Search the record

WALKING TO MAN BUS FEET SLIPPED OUT FROM UNDER HIM AND CAME DOWN ON HIS BACK.

EE WAS TRAMMING A 3 WHEELER FROM END OF TRACK TO THE SECTION WHEN THE STEERING WHEEL SPUN AROUND AND STRUCK EE'S RT ARM, CAUSING A BRUISE.

EE WAS OPERATING A CONTINOUS MINER, WHEN A PIECE OF DRAW ROCK FELL OUT FROM BETWEEN THE ROOF BOLTS AND CUT EE'S HAND THAT REQUIRED STITCHES.

EE WAS LIFINT ON A PRY BAR TO RAISE BELTLINE HADPAIN IN BACK

EE WAS ON HIS KNEES LOADING SUPPLIES ONTO ROOF BOLTER. EE STOOD UP & LEFT KNEE POPPED RESULTING IN A TORN CARTILAGE.

STARTED TO CHANGE SEATS AND DRAW ROCK FELL AND HIT HIM ON HIS HAND AND CUT 1 FINGER.

EE WAS ENROUTE TO ROOF BOLTER WHEN HE WALKED INTO A BROKEN STRAP CVAUSING A LACERATION ON HIS NECK.

EE WAS OPERATING A REMOTE CONTROL CONTINUOUS MINER WHEN A PIECE OF DRAW ROCK FELL FROM BETWEEN BOLTS AND HIT EE ON HEAD & LANDED ON HANDS CAUSING LACERATION ON HANDS THAT REQUIRED STITCHES.

EE WAS OPERATING A CONTINUOUS MINER WHEN A PIECE OF DRAW ROCK FELL BETWEEN ROOF BOLTS STRIKING EE ON WRIST, CAUSING A LACERATION.

EE WAS PULLING MINER CABLE WHEN HIS FOOT BECAME ENTANGLED IN A LOOP OF CABLE. HE STUMBLED AND FELL, THIS ANKLE HAS BEEN BROKEN BEFORE.

CHANGING BITS ON THE MINER LEFT ELBOW CAME AROUND AND HIT ONE OF THE BITS.

WHILE CLEANING OUT ROCK DUSTER, GOT FINGER CUT ON AUGER.

REMOVING SCRAPPER FROM BELT HEAD, WHILE REMOVING SCRAPPER FROM #3 BELT HEAD, SCRAPER FELL & HIT HAND.

THE ROOF OF THIS MINE HAS A HISTORY OF LOOSE DDRAW ROCK. VISUAL INSPECTION WAS DONE BEFORE BOLTING THE AREA BEGAN, BUT THE ROOF WAS NOT TESTED BY SOUNDING. A PIECE OF ROCK BROKE LOOSE WHILE VICTIM WAS DRILLING A BOLT HOLE. THE ROCK STRUCK THE VICTIM IN THE FACE AND BODY, CUTTING HIS FACE AND LEG.

EMPLOYEE WAS PINNING TOP HAD PIN LAYING ON BOTTOM LAID RT LEG ON PIN PLATE & CUT LEG

WHILE BOLTING TOP ON 002 SECTION, LEFT CROSS CUT OFF #1 ENTRY, EE'S GLOVE GOT CAUGHT ON ROOF BOLT, TWISTING GLOVE OFF HAND AND INJURING TWO FINGERS.

EMPLOYEE WAS BOLTING TOP, A PIECE OF ROCK FELL FROM TOP STRIKING HIS RIGHT HAND.

WHILE INSTALLING 2ND BOLT IN1ST ROW DRAW ROCK FELL OFF RIB & HIT EE IN LOWER LEFT BACK

EMPLOYEE WAS BOLTING TOP ON OFFSIDE OF FLETCHER DOUBLEHEAD BOLTER, HE RAISED AND TURNED QUICKLY, HITTING HIS FORHEAD ON THE BOLTER CANOPY PROTECTING HIM.

HAD A ROOF FALL IN THE MAIN RETURN AT SPAD T499, FELL 4 INCH USING 4 FT BOLT CONV FELL 30X20FT IN AN INTERSECTION DIDNOT AFFECT VENT WAS APPROX. 1700 OFF THE SECTION.

HAD A ROOF FALL IN THE MAIN INTAKE AT SPAD U145 AND U146 ONE BRK INBY FELL APPROX. 150 FT LONG X 20 FT WIDE ABOUT 4 FT HIGH WAS USING 36INCH CONV BOLTS APPROX. WAS MINED ABOUT 12-1-93. DID NOT AFFECT VENT WAS APPROX. 2400 OFF THE 002 SECTION.

WHILE BOLTING TOP RIB ROLLED IN #4 ENTRY WHILE INSTALLING 1ST BOLT IN 2ND ROW & STRUCK EMPLOYEES BACK.

WHILE ATTEMPTING TO STAND UP FROM KNEELING POSITION, EMPLOYEE SLIPPED & FELL ON LEFT KNEE.

PULLING LOADER CABLE, STRAINED LOWER STOMACH.

INJURED EE WAS REMOVING A LARGE PIECE OF ROCK FROM THE NO. 4 BELTLINE WHEN HE STRAINED HIS LOWER BACK.

WHILE BOLTING #7 ENTRY A PIECE OF DRAW ROCK FELL AND STRUCK EMPLOYEE ON SHOULDER.

ROOF BOLTER OPERATOR WAS SITTING IN DECK UNDER CANOPY, LOOSE PIECE OF ROCK FELL OUT FROM BETWEEN BOLTS AND STRUCK LOWER PART OF LEG.

LOOSE CORNER OF COAL POPPED OFF WHERE EE WAS INJURED BACK.

AN UNINTENTIONAL ROOF FALL OCCURRE DIN THE #$ ENTRY EXTENDING THROUGH THE CROSSCUT TO #5 ENTRY MEASURING APPROX 50'LX20'FX60'H. DUE TO ASEPARTION OF THE ROOF STRATE ABOVE LENGTH OF ROOF BOLTS USED 48' RESIN.

OPER DROVE MACHINE WENT AROUND TO TACK UP LOOSE CURTAIN MACHINE MOVED INJ STRUCK ON LEG BY MACHINE

ROOF FALL OCCURRED NO.4 ENTRY DUE TO LAMINATED SLATE ROOF SEPARATING AND FALLING ABOVE ROOF SUPPORTS,MEASURING 20'W X 20'L X 6'HIGH.

ROOF FALL OCCURRED IN THE NO. 4 ENTRY AT SPAD NO. G-310 APPROXIMATELY 5000 FT OUTBY 001 SECTION DUE TO FAULTY LAMINATED STRATA IN AREA NEAR PREVIOUS ROOF FALL MEASURING APPROXIMATELY 20 FT. L X 20 FT. W X 4 FT. H. AREA PREVIOUSLY SUPPORTED BY 48 IN. RESIN BOLTS.

FAULT AREA IN MINE WHERE ROOF PROBLEMS PREVIOUSLY OCCURRED.A CONTINUATION OF FALL IN #5 ENTRY AT SURVEY STA G-315 DUE TO SOFT AND BROKEN STRATA MEASURING 20'W X 20'L X 6'THICK.

EMPLOYEE WAS PRYING UP ON LOADING MACHINE PANEL COVER WITH SCREWDRIVER WHEN SCREWDRIVER BROKE AND PIECE OF IT EMBEDDED IN HIS UPPER LIP.

EMPL WAS INSTALLING ROOF BOLTS IN NO 6 HEADIN G CROSSCUT LEFT WHEN DRILL STEEL BENT STRIKING HIMON LEFT LOWER ARM RESULTING IN FRACTURE.

ADVERSE ROOF STRATA IN AREA,ROOF FALL OCCURRED MEASURING 6'L X 18'W X 4-8'HIGH IN NO6 ENTRY AT SURVEY STA H-349 EXTENDING INBY.AREA IS 1380'OUTBY FACE.AREA DEVELOPED 8-10-89 SUPPORTED BY 36" C ONV.BOLTS & CRIBS.

SHOT FIRE SHOOTING SHOT, PIECE OF ROCK FELL ON RIGHT HAND AND SHOOTING BATTERY.

I NAME WAS LOADING SUPPLIES ON ROOF BOLTER & INJURED BACK

WEAK LAMINATED STRATA SEPERATED & COLLAPSED IN #8 ENTRY APROXIMATELY 500' OUTBY WORKING SECTION MEASURING APPROXIMATELY 350' LX 20' W X 6-7' H.

WEAK LAMINATED ROOF STRATA SEPARATED ABOVE THE ROOF BOLTS COLLAPSED MEASURING APPROX. 30 FT L X 30 FT W X 6-8 FT L. AND APPROX. 900 FEET OUTBY WORKING SECTION IN NO.6 ENTRY.

WEAK LAMINATED ROOF STRATA SEPARATED ABOVE THE ROOF BOLTS & COLLAPSED MEASURING APPROX 420FTLX20FTWX6-8FL IN THE NO 1 ENTRY & APPROX 850FT OUTBY WORKING SECTION

I NAME WAS UNLOADING SUPPLIES AT END OF TRACK IN #6 ENTRY AND INJURED MIDDLE AND RING FINGERS ON L HAND