Search the record

THE RADISTON OVER HEATED ON THE 600 HOE. INJURED HAD CLEANED SCREEN AND HAD HIS ARM INSIDE VENTS, TO TIGHTEN WING NUT. HE SLIPPED AND INJURED HIS RIGHT FOREARM. HE SLIPPED OFF THE CAT PADS.

SLIPPED ON FINE CONE CRUSHER AND HIT MY LEG ON IT.

EE WAS ASSISTING A LIFT OF A STATIONARY JAW DIE THAT FELL OUT. WHEN THE JAW HOOK STRAIGHTENED OUT A LOAD CAME OFF FORKLIFT. HE WAS STRUCK IN THE MOUTH WITH THE BOOM ON THE FORKLIFT. EE WAS DIS ORIENTED. 911 CALLED 1:32 PM BLEEDING FROM MOUTH-LACERATED INSIDE UPPER LIP.

RETURN ROLLER WAS WORN OUT ON CONVEYER, EMPLOYEEWAS ATTEMPTING TO REPAIR IT.

WAS WSAHING MATERIAL FROM AROUND CRUSHER MOTOR AND SLIPPED AND FELL 6 FT ONTO CONVEYER BELT.

EE WAS AT THE SWITCHROOM PUT HIS ARM ON TOP OF THE DOOR WHEN LOWERING HIS ARM FROM THE TOP OF THE DOOR A SHARP PIECE ON THE DOOR CUT HIS RIGHT WRIST. NEEDED 7 STITCHES

EMPLOYEE WAS CUTTING FLEXCO TAPE WITH RAZOR KNIFE, SLIPPED AND CUT FINGER. EMPLOYEE WAS TAKEN TOEMERGENCY ROOM AND RECEIVED FIVE STITCHES.

HIT HOLE IN ROAD, FELT PAIN IN LOWER BACK. NEVER SAID ANYTHING TO ANYONE ABOUT HURTING HIS BACK. ON 6-17-99 HE SAID HE COULD NOT GET OUT OF BED.

EE WAS LOADING SHOT ROCK WITH A HYDRAULIC FRONT SHOVEL. WHEN HE DROPPED A BUCKET FULL OF ROCK INTO THE BED OF A HAUL TRUCK A LARGE ROCK APPROX. 12"X6"X4" BOUNCED UP OUT OF THE TRUCK BED, CAME THROUGH THE SHOVEL'S WINDSHIELD(SHATTERING IT) &STRUK HIM ON HIS RIGHT KNEE.

WHILE STOCKING STONE IN VOLVO HAUL TRUCK, EE STEPPED OUT OF TRUCK AND SLIPPED ON STONE THAT WAS ON THE GROUND. HE LOST BALANCE AND FELL, HITTING KNEECAP AGAINST STEEL I BEAM THAT SUPPORTS THE PLANT.

VIBRATOR ON #8 LIME BIN BROKE LOOSE AND FELL OFFOF THE BIN. WE HAD JUST FINISHED SECURING THE VIBRATOR BACK ONTO THE BIN. THE POWER SOURCE WAS UNLOCKED AND THE VIBRATOR WAS TRIED. IT DID NOT W ORK. WE LOCKED THE POWER BACK OUT AND WENT UP TODETERMINE WHY IT DIDN'T WORK. EMPLOYEE WENT TO THE MAINTENANCE TRUCK FOR A SOCKET AND THEN STARTED UP TO BIN. HE SLIPPED AND FELL.

EE WAS WORKING ON CLEANUP AROUND PLANT. HE WALKED AROUND THE NORTH SIDE OF THE OLD PLANT CONTROLBLDG & SLIPPED ON SOME ICE. HE FELL & LANDED ON THE GROUND INJURING HIS BACK

EE WAS OPERATING AN ARTICULATING VOLVO TRUCK, HE SAID BOUNCING ON ROUGH GROUND AGGRAVATED HIS BACK.

EE WAS HELPING WELD DREDGE PIPE TOGETHER. HE WAS LIFTING A PIECE 12" DIA. 18" LONG AND PULLED A MUSCLE IN HIS BACK.

EE WAS STANDING IN THE BED OF THE R-25 TIGHTENING THE BOLTS HOLDING A BIN VIBRATOR ON. THE WRENCH SLIPPED OFF THE BNUT AND THE EE FELL BACKWARDS OVER A SMNALL PILE OF SCREENING IN THE TRUCK BE D. HE LANDED ON HIS LEFT SHOULDER, INJURING IT.

INJ WAS PULLING ON STARTER CORD ON SMALL GASOLINE ENGINE CORD SLIPPED OUT OF GRIP AND HANDLE STRUCK RING FINGER RIGHT HAND

WALKING UP STEPS TO HELP TIGHTEN BOLTS ON CRUSHER TRIPPED ON STEPS DROPPED WRENCH. WRENCH BOUNCED ON STEP STRIKING LEFT EYEBROW.

REINSTALLING ENGINE COVER ON RT-6 PINNER. SLIPPED AND FELL APPROX. TWO INCHES HITTING THUMB (BRUISED RIGHT THUMB).

AFTER FUELING EQUIPMENT EE SLIPPED OFF THE 980 CAT END LOADER HITTING ELBOW ON LOADER PLATFORM THEN CATCHING HIMSELF FROM FALLING ALL THE WAY DOWN WITH THE SAME ARM.

MAINTENANCE WORK ON CAT 980 LOADER STEPPING FROMTIRE TO STEPS LEFT ANKLE PULLED MUSCLE

EE WAS TIEING UP BARGES AT RIVER LOADOUT AREA OHIO RIVER MILE POST 234. HE HIT HIS LEFT ELBOW ON BARGE.

EE WAS PROPPING BIN DOOR HANDLE OPEN WITH A PIECE OF ROUND STOCK. HANDLE SLIPPED OFF OF ROUND STOCK STIRKING EE ON FOREHEAD.

WHILE SHOVELING MATERIAL FROM WASH PLANT, EMPLOYEE TURNED AND PULLED MUSCLES IN LEFT SHOULDER.

EMPLOYEE WAS SHOVELING SAND, CLEANING UP A FUEL SPILL.

THE EMPLOYEE WAS STEPPING DOWN OFF OF A CONVEYOR THAT WAS APPROX. 4 FT OFF THE GROUND AND LOST HIS FOOTING AND FELL OFF THE CONVEYOR. THE CONVEYOR WAS DE-ENERGIZED DURING THIS ACCIDENT. THE CO NVEYOR HE WAS ON HAD NO CATWALK AND WAS NOT MEANT TO BE A WALKWAY. AN ESTABLISHED LADDER WAS IN PLACE WHERE HE WAS WORKING AND HE CHOSE TO TAKE A SHORTER ROUTE.

EE WAS HELPING REMOVE STAIRWAY FROM PLANT AREA. A PIECE OF STEEL HIT HIS RIGHT THUMB AND BROKE IT.

EE WAS REPAIRING OUR SAND TANK (REPLACING STEEL PLATE IN SIDE OF TANK.). USING WELDING TOOLS INCLUDING A GRINDER, WHEN HE WENT TO THE DR'S THEY FOUND A PIECE OF METAL IN HIS LEFT EYE.

WHILE EMPLOYEE WAS HELPING WEDER ON PLANT CONST. EMPLOYEE RECIEVED MILD BURN TO EYES.

30X60 HEWITT ROBINS JAW CRUSHER HAD PLUGGED MACHINE WAS LOCKED OUT AND EE'S WERE DIGGING JAWCRUSHER OUT BY HAND, EE HAS A PINCHED NERVE OF PULLED MUSCLE.

EE WAS CARRYING PIECE OF STEEL UP A LADDER APPROX. 8' WHEN HE TWISTED HIS KNEE. CONDITION WAS DRY AND CLEAR OF DEBRIS.

HE WAS ASSISTING IN MOVING PIPE TO BE WELDED AND MUST HAVE LOOKED AT WRONG TIME.

WHILE HOISTING SECO PAN FEEDER INTO PLACE IN TUNNEL, CHAIN SLIPPED CAUSING EE TO LOOSE BALANCE. EE REACHED FOR A HAND HOLD PUTTING ENTIRE WEIGHT ON SHOULDER.

EMPLOYEE WAS USING A CUTTING TORCH CUTTING HOIST CABLE OFF OF DRAGLINE. WHEN A PIECE SLAG HIT HIM IN THE FACE GOING UNDER HIS SAFETY GLASSES AND HIT HIM IN THE EYE.

EE WAS PICKING MUD FROM MATERIAL COMING UP NO1 FOOD CONVEYOR WHEN HE SLIPPED AND TWISTED HIS BACK.

CHECKING ANTIFREEZE IN RADIATOR ON P & H CRANE. EE GOT ANTI FREEZE ON BOTTOM OF HIS BOOTS, SLIPPED AND FELL HITTING HIS LEFT LEG ON THE OUTRIGGER OF THE CRANE.

OPERATOR LOST HIS FOOTING WHILE EXITING CRAINE.

ALL POWER WAS DISCONNECTED. EMPLOYEE'S, BOTH MECHANICS, WERE REMOVING STEEL BEAMS FROM AROUND THE JAW CRUSHER SO THAT A CRANE COULD LIFT THE CRUSHER OFF THE PLANT THE FOLLOWING MORNING. AFTER CUTTING AN I BEAM LOOSE WITH A TORCH, INJURED TRIED TO ROLL THE BEAM OVER. THE BEAM FLIPPED UP &STRUCK HIM, THROWING HIM OFF BALANCE CAUSING HIMTO FALL. HE HAD CUT HEAD AND BRUISED LOWER BACK.

OUR MAINTENANCE MAN WAS WELDING AND INJURED STOPPED BY TO HAVE SOMETHING WELDED. HE WAS THERE APPROX. 10 MIN. THAT EVENING WHILE SLEEPNG HE NOTICED STRONG BURNING SENSATION IN EYES (FLASH BURN ). WENT TO EMERGENCY ROOM AND WAS TREATED ACCORDINGLY.

COMEALONG SLIPPED OFF WHILE PULLING SCREEN.

EE WAS ON JAW DISCHARGE BELT LOOKING FOR A PIECE OF METAL THAT WAS SEEN GOING INTO THE JAW CRUSHER. HE JUMPED DOWN OFF THE BELT ONTO THE CATWALK. WHEN HE LANDED ON THE CATWALK HE TWISTED HIS K NEE. THE BELT WAS SHUT OFF. THE DROP FROM THE BELT TO THE CATWALK IS 5'.

WELDING ON FIELD FEEDER HELMET FELL OFF HEAD.

EE WAS OPERATING DREDGE WHEN APPARENTLY A HYDRALIC LINE BLOWED AND STARTED FIRE. HE TRY TO EXTINGUISH FIRE BUT THERE WAS TO MUCH HE LEFT THE MACHINE.

FOREMAN AND EE WERE USING A HAMMER AND PINCH TO REMOVE TEETH ON DRAGLINE BUCKET, PIECE OF METAL WENT INTO EE S WRIST.

BELT SLIPPIN GTRY TO STOP GRAVEL COMING OUT OF CHUTE WITH SHOVEL AND HANDS.

CLIMB LADDER TO CHECK JAW LADDER SID AND MAN FELL.

CUT HOIST CABLE ON DRAGLINE TO GET WEDGE OUT AND SLIPPED, PUT HAND ON DRUM AND BURNT IT.

CONVEYOR STOPPED BECAUSE A ROCK WEDGED BETWEEN THE HEAD PULLEY AND THE CHUTE. EE SHUT OFF POWER, LOCED OUT CONTROL AND TREIED TO ROLL BELT IN REVERSE TO FREE THE WEDGED ROCK HIS FINGER WAS PIN CHED AGAINST SHEAVE.

WAS USING A DIE GRINDER ON A DRAGLINE DRUM A PIECE OF STONE HIT HIM IN EYE.

PUT BRAKE METHANOL IN DRAGLINE. SPLASHED INTO EYE.

STEPPED OFF TRACTOR TWISTED ANKLE.