Search the record

EMPLOYEE WAS PUTTING A SCREEN IN SHAKER AND AS HE BENT BACKWARDS TO FIT THE SCREEN INTO THE SHAKER HE PULLED A MUSCLE IN HIS BACK.

EMPLOYEE WAS DISCUSSING A PROJECT WITH THE RELIEF OPERTOR THE RELIEF OPERATOR WAS RUNNING A DOZER & UNCOVERED A NEST OF BEES

EMPLOYEE WAS CUTTING BOLT GROOVES FOR SKIRTING WITH A BELT KNIFE ON CONVEYOR AND CUT THROUGH SKIRTING INTO FINGER.

EMPLOYEE WAS HOLDING LARGE PIN PUNCH. CO-WORKER WAS DRAWING OUT PIN BY STRIKING PIN PUNCH WITH HAMMER. ERRANT BLOW CRUSHED THE END OF HIS FINGER.

EE WAS CHANGING SCREENS ON SHACKER 110. HE STOOD ON TOP SIDE OF SHACKER TO OPEN GATE, LOST HIS BALANCE AND FELL OVER BACKWARD ON TO DECKING FLAT ON HIS BACK.

EMPLOYEE WAS GRINDING ON 16IN STD WALL PIPE TO PREPARE FOR WELDING HE HAD SAFETY GLASSES ON FOREIGN PARTICLE GOT UNDER GLASSES & INTO HIS LEFT EYE

WHILE CHANGING SCREEN CLOTH RT HAND SLIPPED OFF SCREWN RAIL & HIT BROKEN SCREEN CLOTH WITH 5TH FINGER ONE STRAND OF SCREEN CLOTH PUNCTURED THROUGH WORK GLOVE & FINGER

TILTING BRAKE CALIPER OUTOF THE WAY, SO HUB & ROTOR COULD BE REMOVED. EMPLOYEE WAS LOWERING 12 O'CLOCK CALIPER BACK INTO POSITION TO CHANG EPIVOT POINTS, CALIPER SLIPPED AND SMASHED EKMPLOYEE S' FINGER BETWEEN IT AND THE ROTOR.

ELECROCUTION BY EITHER 580V 3 PHASE 3 WIRE MOTOR CONTROL CIRCUIT OR 120V CONTROL CIRCUIT

LARGE SLABS OF CONCRETE WEDGED IN TRAIELR OF #7643. STANDING ON THE GROUND THE SLABS WERE ABOUT 8F T HIGH WITH DIRT PILED ON TOP OF SLAB FORMING A PEAK SOT HE CHAIN SLID BACK DOWN CAUSING DIR T TO SLIDE MAKING A DUST STORM. HE COULD NTO SEE CHAIN SLIDING AND THE HOOK HIT HIM.

EMPLOYEE HAD HOOK ATTACHED TO A RUSTY PIECE OF METAL TO BE LIFTED THAT WAS CUT LOOSE WHILE LIFTING METAL PIECE HOOK PULLED THRU IRON DUE TO METAL BECOMING BOUND CAUSING HOOK TO FLY UPWARD & ST RIKING EMPLOYEE ON RT SIDE OF FACE AT THE MOUTH AREA

EMPLOYEE WAS TALKING TO A FELLOW EMPLOYEE IN THE LAB. WHEN HE LEFT THE LAB HIS HAND WAS HURTING AND ITCHING. HE WENT TO THE DOCTOR & WAS TOLD HEHAD BEEN BITTEN BY A SPIDER.

ELMPLOYEE WAS ASSEMBLING TRASMISSION CLUTCH COMPONENT TO SUPPORT SHAFT, COMPENT SLIPPED FROM HIS HAND AND PINCHED LEFT HAND PALM SIDE AT 4TH AND 5TH FINGERS.

EMPLOYEE WAS ROLLING GEAR TO HUB ASSEMBLY PAST FORKLIFT, THE GEAR TIPPED OVER CUTTING HIS RIGHTRING FINGER BETWEEN THE GEAR AND FORKLIFT.

EMPLOYEE WAS DRIVING WITH LEADMAN LOOKING AT SOME GRADE STAKEN BY PROPERTY LINE WHEN A BEE FLEW IN HIS WINDOW. HE GOT OUT OF TRUCK, AND BEE STUNG HIM ON LEFT LOWER EYE LID.

EMPLOYEE WAS CUTTING A HOLE FOR A PIEP ON #2G SHAKER SCREEN TANK WITH A CUTTING TORCH, METAL POPPED AND SLAG WENT INTO HIS RIGHT EYE. UNDER CUTTING GLASSES.

EMPLOYEE WAS CUTTING I BEAM ON #15 SHAKER SCREEN, HE SAT UP IN A TWISTING MOTION AND STRAINED HIS BACK.

EMPL WORKING ON LOADER DRIVING BUSHING FROM BUSHING BORE WITH 10 LB SLEDGE HAMMER AND 4' PUNCH. THE END OF THE PUNCH LOST CONTACT WITH THE BUSHING,HIT END OF PUNCH WITH HAMMER,DROVE HAND AND P UNCH INTO SHARP EDGE OF BELL CRANK.

EMPLOYEE WAS PRYING AND TWISTING IN AN AWKWARD POSITION WHILE REMOVING AND INSTALLING SCREENS BETWEEN DECKS.

54736YEE CLEANING MUD OUT OF 4FT CRUSHER WITH A 6FT CROW BAR BAR CAME BACK & HIT EMPLOYEE IN THE EAR LACERATING IT

HOLDING GRINDER JUMPED BACK STRIKING KNEE

EMPLOYEE WAS GRINDING AN EDGE OFF OF A PIN BORE (RECEIVER) TO A BOOM BOSS ON A LOADER & LACERATED HIS RT INDEX FINGER

EMPLOYEE WAS WALKING ON CATWALK WHICH WAS CLEAR OF OBSTRUCTIONS HE STEPPED DOWN INCORRECTLY CAUSING A TWISTING MOTION INJURING HIS ANKLE.

EMPLOYEE WAS TIGHTENING BOLTS ON SPLICED CONVEYOR AND SLIPPED OFF CONVEYOR FRAME #44 AND LACERATED HIS LEFT HAND REQUIRING SUTURES.

USING CUTTING TORCH TO CUT HOLE PC OF HOT STEEL WEN DOWN HIS CLOTHING AND BURNED HIS SKIN ON LOWER ABDOMEN

EMPLOYEE WAS INSTALLING DRIVE COMPUND ON PRODUCTION LOADER #5218 AND NOTICE A PAIN IN HIS CHEST.

EMPLOYEE WAS CHECKING OIL LEVEL IN TANK OF CRUSHER WHEN 2IN WATER VALVE BLEW OFF OF 8IN PIPE WATER PRESSURE BLEW OFF EMPLOYEES SAFETY GLASSE CAUSING WATER TO GO DIRECTLY INTO EMPLOYEES EYES CA USING INJURY TO H IS EYES

EMPLOYEE WAS ANSWERING T ELEPHONE AT MAIN CONSOLE & HEARD HIGH PITCH NOISE WHICH HAPPENED INTERMITTENTLY FINALLY CAUSING PAIN IN THE EMPLOYEES EARS

NOT A NEW ACCIDENT-AGGRAVATION OF PREVIOUS INJURY. DOCTOR PUT EMPLOYEE OFF WORK FOR ONE DAY.

EMPLOYEE WAS CLEANING SOCKET SEALING RING ON 3 FT. CRUSHER USING A SCRAPER. THE SCRAPER HIT A SHARP EDGE ON SOCKET SEALING RING CAUSING EMPLOYEE'S FINGER TO SLIP HITTING THE SHARP EDGE OF RING LACERATING HIS FINGER.

ON TOP OF POWER SCREEN SHAKER CHANGING THE TOP SCREEN HOLDING ENTRY END UP WITH L HAND TO CLEAR BOTTOM OF FRAME FINGER CAUGHT BETWEEN SCREEN AND FRAME Y

EE WAS LOOKING THRU OLD SCREEN FOR PARTS FOR SCRUBBER AND GRABBED A SHARP SCREEN, LACERATING HIS RING FINGER ON RIGHT HAND.

USING HAMMER ON BUCKET TEETH,PIECE OF METAL WENT INTO WRIST.

EMPLOYEE WAS TRYING TO REMOVE A FOREIGN OBJECT FROM DROP CHUTE AT #122 FEEDER GATE, WHILE TRYING TO REMOVE THE OBJECT IT FELL ON EMPLOYEES HAND PINNING ARM BETWEEN CONVEYOR BELT AND OBJECT.

EMPLOYEE WAS BARRING JAW PLATE AND THE BAR SLIPPED AND HIT HIS TEETH.

EMPLOYEE WAS INSIDE KUE-KEN JAW CRUSHER WORKING, HINGE PIN CAP AND SOCKET WAS STUCK ON HEAD OF BOLT, HE PULLED ON THE SOCKET WHEN IT BROKE LOOSE IT SMASHED HIS FINGER BETWEEN SOCKET AND FRAME FOR CATWALK.

EMPLOYEE WAS PULLING A FRAYED RUSTY CABLE OUT OFTHE FEEDER &THE CABLE PUNCTURED HER RT ARM ABOUT THE WRIST

EMPLOYEE WAS CUTTING BASE OF STAIRWAY WITH CUTTING TORCH, HAND RAIL BROKE CAUSING EMPLOYEE TO SUSTAIN INJURY TO LEFT THIRD FINGER.

EMPLOYEE WAS WORKING AROUND PLANT DOING VARIOUS JOBS, CUTTING TIGHTENING BOLTS, ETC., WHEN FOREIGN BODY ENTERED HIS LEFT EYE.

EMPLOYEE WAS CUTTING OLD SCREEN OUT OF SCRUBBER WITH CUTTING TORCH AND GOT SOETHING IN HIS LEFT EYE.

EMPL WALKING UP STAIRS TO MEDIA PLANT,STAIRS WERE WET,ROCKY AND EMPL SLIPPED AND FELL ON RIGHT HAND.

EMPL WAS CLIMBING ON CONVEYOR HE WAS CUTTING STEEL AND LET GO WITH ONE HAND AND IN DOING SO HE FELL BACK AND ROLLED INTO A TROUGHING ROLLER BRACKET INJURING HIS RIBS

EMPLOYEE WAS CHANGING DISCHARGE SCREEN HE STEPPED DOWN FROM SCREEN & TWISTED HIS ANKLE ON WALKWAY

EMPLOYEE WAS WORKING ON CONVEYORS CUTTING PIECES OF STEEL USING A CUTTING TORCH WHEN HE LOST HIS FOOTING AND FELL INJURYING HIS LOWER BACK.

EMPL WAS NEXT TO #2 CONVEYOR WASHING OUT CONVEYOR AND A ROCK FELL FORM TOP DECK AND HIT HER ON THE L SHOULDER