Search the record

EMPLOYEE WAS CLOSING DOOR ON BOILER AND HIS FINGER GOT CAUGHT.

EE WAS ON LADDER WHEN THE WRUNG BROKE AND HE FELL BACKWARD CATCHING HIS LEG ON ANOTHER WRUNG.

EE WAS CLEANING CLINKER HANDLING SYSTEM, WHILE ABOVE HIM MAINTENANCE PERSONAL J0GGED THE BELT CAUSING A LUMP OF CLINKER DUST TO FALL ON HIM

EE REMOVED RADIATOR CAP FROM A DIESEL ENGINE THAHAD JUST BEEN SHUT DOWN. ANTIFREEZE SPRAYED OVERHIM

EE WAS POKING DOWN WET MATERIAL WHEN A LARGE LUMP BROKE LOOSE AND FALLING ON THE BAR WHICH HE PULLED UP SUDDENLY CAUSING INSTANT PAIN IN HIS SHOULDER.

EE WAS REPLACING DUST COLLECTOR PIPE OVERHEAD AND FELT A PULL IN HIS SHOULDER.

EMPLOYEE WAS ASSISTING IN PULLING THE TRACTION WHEEL OUT OF THE ELEVATOR HOUSING WHEN THE COME-ALONG SLIPPED CAUSING THE WHEEL TO FALL AND HIT HIM.

EE OPENED A WINDOW THAT HE THOUGHT AN OUTSIDE CONTRACTOR WAS DONE WORKING ON AND THE TOP WINDOW PANE FELL ON HIM.

EE WAS INSPECTING FOR PROPER CONTACT OF COLLECTOR SHOES WITH MAIN LINE T-BART. AT THE SPLICE IN T-BAR THE COLLECTOR SHOE WAS TURNED OVER CAUSING A LARGE ELECTRICAL FLASH.

EE WAS USING A JACKHAMMER WITH AN 8" BIT TO BREAK UP A LARGE LUMP OF HOT CLINKER. WHEN EXTRACTING THE BIT IT CAME IN CONTACT WITH HIS FOREARM.

EE WAS CHANGING VALVES ON SILO PIPES AND PULLED LOWER BACK WHILE PULLING VALVE OPEN.

ON 6-24-99 EE WAS PULLING UP ON A SAMPLE LINE WHEN HE FELT A PAIN AND AGAIN ON 7-9-99 WHE HE BENT OVER TO LIFT A T-BAR IN PLACE. HE ALSO FELT A LUMP0 IN THE GROIN AREA.

EE STEPPED ON PRESSURE WASHER WAND WHILE WATER WAS ON AND HOT WATER WENT INTO HIS BOOT.

EE WAS RECONSTRUVCTING FEED HOPPER AND FELT DIRT OR SOMETHING GO IN HIS EYE.

THE THREADED STOCK USED TO PULL THE COUPLING BROKE UNDER PRESSURE, FLEW AND HIT HIS LEFT KNEE AND LEG.

EE WAS WORKING IN BACK OF 1 RAW MILL AND BUMPED HIS HEAD ON THE FEED END TRANSITION CHUTE AND JARRED HIS NECK.

IN THE PROCESS OF CLEANING THE SILO, CONTRACTOR'S SUPERVISOR ENTERED THE SILO. A LEDGE OF HARDENED CEMENT ON WHICH HE WAS STANDING GAVE WAY CAUSING HIM TO FALL TO THE BOTTOM OF THE SILO. A RES ULTING AVALANCHE OF CEMENT CASCADED DOWN UPON HIM AND BURIED HIM.

EMPLOYEE SLIPPED ON ICE WHEN ENTERING BUILDING. HIS FEET WENT OUT FROM UNDER HIM AND HE LANDED ON HIS RIGHT SIDE. HE WAS PUT ON MODIFIED ACTIVITY WITH LIFTING RESTRICTIONS.

EMPLOYEE WAS OPERATING A BOBCAT TO MOVE HEAVY BRICK THAT HE HAD TO HIT THE BRICKS HARD TO BREAK IT UP. WHEN HE CLIMBED OUT OF THE BOBCAT HIS LEFT ARM HAD NO STRENGTH. HE IS ON UNRESTRICTED DUTY, BUT ON 1/29/99 HE WAS SENT FOR AN MRI.

EE TWISTED HIS ANKLE WHEN HE STEPPED INTO A HOLE& FELT A SHARP POP & PAIN

EE WAS ON PLATFORM WITH CO-WORKER CHECKING OUT HOIST. CO-WORKER LEFT PLATFORM TO PULL THE POWER ON THE HOIST & WHEN HE RETURNED EE HAD ALREADY FALLEN. OTHER EE ON GROUND SAW EE LEANING TOWARD THE HOIST AND WHEN HE LOOKED BACK, HE WAS GONE. HE RAN TO THE PLATFORM.

VACUUMING IN PIT, FELT AS THOUGH HE COULD NOT BREATH. CEMENT DUST AGGRAVATED A PRE EXISTING CONDITION (STREPTHROAT & BRONCHITIS)

EE WAS REMOVING FOLLOWER PLATE WHEN IT SLIPPED PINCHING HIS FINGER BETWEEN PLATE & PUMP SHAFT

EE WAS REPAIRING COAL BELT AFTER COAL FIRE

EE WAS REPAIRING COAL BELT AFTER COAL FIRE

EE WAS REPAIRING COAL BELT AFTER COAL FIRE

EMPLOYEE WAS CLIMBING LADDER ON TRUCK, SLIPPED AND FELL BACKWARD STRIKING HIS WRIST ON GROUND.

EE WAS WALKING TO HIS TRUCK WHEN HE SPRAINED HISRIGHT ANKLE WALKING ON ROUGH SPOT IN CONCRETE

EE WAS ADDING OIL TO THE JACK,WHEN TIGHTENING THE PLUG THE JACK SLIPPED SPREADING THE THUMB APART

EE WAS LIFTING DUST CONVER LID FROM BELT LINE WHEN IT SLIPPED OUT OF HIS GRASP PINCHING HIS FINGER BETWEEN THE SIDE TAILS OF THE BELT

EE WAS CLIMBING A LADDER CARRYING A C-CHANNEL. THE BEAM FLIPPED IN HIS ARM BRUISING HIS MUSCLE

EMPLOYEE WAS CUTTING AIR LINE HOSE AND THE KNIFE SLIPPED CUTTING HIS INDEX FINGER.

AS AN ELECTRONIC TECHNICIAN HE CLAIMS USE OF HAND TOOLS HAS CAUSED CARPAL TUNNEL SYNDROME. HAD SURGERY 4.21.98. AND 5.21.98.

EMPLOYEE WAS POKING CLINKER LUMPS OUT OF FINISH MILL. HAD SURGERY 6.24.98.

EE SLIPPED ON LADDER RUNG GOING FROM SCAFFOLD TO LADDER, CAUSING HIM TO STEP DOWN HARD ON HIS RIGHT LEG

EMPLOYEE WAS SHOOTING THE KILN GUN AND THE GUN KICKED BACK HITTING HIM IN THE MOUTH. REPORTING BECAUSE OF TEETH RESTORATION.

EE TRIPPED GOING UP STEPS & PULLED RIGHT SHOULDER GRABBING FOR THE RAIL TO CATCH HIS FALL.

DUST PARTICLES ENTERED EYE WHILE WELDING.

EMPLOYEE WAS POKING LUMPS OF ROCK WITH A STEEL BAR ON SMALL CONCRETE PLATFORM. HE TWISTED AND SLIPPED OFF THE PLATFORM LANDING ON THE GROUND.

REMOVING SPROCKET IN CRUSHER BLDG, FINGER GOT CAUGHT BETWEEN GUARD AND SPROCKET.

EE WAS USING A PRY BAR TO UNPLUG A BLOCKED SHUTE. WHEN THE MATERIAL STARTED MOVING IT FELL ON HIS LEFT HAND.

HE WAS WALKING DOWN RAMP TO TAKE LOADED TRUCK TO QUARRY WHEN HE SLIPPED ON CLINKER AND TWISTED HIS KNEE. THIS INJURY HAS NOW REQUIRED SURGERY.

HE WAS SUPERVISING CUTTING WEIGHT OFF HAMMER BEING IN CLOSE PROXIMITY TOTHE AIR ARCING BEING DONE BY THE REFLECTION OF THE ARC HE RECEIVED WELDER'S FLASH IN BOTH EYES.

HE WAS LOOSENING BOLT/NUT ON A PORTABLE FAN. THEADJUSTABLE WRENCH SLIPPED OFF AN HIT HIM IN THE MOUTH. HE CHIPPED/ CRACKED TWO LOWER FRONT TEETH. CHS TOLD HIM TO CONSULT A DENTIST. X-RAY SHOWE D MICROFRACTURES AND NOW, 10 MONTHS LATER, REQUIRE ROOT CANAL THERAPY.

EE WAS CHECKING 4001 AND 4002. THERE WAS CLINKER LAYING ON CATWALK ALONG 4001 WHICH THE EE SLIPPED ON.

EE WAS WORKING ON DRIVE LINE GUARD. WHEN HE REMOVED HIS HAND HE CUT HIS FINGER ON A SHARP EDGE.

EE WAS WALKING DOWN TOWARD OPEN END OF WAREHOUSETO TELL A DRIVER TO BACK IN WHEN EE WAS KNOCKED DOWN FROM BEHIND BY THE FORKLIFT OPERATOR, WHO COULD NOT SEE HIM, AND LANDED ON HIS LEFT SIDE.

EE WAS REBULDING #6 FEED PUMP. HE PULLED THE RUNNER FROM THE PUMP AND THE FOLLER PLATE FELL PINCHING HIS HAND BETWEEN THE RUNNER AND FOLLOWER PLATE.

EE WAS TRYING TO FREE ROLL NOT TURNING WITH BELTON CONVEYOR & HIS GLOVE GOT CAUGHT ON BELT PULLING HIS ARM.

EMPLOYEE WAS WORKING IN THE CRUSHER BREAKING UP METAL WHEN HE HHAMMERED ON A BOLT TO FREE IT A PIECE OF METAL BROKE OFF AND HIT HIM ON THE LEFT TEMPORAL AREA.