Search the record

SOFT LAMINATED SHELL TOP.

SOFT LAMINATED SHELL TOP WITH WATER & 11/2FT RIDER SEAM

SOFT TOP WITH RIDER SEAM WE ARE IN LOW COVERAGE AREA. TOP FELL 8' HIGH 18' TO 25' WIDE 19' TO 21'LONG IN #5 ENTRY BK 180.

SOFT TOP WITH 2 RIDER SEAMS WITH ABOUT 100' COVERAGE LOW GAP IN MOUNTAIN.

CAUSE-SOFT,LAMINATED SHALE AND 2 RIDER SEAMS ABOVE ZONE OF 6'RESIN BOLTS.OCCURRED AT BRK 181 #5 ENTRY IN INTERSECTION.9'HIGH X 30'X 25'IN INTERSECTION.

LIFTING ON STEEL BEAM TO PLACE ON CRIBS.PULLED MUSCLE IN UPPER BACK BETWEEN SHOULDER BLADES.

CAUSE-SOFT LAMINATED SHALE WITH 2 RIDER SEAMS ABOVE ZONE OF 6'RESIN BOLTS.OCCURRED AT BRK #182-#6 ENTRY.8'HIGH X 40' X 40' IN INTERSECTION.

CAUSE-SOFT LAMINATED SHALE AND 2 RIDER SEAMS ABOVE ZONE OF 6'RESIN BOLTS.OCCURRED AT BRK #181 #7 ENTRY IN INTERSECTION. 9'HIGH X 30 X 20 IN INTERSECTION.

IN EARLY MAY EMPL BEGAN TO HAVE MEDICAL PROBLEMS WITH NECK & EARS & WAS TREATED FOR INNER EAR INFECTION. THIS PROBLEM CAUSED HIM TO USE 2 PERSONAL BUSINESS DAYS PLUS LEAVING EARY FOR DR'S APPT ON SEVERAL OCCASIONS. EMPL PREVIOUSLY RESCHEDULED TO WORK THROUGH REGULAR VACATION & TAKE OFF LATE BUT DECIDED TO TAKE VACATION IN HOPE THAT HIS PROBLEM WOULD CLEAR UP. HE STATED HE BUMPED HE

CREW SETTING BEAMS AT # 29 ON MAIN TRACK. 2 OF MEN MISHANDLES BEAM, CASUING IT TO ROLL OFF ONT EMP R. FT. STEEL BEAM WAS 6" 18'LONG . REC CUT AND BROKEN METALTARSUAL .

UNLOADING SUPPLIES ON ROOF BOLTER AND BACK STARTED HURTING TRIED TO CONT. WORK BUT PAIN BECAME TOO INTENSE COULDNT PINPOINT EXACT ACT. WHEN HURT BACK HOSPITALIZED 4-14-89 FOR PULLED MUSCLE NA D STAINED LIGAMENTS.

I.NAME DRILLING HOLES IN PIECE OF TUBING WHEN DRILL BECAME FOULED FORCING CLAMPS TO GIVE MASHING TIP OF FOREFINGER ON LEFT HAND BETWEEN DRILL PRESS AND TUBING.EMPL NOTIFIED US 3-27 WHEN FINGER BECAME INFECTED CAUSING MED.TREATMENT AND LOST TIME STARTING 3-27-89.

THE MINER CREW WAS MINING THE LAST LIFT IN A PILLAR BLOCK ON #1 SECT NAME WHO WAS THE MINVER HELPER BACKED UP WHEN A PIECE OF SLATE FELL OUT BETWEEN BOLTS ANDSTUCK NAME ON TOP OF HIS R FOOT RE SULTING IN BRUISES AND A LACERATION TO THE TOP AREA OF HIS FOOT

HE WAS CROSSING THE BELT POWER OFF TO GET SOME SUPPLIES FOR THE ELECTRICIANS HE JUMPED OFF THE BELT LINE AND LANDED ON UNEVEN BOTTOM RESULTING IN SPRAINED ANKLE WITH TORN LIGAMENTS #1 THIS ANK LE WAS WEAK FROM A PREVIOUS INJURY #2 THE NATURE OF THE BOTTOM WHERE HE JUMPED WAS UNDETECTABLE DUE TO APPROX 2" OF WATER IN THIS AREA

I.NAME WAS USING A CRESENT WRENCH TO TAKE OUT THE PLUGS IN THE SCOOP BATTERIES TO CHECK FOR WATER LEVELS THE WRENCH SLIPPED AND CAME IN CONTACT WITH THE FRAME AND LEADS CAUSING AN ARC RESULTI NG IN BURNS TO THE THUMBS AND WRIST AREA OF HIS HANDS

I NAME WAS INSTALLING A 4' ROOF BOLT WITH A PERCUSION DRILL THE PRESSUE INCREASED ON THE DRILL WHEN THE 2ND STAGE JACK ENGAGTE CAUSING THE DRILL TO SLIP AND BREAK THE SRENCH THE DRILL STEEL ST RUCK I NAME IN THE RIBS CAUSING HIM TO FALL AND HE HIT HIT HEAQD ON A ROCK RESULTING IN A LACERATION ON THE BAKC OF HIS HEAD

HE WAS HELPING TO MOVE THE MINER BACK AND STOOPED DOWN TO REACH TO MOVE A LOOP OF CABLE OUT OF THE WAY AND EXPERIENCED PAIN FROM LEFT SHOULDER BLADE DOWN HIS LOWER BACK.

I,NAME WAS HELPING THE SECTION FORMAN TIGHTEN UP THE BOLTS ON A PUMP ON HE CONTINUOUS MINER, WHEN A PIECE OF ROCK FELL OUT BETWEEN THE BOLTS AND STRUCK HIM ON THE HEAD, NECK & RIGHT SHOULDER. NO BROKEN BONES IN X-RAYS.

SOFT SHALE TOP/ TURNED LOOSE ABOVE ANCHORAGE ZONE. THIS WAS OUR #5 ENTRY / BREAK 21 APPROX. 2 MILE OUTBY THE WORKING SECTION. THIS AREA WAS DEVELOPED IN LATE JULY EARLY AUGUST 1981. NO EQUIPME NT OR PEOPLE WERE INVOLVED.

I,NAME WAS WALKING AROUND THE TOOL CAR, GATHERING PARTS & STEPPED ON THE TONGUE OF THE CAR AND SPRAINED HIS ANKLE.

CREW WAS WORKING WOOD OVERCAST AT FALL AND WERE STACKING CRIB BLOCKS UP ON OVERCAST WHICH WAS APPROX. 12 FT. HIGH. ONE OF THE CRIB BLOCKS ROLLED OFF THE OVERCAST STRIKING HIM ON THE HEAD- JAM MING HIS NECK.

I NAME HAD INSTALLED FIRST ROOF BOLT IN LAST ROW WHEN A PIECE OF MUD FELL FROM BETWEEN ROOF BOLTS AND RIB STRIKING HIM ON THE BACK OF THE NECK AND HEAD.

I.NAME HANGING LINE CURTAIN STANDING ON 8'STEP LADDER.COAL HEIGHT 10'.EXPERIENCING DIFFICULTY AND WAS AWAITING HELP WHEN LADDER GAVE WAY CAUSING HIM TO FALL.TRIED TO CATCH WITH RIGHT ARM AND JAMMED -STOVED RIGHT SHOULDER.

HE MISSED A LOST TIME DAY ON 3-3-88. AS A RESULT OF THE INJURY WHICH OCCURRED ON 1-14-88 AND REPOTRED ON 1-26-88. HE IS STILL UNDER DOCTORS CARE FOR LUMOSOCRAL STRAIN.

I.NAME WAS ATTE4PTING TO PULL DOWN A PIECE OF DRAY SLATE 3 FT 3 IN WITH A SLATE BAR AND EVIDENTLY OVER STRETCHED TO PERFORM THE TASK HE WAS STANDING ON THE BOOM OF THE ROOF BOLTER DUE TO EXC ESSIVE HEIGHT T2 MAKE USE OF THE PROTECTIVE CANOPY

I.NAME WAS POSI7IONING A ROOF STRAP ON ROOF BOLTING MACHINE WHILE SWINGING ROOF STRAP OVER TO THE OTHER OPERATOR HE FELT A SHARP PAIN IN HIS LOWER BACK

I NAME WAS STAN8ING ON TOP OF THE CONTINUOUS MINER TO ADVANCE THE LINE CURTAIN WHEN HE LIFTED UP ON THE CURTAIN HE FELT PAIN IN HIS LOWER BACK HE DID NOT REPORT TO A DR UNTIL 1 30 88 AND WAS DIAGNOSIED AS M6SCLE STRAIN THIS ALLEGED ACCIDENT 13 BEING QUESTIONED BY THE COM THAT WV COMP.

THE INJURED WAS3PULLING A HINGE PIN OUT OF A BELT SPLICE DURING A BELT MOVE AND EXPERIENCED PAIN IN THE STOMACH AREA.DOCTOR DIAGNOSED THE PROBLEM AS A HERNIA IN THE NAVEL AREA ON 01-04-88.

I.NAME TRANSPOR7ING BELT TRAINING ROLLERS ON BELTLINE BY USING ROLLER DOLLY.1 TRAINING ROLLER SLID OVER LACERATED BACK OF RIGHT THUMB.