Search the record

EE WAS CUTTING A PIECE OF METAL WHEN A HOT SLAG LANDED INTO HIS LEFT EAR EE DOUSED WITH WATER IMMEDIATELY. PROPER SAFETY EYE AND GLOVE PROTECTION WAS USED.

ON 8-2-94, INJURED SLIPPED FROM THE LADDER WHILE GREASING CRUSHER FEEDER BELT. DID NOT WANT TO SEE A DOCTOR, CONTINUED WORKING. ON 8-4-94 HE WAS COMING OUT OF THE SILO DOOR AND HIS KNEE POPPED .

HE WAS CLEANING PRECIP #1 AND SLIPPED AND HIT LEG ON BEAM.

EMPLOYEE WAS HELPING CARRY METAL SHEET INTO THE SHOP AND STRAINED HIS LOWER BACK MUSCLES.

WHILE TIGHTENING A NUT WITH; A WRECH, THE WRENCH SLIPPED OFF THE NUT & HE FELL BACK INTO THE CONTROL PANEL HURTING HIS RIGHT SHOULDER.

EMPLOYEE WAS STACKING 50LB. BALES OF CAT LITTER WHEN IT CAME TO THE POINT THAT HE COULDN'T WALK ON LEFT FOOT/LEG WITH OUT IT HURTING, THIS WAS 3-25-94. HE HAD ALSO HAD PAIN ON 3-23-94. HE HA D ALSO HAD PAIN ON 3-23-94 BUT THOUGHT THAT REST WOULD MAKE IT FEEL BETTER. EMPLOYER NOTIFIED 3-25-94.

EE RIGHT HAND WAS PUNCTURED WITH A RUSTY PIECE OF WIRE.

EMPLOYEE WAS REPAIRING PALLETS, TURNED AROUND & STEPPED ON NAIL. PUNCTURE WOUND TO LEFT FOOT.

EMPLOYEE WAS WELDING VERICLE & OVER HEAD STRUCTURAL BEAMS.

WORKIGN IWTH FIBER GLASS INSULATION, AND WELDING 1/4 PLATE STEEL, NOTICED IRRITATION IN LEFT EYE.

CUTTING IRON ON CHOP SAW. A FOREIGN OBJECT FOT INTO LEFT EYE.

WHILE CLEANING TAIL PULLEY OF CRUSHER DISCHARGE BELT,T HE BELT ROLLED BACKWARDS, PULLING EMPLOYEES RIGHT ARM INTO TAIL PULLEY. THE BELT WAS LOCKED OUT, AND THE GUARD HAD NOT BEEN REMOVED. LE MPLOYEE WAS USING A BAR TO CLEAN AROUND TIAL PULLEY. WE HAD HELD SAFETY MEETINGS INVOLVING ALLE MPLOYEE EXPOSED TO THIS TYPE OF WORK, IN ORDER TO INSURE EVERYONE UNDERSTANDS THE DANGER.

EMPLOYEE HURT HIS LEFT ARM WHILE PUTTING A GRATE ROD IN CHAIN.

SHOVELING @ JUNCTION OF SPILLAGE BELT & ELEVATOR BELTS TURNED & LIFTED @ THE SAME TIME & GOT A SHARP PAIN IN LOWER BACK.

WHILE RAISING OIL FILTER ELEMENT FROM HOUSING AT FUEL PUMP AREA, HAND ON WINCH SLIPPED AND HITRIGHT HAND.

EMPLOYEE WAS CHANGED CASTING ON A CHAIN, HE WENT TO GET OFF THE CHAIN AND SAT ON REBAR AND THE BEBAR BROKE LOOSE AND HE FELL TO THE GROUND LANDING ON HIS BACK.

EE WAS RUSHING TO GET TO THE NEXT WORK STATION AND STEPPED ON THE CENTER PALLET AND TWISTED HIS LEFT FOOT.

EMPLOYEE WAS GETTING OUT OF DUMP TRUCK. HE LOST HIS FOOTING AND HIT LEFT HAND ON THE CORNER OF THE DUMP TRUCK BED. (EMPLOYEE HAD A HAMMER IN HIS HAND)

I-BEAM WAS STANDING UPRIGHT, IT WAS KNOCKED OVER, AND HAND WAS CAUGHT UNDER I-BEAM.

WHILE WORKING NEAR SILO TEN I WAS WINDING UP AN EXTENSION FORM WHEN AN EIGHT FOOT WOODEN LADDER FELL HITTING ME ON THE RT SIDE OF HARD HAT

68935 USING A SLEDGE HAMMER TO DRIVE A PIN OUT OF A 35 TON CRANE WHICH WAS BEING PREPARED FOR SHIPMENT SHARP PAIN WAS FELT IN BACK ON RIGHT SIDE SHOULDER BLADE AREA THIS WAS THOUGH TO BE AN AG 79551TION OF AN EXISTING CONDITION BUT ON 8-6-92 JACKS DR REQUESTED THAT IT BE REPORTED AS A NEW INJURY.

WHILE INSTALLING A BUCKET TOOTH A METAL CHIP ENTERED RIGHT FORE ARM WHEN THE TOOTH WAS STRUCK BY A HAMMER, CAUSING A SMALL LACERATION. THE WOUND WAS CLEANED AND BANDAGED. ON A FOLLOW UP, IT WA S DISCOVERED THAT A SMALL FOREIGN OBJACT REMAINED IN THE ARM. THIS WAS REMOVED ON 6-9-92.

EE WAS USING METAL RAKE TO REMOVE CHUNKS OF REFRACTORY FROM A CHUTE FROM THE KILN DISCHARGE. HE ACCIDENTALLY DISLODGED THE METAL CHUTE COVER WHICH HIT HIS RIGHT FOREARM, RESULTING IN BRUISES & CONTUSIONS.

PACKAGING EQUIPMENT WAS OPERATING AUTOMATICALLY.OPERATOR WAS CLEANING MATERIAL FROM UNDER MACHINE.A FOREIGN BODY GOT INTO HIS RIGHT EYE.

LIFTED THE TAIL GATE ON HAUL TRUCK TO CLOSE IT.

INJURED WAS WELDING, HE REMOVED HIS WELDING HOOD AND A PIECE OF FOREIGN MATERIAL GOT INTO HIS RIGHT EYE.

USING OPEN END WRENCH TO ADJUST COAL MILL ROLLS. WRENCH SLIPPED CAUSING HIS RIGHT INDEX FINGER TO HIT A NUT ON THE COAL MILL THE RESULT WAS CONTUSION OF RIGHT INDEX FINGER IN NAIL AREA.

INJURED WAS CUTTING A PIPE WITH ACETYLENE/OXYGEN TORCH.HE ACCIDENTALLY DROPPED THE CUTTING ATTACHMENT.AS HE TRIED TO CATCH THE ATTACHMENT THE FALME BURNED HIS RIGHT FOREARM-THE BURN WAS APPROX 1 1/2" IN DIAMETER.

TURNHEAD POSITIONING BAR SLIPPED OUT OF HIS HANDS. BAR HIT HIS LEFT SHOULDER. EE WAS STANDING ON AN ELEVATED PLATFORM WHICH CAUSED HIM TO BE IN A POSITION WHICH ALLOWED THE POSITIONING BAR TO HIT HIS SHOULDER.

FILLING BALER BAGS SEALING IT LEFT FOREARM STARTED ACHING

I NAME WAS WALKING THROUGH THE PRODUCT MILL BUILDING WHEN A FOREIGN PARTICLE GOT IN H IS LEFT EYE

HE WAS CLIMBING A LADDER IN THE BACK OF A WATER SPRINKLER TRUCK. HIS FOOT SLIPPED WHICH CAUSED HIM TO CATCH HIMSELF WIGH HIS RIGHT ARM TO PREVENT A FALL.

I NAME STATED THAT AS HE WAS WALKING UP THE STEPS TO WAREHOUSE #2 HE FELT A PAIN IN HIS RT KNEE

I NAME WAS INSTALLING A NEW SHAFT IN THE PRIMARY HAMMER MILL HE DROPPED THE SHAFT ACCIDENTALY BRUISING RT HAND

STACKING BAGS ON PALLET SOME FOREIGN MATERIAL IN EYE

WHILE LIFTING A 100# BAG OF REFRACTORY, HE FELT A PAIN IN LEFT WRIST. DR. DIAGNOSED CONDITION AS A SPRAINED WRIST.

STACKING BAGS ON PALLET AND HE TWISTED HIS LEFT SHOULDER.

EYES WERE BURNED BY FLASDH OF WELDER I NAME WAS HOLDING A PIECE FOR I NAME TO WELD

I NAME WAS STACKING 50# BAGS ON A PALLET HE FELT A PAIN IN HIS LOWER BACK

WHILE STACKING BAGS ON THE 10 LB BAGLINE, EE PLACED A BALE ON THE PALLET AND WHILE STRIGHTENING UP EXPERIENCED A PRESSURE TYPE PAIN IN THE LUMBER REGION OF HIS BACK.

WHILE UNPLUGGING THE CRUSHER THE BAR, HE WAS USING HIT THE HAND RAIL AND BOUNCED UP AND HIT THE SIDE OF HIS RIGHT EYEBROW CAUSING A CUT.

EE WAS STACKING 25# BAGS ON A PALLET. HE TURNED TO PICK UP BAG AND EXPERIENCED PAIN IN LOWER BACK.

EE WAS CLIMBING A LADDER WHEN A FOREIGN PARTICLE GOT IN HIS EYE.

HE WAS THREADING A SEWING MACHINE WHILE A MECHANIC WORKED ON THE MACHINE. THE MECHANIC TURNED THE DRIVE PULLEY WHICH CAUSED THE NEEDLE TO CATCH HIS FINGER.

HE WAS USING A SHOVEL TO CLEAN LOOSE CLAY FROM BASE OF HAMMERMILL WHICH HE OPERATES. HE STARTED HAVIN GPAIN IN HIS LOWER BACK WHICH WAS DIAGNOSED AS LOWER BACK STRAIN. HE HAS CONTINUED TO WO RK OPERATING THE UNLOADING STATION AND HAMMERMILL.

PACKING BAGS IN BALE USED KNIFE TO CUT PLASTIC CUT FINGER USED CLOSED WITH SUTURED

HE WAS USING A PRY ROD TO SEPARATE CRACKING ROLLS. PRY ROD SLIPPED CAUSING HIM TO FALL BACKWARD. HE CAUGHT HIMSELF BY GRABBING AN ADJACENT HAND RAIL. BY 7:23 HIS BACK STARTED HURTING HIM. ON 7 -25-90 HE TOLD US THAT THE PAIN WAS WORSE.

AT APPROXIMATELY 7:45 AM DURING START-UP,FEED WAS PLUGGED IN CONE.INJURED LOCKED OUT CONVEYOR AND CRAWLED UP ON CONVEYOR TO UNPLUG HOPPER.HIS HAND WAS BEING HELD BY MATERIAL AND AS INJURED WAS GETTING OFF CONVEYOR,SOMETHING POPPED IN HIS BACK CAUSING BACK PAIN.

HE WAS USING GRINDING WHEEL TO CLEAN METAL SURFACE FOR REPAIR GRINDING WHEEL TOUCHED LEFT LEG ABOVE KNEE ACCDENTALLY CUT ON LEFT LEG OCCURRED.

WALKING TRIPPED ON PALLET HIT NOSE AND MOUTH ON HANDLE OF JACK CHIPPED FRONT RT CENTRAL TOOP TOOTH FRAC NASAL BONE