wedge to remove a bearing with a hammer, EE missed the wedge and struck EE's hand.
Employee was standing on an elevated platform to open a valve, employee was standing in an awkward position while attempting to open the valve when employee felt a pain in r shoulder.
An employee was shoveling clay from behind the feeders and belt conveyers and strained back.
The employee operated a loader that had not been operated in about 3 months. The employee noticed a spider bite on right arm when employee was showering after work. Bite was deemed to be from a brown recluse.
The employee was lifting a pipe with a crow bar and the bar slipped causing the pipe to fall on the employee's left ring finger causing a cut that required stitches.
4 QC employees and 2 shipping employees all developed COVID symptoms within a couple of days of each other. The employees worked in close proximity to each other without face coverings.
4 QC IW came down with symptoms of COVID-19 on 7-30-21 and all tested positive. It is unknown who they caught it from, but the employees worked in close proximity with one another while not wearing PPE. 1st day of work missed 8-2-21
4 QC IW came down with symptoms of COVID-19 on 7-30-21 and all tested positive. It is unknown who they caught it from, but the employees worked in close proximity with one another while not wearing PPE. 1st day of work missed 8-2-21
4 QC IW came down with symptoms of COVID-19 on 7-30-21 and all tested positive. It is unknown who they caught it from, but the employees worked in close proximity with one another while not wearing PPE. 1st day of work missed 8-2-21
4 QC IW came down with symptoms of COVID-19 on 7-30-21 and all tested positive. It is unknown who they caught it from, but the employees worked in close proximity with one another while not wearing PPE. This employee is able to work from home on quarantine this is a medical only.
The employee worked with a contractor on 7/12/21 that tested positive for COVID-19. The employee was sent home to quarantine on 7/13/21. The employee developed symptoms over the weekend and was tested on 7/19/21 and the results came back positive on 7/20/21.