17
total records
Showing all 17
November 23, 1998
OR · Metal/Non-Metal
warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator
OTHER
Bend Aggregate & Paving Company · Over-exertion (Not Elsewhere Classified)
UNKNOWN
October 19, 1998
OR · Metal/Non-Metal
warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator
OTHER
UNKNOWN CONDITION NOT REPORTED TO THE OFFICE UNTIL 10-22-98.
September 11, 1998
OR · Metal/Non-Metal
FIRE
Bend Aggregate & Paving Company · Contact with hot objects or substances
SPRAYING DEGREASER ON SHAFT AFTER REMOVING A BEARING. HOT SURFACE CAUSED THE DEGREASER TO IGNITE AND BURN BACK OF LEFT HAND AND WRIST.
June 18, 1997
OR · Metal/Non-Metal
prep plant foreman, supervisor, mill plant supervisor, kiln supervisor
HANDTOOLS (NONPOWERED)
Bend Aggregate & Paving Company · Struck by... (Not Elsewhere Classified)
HIT BEARING WITH A HAMMER, AND A PIECE BROKE OFFHITTING BACK OF HAND & CUT IT. RECD 7 STITCHES.
June 13, 1997
OR · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
HANDLING OF MATERIALS
TAKING RIPPER OFF DOZER, PULLING PIN AND RIPPER ASSEMBLY FELL ONTO FINGER, SEVERING IT AT FIRST KNUCKLE OF MIDDLE FINGER ON LEFT HAND.
June 10, 1996
OR · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
ELECTRICAL
Bend Aggregate & Paving Company · Contact with electrical current
ROLLING UP ELECTRICAL CORD, AND CAME UPON BARE SPOT IN WIRE, THE SHOCK MADE HIM FALL AND HIT RIBS.
April 29, 1996
OR · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
MACHINERY
Bend Aggregate & Paving Company · Contact with hot objects or substances
CUTTING PIPE WITH CUTTING TORCH, PIPE FLIPPED, AND HHOT PIPE STRUCK HAND.
October 20, 1995
OR · Metal/Non-Metal
warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator
MACHINERY
Bend Aggregate & Paving Company · Struck by... (Not Elsewhere Classified)
PIECE OF STEEL IN EYE- LEFT EYE.
October 4, 1995
OR · Metal/Non-Metal
bulldozer operator, universal operator, heavy equipment operator, operating engineer
MACHINERY
Bend Aggregate & Paving Company · Contact with hot objects or substances
UNTHAWING PUMP, USING PROPANE TORCH. WHEN DONE, THE PROPANE NOZZLE FLIPPED OVER RIGHT WRIST.
July 20, 1995
OR · Metal/Non-Metal
laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman
POWERED HAULAGE
WORKING AROUND SHAKER. LOOKING UP. A ROCK CAME DOWN AND BRONT A FRONT TOOTH OFF.
Bend Aggregate & Paving Company · Struck by... (Not Elsewhere Classified)
CUT BY RAZOR KNIFE LEFT FOREARM CUTTING OFF CLEATS OF A CHEVRON CLEATED BELT TO INSTALL CLIP KNIFE SLIPPED OFF CUTTING HIS ARM
February 17, 1995
OR · Metal/Non-Metal
bulldozer operator, universal operator, heavy equipment operator, operating engineer
HANDTOOLS (NONPOWERED)
PIECE OF METAL FLEW IN RIGHT EYE UNDER SAFETY GLASSES WHIEL HAMMERING.
August 9, 1993
OR · Metal/Non-Metal
warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator
HANDTOOLS (NONPOWERED)
Bend Aggregate & Paving Company · Over-exertion in lifting objects
REPITITIOUS SHOVELING IN A STOOPED POSITION PULLED LOWER BACK BADLY.
May 13, 1991
OR · Metal/Non-Metal
warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator
MACHINERY
EMPLOYEES REMOVED A LARGE GEAR FROM THE CRUSHER. THEY USED THE FRONT END LOADER WITH THE GEAR CHAINED UNTO THE LOADER AND PROCEEDED OVER TO THE STEAM CLEANER BESIDE THE TRUCK SHOP. AT THIS P OINT THE CHAIN WAS REMOVED AND THE GEAR WSA SAT UPRIGHT ON THE GROUND. INJURED WAS DESIGNATED THE TASK OF STEAM CLEANING THE GEAR. DURING THIS PROCESS THE GEAR BEGAN TO MOVE AND STARTED TO L
April 24, 1990
OR · Metal/Non-Metal
front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator
POWERED HAULAGE
CLEANING FROM UNDER CRUSHER WITH LOADER AND TAKING MATERIAL TO DUMP SITE. WHILE DUMPING ON PILE LOADER WAS NOT STRAIGHT AND BUCKET WAS A LITTLE HIGH IN AIR, LOADER WENT OVER. I.NAME WAS THROWN OUT OF LOADER HITTING INTO PILE.
Bend Aggregate & Paving Company · Struck by... (Not Elsewhere Classified)
IN THE PROCESS 2F STARTING POND PUMP,CRANK HANDLE CAME OFF AND HIT EMPLOYEE IN FOREHEAD.
Bend Aggregate & Paving Company · Fall onto or against objects
SOME OF OUR EMPLOYEES HAD BEEN REPAIRING OUR ASPHALT PAVING MACHINE. PAVER PARTS WERE LAYING ON FLOOR OF SHOP BUILDING. ANOTHER TRUCK WAS BEING SERVICED IN SHOP AT SAME TIME. INAME AND ANOTHER EMPLOYEE WERE WORKING ONA PROJECT TO PLUMB AN AIRLINE FROM THE SHOP TO A NEW TIRE STORAGE AREA. IN WALKING AROUND FRONT OF TRUCK BEING SERVICED (HOOD WAS OPEN) I,NAME WAS UNOBSERVANT OF PAVER
Showing all 17