Mining Incidents

Hoisting

Every reportable mining accident MSHA has classified under Hoisting. Fatalities and serious injuries are the bulk of these records; some categories also include reportable non-injury events.

Track this category? Subscribe to the hoisting fatality RSS feed — every new MSHA fatality classified as hoisting, delivered to your reader as soon as it's filed.

Fatalities recorded
13
Total incidents
5,362
Of which fatal
0%

Operators with the most hoisting fatalities

  1. 01Newtown Energy Inc1fatal
  2. 02Newmont USA Limited1fatal
  3. 03Amrize Cement Inc.1fatal

Recent hoisting fatalities

Caught in, under or between a moving and a stationary object

Employee received crushing fatal injuries while assisting MSHA inspection of elevator inside of Preparation Plant.

Caught in, under or between running or meshing objects

A contractor was servicing the Alimak elevator at the fourth level of the pre-heater tower. The contractor was on top of the elevator and a mine employee was inside the elevator assisting. The person inside the elevator heard a clicking sound and the elevator started a downward descent. The contractor on top of the elevator received crushing injuries when the elevator moved.

Fall from machine

An employee, assisting with shovel maintenance, entered the man lift at the shovel house level to descend and retrieve a needed part. After entering the man lift, the support arm broke, causing the basket and employee to fall to the ground. An investigation is ongoing. Amendment: Employee passed away 6/27/19.

Struck against stationary object

The employee was fatally injured when he was travelling on a shaft conveyance and came in contact with the shaft furnishings.

Caught in, under or between a moving and a stationary object

Two shaft repairmen had finished pulling lacing from the pipe compartment, the all clear/tucked in verbal command was given twice with response. The bell signal was transmitted to raise the skip. One miner's fall protection lanyard was accidentally left connected to a shaft anchor. As the skip raised the lanyard remained secured pulling the miner between the skip and shaft timber.

Caught in, under or between a moving and a stationary object

Scoop operator placed the scoop bucket over the edge of the elevator/hoist to eject a trash insert. Inadvertent movement of the elevator/hoist raised the scoop upward and the scoop operator ended up under the scoop deck suffering fatal injuries.

Struck by... (Not Elsewhere Classified)

Two employees were struck by the boom of the pivoting hoist. At this point in the investigation, it appears that the boom or boom hoist ropes came in contact with an adjacent structure as the boom was being lowered. The elevation of the boom changed suddenly as the boom hoist rope or boom lost contact with the structure, striking both individuals.

Struck by powered moving object

Hoisting accident, still under investigation.

Caught in, under or between a moving and a stationary object

INDIVIDUAL WAS MASHED BETWEEN AN ELEVATOR AND THE STRUCTURAL STEEL ON LEVEL L-3 PREHEATER TOWER.

Struck by rolling or sliding object

WHILE PREPARING TO ATTACH ROCKDUST HOSE TO POD DUSTER, THE DUSTER WAS STRUCK BY 3 SUPPLY CARS WHICH HAD BROKEN LOOSE FROM THE SLOPE CAR AT THE TOP OF THE SLOPE. CARS STRUCK THE DUSTER & THE VI CTIM WAS FATALY INJURED. THE CARS TRAVELED APPROXIMATELY 1700 FT. BEFORE STRIKING THE ROCKDUSTER. CAUSE OF THE CARS BREAKING LOOSE IS STILL UNDETERMINED.

Struck against a moving object

THE VICTIMS WERE ENROUTE 633' DOWN THE SLOPE TO BEGIN DRILLING TO INJECT POLYURETHANE INTO THE SLOPE ROOF WHEN THE RAIL MOUNTED HOIST OPERATED MANTRIP RAN AWAY RESULTING IN 2 FATALITIES

Struck against a moving object

THE VICTIMS WERE ENROUTE 633' DOWN THE SLOPE TO BEGIN DRILLING TO INJECT POLYURETHANE INTO THE SLOPE ROOF WHEN THE RAIL MOUNTED HOIST OPERATED MANTRIP RANAWAY RESULTING IN 2 FATALITIES

Caught in, under or between a moving and a stationary object

THE EMPLOYEE WAS WORKING FROM THE GALLOWAY WORK PLATFORM IN THE BOTTOM OF THE RODEO VENTILATION SHAFT. THEY HAD JUST FINISHED LOADING AND WIRING IN THE BLAST FOR THE END OF SHIFT. THE ORE BU CKET HAD BEEN CALLED FOR SO THAT THE CREW COULD RIDE BACK OUT TO THE COLLAR FOR THE BLAST TIME AND SHIFT END. AS THE ORE BUCKET ENTERED THE BUCKET WELL OF THE GALLOWAY, THE EMPLOYEE LEANED OV

Source: US Mine Safety and Health Administration (MSHA) accident records, kept current weekly. Classification labels are MSHA's own coding.