Search the record

Maint. mechanic was changing drive belts on fan when finger was rolled around sheave causing cut to left middle finger requiring 12 stitches on outside of finger

Supervisor slipped on loose soil

Hitting bucket tooth adaptor with 20lb sledge hammer piece broke off struck employee and entered inside right leg exiting 4 inches below entry point

Taking a drive shaft out of a haul truck when drive shaft fell smashing left thumb between shaft and rear stabilizer.

Employee was using a 4 in grinder

Lifting heavy object

Employee was cutting belt with utility knife when he cut his left forearm.

Employee was prying rock with pry bar and bar slipped off striking employee in head. Employee was wearing hardhat....

Was cleaning and installing idlers, moved from C belt to pony motor platform. He twisted his knee on a rock on the walkway between C belt and pony motor platform. (knee strain)

Employee was installing belt drive system when an electric motor slid off its mounting bracket injuring employee's left knee and right hand.

Employee was lifting a floor jack approx. 80 lbs. Employee complained of low back pain. Transported employee to health care provider. Diagnosed with lower back strain.

Independent contractor(truck driver) suffered a fatal heart attack while tarping his trailor.

Employee was assisting maint tech changing sreens. Employee reached for a hot torch and suffered burns to his left forearm.

Employee was loading rail car. Employee released brake, then tried to reset brake. Brakes failed. Employee dismounted rail car injuring his left knee.

The injured was loading a truck using a conveyor when fine material lodged in his eye. He suffered a corneal abrasion and conjunctivitis.

Employee was operating a band saw, performing maintenance operations on a water line. Employee's hand slipped under cutting blade. Minor cut to left thumb requiring sutures.

Employee was running up set of stairs which were partially covered with snow. Employee fell to the ground and suffered a low back contusion.

EE was working on a pole mounted light. He attempted to remove a bracket holding the light in place and was shocked by 480 power.

EE was digging a large rock out of the raw crusher the rock fell jarring the bar the EE was using. The bar struck the EE's left forearm.

EMPLOYEE WAS ASSISTING IN REPAIR OF TRUNNION, WHILE REPOSITIONING HE LEANED HIS HAND ON TRUNNION COVER. THE COVER WAS OFF TO THE SIDE LEANING AGAINST BASE. EE GOT HIS LEFT PINKY MASHED BETWEEN THE COVER & BASE WHEN THE COVER SLIPPED & FELL. INJURY REQUIRED STITCHES.

Employee was assisting contractor (truck driver) with hard to operate latch on trailer tailgate, when latch let loose ee mashed right ring finger between handle and tailgate. Received fracture and 20 sutures to repair nail bed.

EE working near welder, accidentally arc flashed in eyes. EE went to doctor that evening. Received drops & ointment for flash burn.

EMPLOYEE WAS OPERATING A BACKHOE TRACTOR TO UNBRIDGE THE HANGUP IN THE FEEDER CHUTE TO THE IMPACT CRUSHER. A SMALL PIECE OF SLATE WAS EJECTED FROM THE CRUSHER HITTING THE EMPLOYEE IN THE MOUTH.

WHILE CLEANING WORK AREA-PLACED 4" STEEL PIPE PIECES ONTO FORKS OF FORK LIFT. CAUGHT FINGER OF LEFT HAND BETWEEN TWO PIECES OF PIPE.

EE REMOVING BOLTS ON CRUSHER WITH AIR POWERED RATCHET. AIR HOSE (3/4"ID) FAILED COMING LOOSE BY FITTING-CAUSING HOSE TO WHIP AROUND AND BLOW DUST INTO EE'S EYES & HITTING EE'S HEAD BY RIGHT EA R. EE WAS WEARING HARD HAT & SAFETY GLASSES WHEN HOSE FAILED-HAT & GLASSES KNOCKED OFF.

EE WAS REPAIRING A 1" WATER HOSE - CUTTING END OF HOSE WITH KNIFE, KNIFE SLIPPED CUTTING LEFT THUMB - NEEDED 8 SUTURES.

EE WALKING ALONG TRAVELWAY, MISSED FIRST STEP OF A SET OF 3 STAIR STEPS. FELL AND LANDED ON 2ND & 3RD STEP, BRUISING LOWER BACK.

EMPLOYEE TRIED TO CLOSE FRONT WINDOW OF TRACKING, STRAINED MUSCLES OF RIGHT SHOULDER WHILE REACHING UP FOR WINDOW.

EE REPLACING BEARING ON CRUSHER ROTOR (ELECTRIC LOCKED OUT), WHILE ANOTHER EE ROTATED IMPACTOR ROTOR, INJURED EE WATCHING BEARING - PLACED HAND (LEFT)BETWEEN ROTOR AND CRUSHER WALL - ROTOR HAM MER CAUGHT HAND BETWEEN ROTOR AND CRUSHER SIDE WALL.

EE ASSISTING MAINT REPLACE CONVEYOR BELT, WHILE CUTTING OFF SECTION OF OLD BELT UTILITY KNIFE SLIPPED AND CUT EE IN RIGHT THIGH - REQUIRED 2 SUTURES.

EE WAS REMOVING A GUARD, PLACED A PIECE OF THE GUARD TO THE SIDE AND WENT TO GET A TOOL. ON HIS RETURN HE HIT HIS HEAD ON THE PIECE HE JUST MOVED, LACERATING HIS FORHEAD REQUIRING 3 SUTURES.

EMPLOYEE ASSISTING MAINT REMOVE BOLT FROM MOUNTING. BOLT SLIPPED AND STRUCK EE ON RIGHT SIDE OF FACE REQUIRING 2 SUTURES TO CLOSE LACERATION.

EMPLOYEE WAS TIGHTENING ALLEN HEAD BOLTS ON ONE CRUSHER WITH T BAR, WHILE TWISTING HE FELT PULL IN MID AND LOWER BACK.

EE WAS SHOVELING SPILLED MATERIAL BACK ONTO THE CONVEYOR BELT, FELT HIS BACK MUSCLES "PULL" WHILE SHOVELING.

OPERATING HAND CRANKED RATCHET, HAND SLIPPED & SKINNED KNUCKLE ON RIGHT LITTLE FINGER. RECIEVED5 SUTURES TO CLOSE AVULSION.

EMPLOYEE WAS REPORTING A HOT STEEL SHAFT FROM A COOLER. GRABBED SHAFT WITH BARE HAND CAUSING THERMAL BURNS TO FINGERS OF RIGHT HAND.

EE USING SLEDGE & SLEDGE WRENCH TO LOOSEN/ADJUST LARGE NUT. EE MIS-HIT SLEDGE & HIT RIGHT HAND ON WRENCH & SLEDGE HANDLE.

EE CUTTING PIECE OF SKIRT RUBBER WITH LITTELITY KNIFE-KNIFE SLIPPED CUTTING EE IN LEFT THIGH REQUIRING 4 SUTURES.

EMPLOYEE, WALKING IN RAINY, MUDDY CONDITIONS, ATTEMPTED TO MOVE 5 HP PORTABLE PUMP, SLIPPED BACKWARDS AND FELL ON RIGHT ARM, FRACTURING A RIB.

EE HELPING TO MOVE PORTABLE TANK(60 GAL.)- WHEN ADJUSTING, HE PINCHED R. MIDDLE FINGER BETWEEN TANK AND LOADING TOOL. EE WAS WEARING GLOVES BUTPINCH CAUSED LACERATION TO PAD OF FINGER. CLINIC CLEANED & CLOSED W/12 SUTURES.

EE ASSISTING WELDER ARC WELD ACHORS INSIDE KILN SHELL-REFLECTED FLASHED BOUNCED INSIDE WELDER HOOD EE WAS WEARING CAUSING FLASHBURN TO EYES.

EE OPERATING F/E LOADER TO CLEAN OUT MATERIALS ON RAMP, EE PUSHED DECLUTCH INSTEAD OF BRAKE JOLTED HIMSELF CAUSING BACK PAIN. TAKEN TO CLINIC 8-1-01 800 AM OBSERVATION ONLY. FOLLOW UP VISIT 8- 6-01-CLINIC ORDERED PHYS. THERAPY WITH LIGHT DUTY RESTRICTIONS. PS OPERATOR WAS WEARING SEAT BELT.

EE SHOVELING BELT SPILLAGE FROM UNDER STOPPED BELT, GOT RIGHT HAND TOO CLOSE TO ANGLE BRACING & GOUGED A 1/2" X 1/2" X 3/16" PIECE OUT OF HIS MIDDLE FINGER, WAS NOT WEARING GLOVES. RECEIVED 5 SUTURES AT CLINIC.

EE ON ONE KNEE, PUSHING A 100 TEN HYD. JACK INTO POSITION, WHILE PUSHING FELT PAIN IN UPPER BACK.

EE SHOVELING SPILLED MATERIAL, COMPLAINED OF PAIN IN RIGHT ELBOW AND SHOULDER.

EE WAS WALKING UP INCLINED WALKWAY & FELT MUSCLEIN RIGHT CALF STRAIN (MUSCLE PULL).

EE WAS HOLDING PIECE OF CHUTE THAT A WELDER WAS TACK WELDING, INADVERTANTLY RECEIVED WELDING FLASH.

CONTRACTOR WAS WORKING WITH ASSOCIATE ON OPERATINGY STATIONARY HOIST. ASSOCIATE HAD BOX WITH CONTROLS AND WAS GETTING OUT OF HIS REACH. HE SWUNG THE BOX WITH CONTROLS WITCH WAS ON A CABLE TO H IS PARTNER, PARTNER MISSED AND BOX HIT HIS CHIN.