Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
INJURED WAS CLEANING RAILROAD CARS NEAR LOADOUT FACILITY PUTTING UP DOOR WITH SLATE BAR BAR SLIPPED OUT OF LATCH ALLOWING INJURED TO FALL TO THE GROUND SLATE BAR FOLLOWED STRIKING INJURED IN H EAD (SMALL LACERATION OFTHE SCALP)
EMPLOYWW WAS HELPING REPAIR THE CONTINUOUS MIENR IN THE FACE AREA OF THE #4 ENTRY OF THE 2 SOUTH SECTION, MMU #001-0. WHILE PLACING THE RUB RAIL ON THE MINER, THE RAIL SLIPPED OUT OF HIS HAND AND STRUCK HIS LEFT FOOT FRACTURING IT.
EMPLOYEE WAS PUTTING WHEEL OF ROOF BOLTING MACHINE IN THE #4 ENTRY TWO BREAKS OUTBY THE FACE, ON THE 2 NORTH SECTION, MMU #001-0. AS HE WAS TIGHTENING THE LUG NUTS ON THE WHEEL, THE WRENCH SL IPPED, CAUSING HIM TO FALL. THE PRESSURE AND WEIGHT OF HIS BODY CAUSED FRACTURES TO HIS RIGHT FOOT 2 BONE. THIS ACCIDENT WAS UNDER EXTENSIVE INVESTIGATION AND WAS JUST COMPLETED.
EMPLOYEE WAS WATCHING THE REPAIRMEN, REPAIRING CONTINUOUS MINER CONVEYOR CHAIN, IN THE FACE OF #2 ENTRY OF THE 1 NORTH MAIN SECTION, MMU #004-0. AS THE REPAIRMAN WAS BEATING THE CHAIN LINKS BA CK TOGETHER WITH A HAMMER, SOMETHING FLEW INTO EMPLOYEE'S RIGHT EYE. EMPLOYEE RECEIVED EYE MEDICATION.
EMPLOYEE WAS CUTTING 3/8" ROPE (CABLE0 WITH A HATCHET,NEAR THE #4 BELT TAILPIECE OF THE 2 SOUTH PAR SECTION,MMU #001-0.WHEN HE HIT THE CABLE WITH THE HATCHET,IT SLIPPED AND HIT HIS LEFT AHND,C UTTING HIS LEFT INDEX FINGER.EMPLOYEE RECEIVED TWO STITCHES IN HIS FINGER.NOTE THIS ACCIDENT REPORT WAS RECIEIVED 01-21-91,AN EXTENSIVE INVESTIGATION WAS CONDUCTED.
EMLOYEE WAS KNOCKING SOME WELDING SLAG OFF OF A SHUTTLE CAR CANOPY LEG, IN THE #3 ENTRY ROADWAY OF HTE 2 LEFT OFF TURKEY MAINS SECTION, MMU #005-0. AFTER WELDING THE CANOPY LEG OF THE SHUTTLE CAR HE KNOCKED THE SLAG OFF THE LEG. A PIECE OF THE SLAG STRUCK HIM IN THE RIGHT EYE. RECEIVED EYE DROPS FROM DOCTOR.
EMPLOYEE WAS CUTTING A PIECE OF CONVEYOR BELT TO MAKE FENDERS FOR SHUTTLE CARS NEAR THE ROSCOE BELT FEEDER OF THE 2 NORTH SECTION, MMU # 001-0. AS HE WAS CUTTING THE PIECE OF BELT WITH A KNIFE , THE KNIFE SLIPPED AND CUT HIS LITTLE FINGER OF HIS RIGHT HAND.
EMPL REPAIRING ROOF BOLTING MACHINE IN #3 ENTRY FACE AREA OF 2ND LEFT OFF TURKEY MAINS SECTION,MMU 005-0.CUTTING OFF END OF WATER HOSE,TO USE FOR SUCTION HOSE ON MACHINE.HACKSAW BLADE CUT THRO UGH HOSE AND CUT END OF EMPL INDEX FINGER ON LEFT HAND.RECD 5 STITCHES IN FINGER.
EMPL WAS HELPING SET TAILPIECE ON 2 NORTH SECTION ID #001-0. EMPL WAS USING JACK TO PUSH TAILPIECE & BAR HANDLE SLIPPED OUT & STRUCK EMPL ON RIGHT LEG BELOW KNEE CASUING HAIRLINE FRACUTRE. DAT E OF ACCIDENT 9/01 FOREMAN FILLED OUT 9/06 RECEIVED SAFETY DEPARTMENT 9/07.
EMPLOYEE WAS SPLICING A CABLE IN THE FACE AREA (#3 ENTRY) OF THE 2 NORTH SECTION,MMU 001-0.AS HE WAS CUTTING THE OUTER CASING OF THE CABLE WITH A HAWK-BILL KNIFE HE SLIPPED AND CUT HIS RIGHT T HUMB.EMPLOYEE DID RECEIVE STITCHES IN HIS THUMB.
EMPLOYEE WAS SPLICING CONVEYOR BELT NEAR THE BELT DRIVE OF THE 2ND LEFT OFF TURKEY MAINS SECTION.MMU #005-0.AS HE WAS WORKING ON THE SPLICE,ONE OF THE BELT CLAMPS SLIPPED LOOSE AND STRUCK HIM ON THE LEFT SIDE OF THE HEAD,INJURING AND CUTTING HIS LEFT EAR.
EMPLOYEE WAS PULLING ON A PIECE OF FOLDED BELT AT THE LEATHERWOOD MAINS TRACK SWITCH AS HE WAS PULLING TO UNFOLD THE PIECE OF BELT HIS CHANNEL-LOCKS SLIPPED OFF THE BELT CAUSING HIM TO FALL BA CKWARDS ACROSS THE TRACK RAIL BRUISING HIS BACK
INJURED WAS USING A CHAIN TO HELP PULL A LONGWALL SHIELD.THE CHAIN BROKE AND HIT INJURED ON HIS LEFT ANKLE.
TIGHTENING A BOLT IN A STEEL BACE WITH AN ADJUSTABLE WRENCH. THE WRENCH SLIPPED OFF NUT AND HE HIT HIS LEFT THUMB ON THE STEEL BRACE.
INJURED WAS HAMMERING A SPROCKET ON A TAIL SHAFT, AND A PIECE OF STEEL CHIPPED FROM THE HAMMER AND BECAME LODGED IN INJURIES LEFT ARM.
TIGHTENING WEDGE STUCK R THUMB
INJURED WAS USING A KNIFE TO CUT A SCRAP PIECE OF CABLE AND THE KNIFE SLIPPED CUTTING HIS RIGHT LEG. NOTE-RECEIVED 5 SUTURES TO RIGHT LEG.
TIEING CHOKERS AROUND BEAMS AND HOISTING THEM TO A FLOOR ABOVE TURNED ONE OF THESE BEAMS OVER ON R FOOT
EMPLOYEE WAS SETTING BITS IN CONTINUOUS MINER IN THE #3 ENTRY OF THE 2 NORTH MAIN SECTION, I.D. #001-0. AS HE STRUCK ONE OF THE BITS A PIECE OF METAL STRUCK HIM IN THE LEFT EYE.
INJURED WAS REMOVING A PUMP HOUSING & WAS PRYINGAGAINST THE HOUSING WITH A BAR WHEN HE FELT PAIN IN HIS LEFT SIDE AREA NOTE INJUEFRD TOLD THE CO.ON 032890 OF THE DOC.DIAGNOSIS & SAID HE WOULD PROBABLY NEED SURGERY EVENTUALLY (INJURED HAS NOT MISSED ANY WORK TO DATE 03-28-90
EMPLOYEE WAS REPLACING THE DRIVELINE ON THE CONTINUOUS MINER, USING A WRENCH. THE WRENCH SLIPPED AND CAUSED EMPLOYEE TO HIT THE MINER FRAME WITH HIS RIGHT ARM, JUST BELOW THE ELBOW, CAUSING BR UISES TO IS RIGHT ARM. (2 SOUTH PARALLEL SECTION, ID #001-0).
USING COME A LONG TO PULL CONVEY TWISED NECK L ARM AND L SHOULDER
INJURED WAS USING SET OF COMEALONGS CM PULLER TO PULL TAIL ROLLER. HOOK FOR COM PULLER SLIPPED OFF TAIL ROLLER STRIKING INJURED ON FACE. RECEIVED TWO SUTURES.
EMPLOYEE WAS CHANGING A TIRE ON THE EIMCO SCOOP IN THE #4 ENTRY AT THE END OF THE TRACK OF THE 1 NORTH MAIN SECTION, I.D.004-0. AS HE WAS PUTTING THE TIRE BACK ON THE SCOOP, USING A PRY BAR, T HE BAR SLIPPED AND STRUCK EMPLOYEE ON THE UPPER LIP, CUTTING IT. EMPLOYEE RECEIVED STITCHES IN HIS UPPER LIP, NOT SURE HOW MANY.
INJURED WAS USING AN AIR IMPACT WRENCH AND WHEN HE TURNED THE WRENCH ON IT BLEW DUST AND OTHER FOREIGN OBJECTS INTO HIS RIGHT EYE.
EMPLOYEE WAS PUTTING GRAVELS ON TRACK OF THE TURKEY MAINS SECTION ID #001-0 AS HE WAS LOWERING DOOR OF GRAVEL CAR USING A SMALL METAL BAR THE DOOR DROPPED SUDDENLY FLIPPING THE BAR BAR WAS THR OWN AGAINST THE MINE ROOF THEN STRUCK EMPLOYEE ON LEFT SIDE OF HIS HEADCUTTING HIS HEAD & EAR EMPLOYEE RECEIVED 9 STITCHES IN HIS HEAD & EAR
INJURED WAS TIGHTENING BOLTS ON A CONVEYOR BELT TAKE-UP AND PULL TOO HARD WITH WRENCH STRAINING HIS LOWER BACK.
INJ USING HAMMER TO KNOCK BELT STRUCTURE PIN IN PLACE ,SMALL PIECE OF PIN BROKE OFF,STRUCK INJURED ON LEFT FOREARM.
EMPL WAS REPARING SHUTTLE CAR IN #4 ENTRY OF 2 SOUTH PARALLEL SECTION ID #001-0. AS HE WAS TIGHTENING BOLTS OF WHEEL UNIT WRENCH SLIPPED CASUING HIM TO FALL. PRESSURE & WEIGHT OF BODY CAUSED F RACTURES TO RIGHT LOWER LEG. '
INJURED WAS USING A LIFTING JACK TO JACK A MOTOR BACK ON TRACK AND THE JACK SLIPPED STRIKING INJURED IN MOUTH.NOTE-NO DAYS WERE MISSED DUE TO ACCIDENT.INJURED FIRST VISITED A DOCTOR ON O6-01-9 0.DUE TO HIS LOOSENING THREE LOWER FRONT TEETH O6-01-90.ACCIDENT NOT REPORTABLE UNTIL THIS TIME.
INJURED WAS HELPING PUT DERAILED TRACK JEEP BACK ON TRACK WITH LIFTING JACK. WHEN THE JEEP WAS RAISED THE JACK SLIPPED OUT STRIKING A HEADER BOARD WHICH BOUNCED UP STRIKING INJURED ON FACE AND NOSE.
INJURED WAS HELPING CO WORKER PUT CONTINOUS MINER CONVEYOR CHAIN BACK ON FOOT SHAFT. HIS CO WORKER HIT THE CHAIN WITH A HAMMER CAUSING A PIECE OF STEEL TO CHIP OFF STRIKING INJURED ABOVE RIGHT EYE. THE ACCIDENT OCCURRED ON 1-9-90 AND WAS NOT REPORTABLE ON 1-22-90 INJURED HAD TO HAVE OUT PATIENT SURGERY DUE TO COMPLICATIONS OF THE ACCIDENT.
CONVEYOR CHAIN WRECKED OFF SPROKET AND TRACK,INJ USING SET OF COME-ALONGS TO PUT CHAIN BACK ON TRACK.THE HOOK SLIPPED OFF STRIKING INJ ON LEFT THUMB.
JACKING UP ROCKDUSTER TO PUT BACK ON TRACK, WHEN DUSTER FELL, THROWING BACK OUT FROM UNDER DUSTER, STRICKING INJURED ON HIS RIGHT SIDE.
INJURED WAS HELPING CO WORKERS UN ROLL A NEW ROLL OF CONVEYOR BELT. THE BELT CLAMP THAT WAS BEING USED TO PULL THE BELT SLIPPED OFF STRICKING INJURED ON FACE.
INJ USING WRENCH TO TIGHTEN BOLT.WRENCH SLIPPED CAUSING INJ TO BUMP RIGHT ELBOW.
EMPL WAS STRAIGHTENING BELT ROLLERS ON #3 BELT OF SOUTHSIDE PARALLEL SECTION ID #011-0. AS HE LOOSENED BOLT ON PIECE OF BELT STRUCTUE STRUCTURE SLID & CAUGHT RIGHT THUMB MASHING IT BETWEEN BEL T STRUCTURE & BELT ROPE.
HE WAS USING A PIECE OF DRILL STEEL TO PRY A ROCK LOOSE WHEN HE STRAINED THE MUSCLES IN HIS ABDOMEN.
I,NAME STATED HE WAS TIGHTENING BELT CLAMPS ON THE SIDE OF THE BELT SHEN THE CLAMPS SLIPPED AND STRUCK HIM ON THE RIGHT ELBOW AND BRUISED IT.
TWO EMPLOYEES WERE HAULING STEEL IN FROMT EH FIELD USING A BOOMTRUCK. A BEAM TO BE UNLOADED WAS ATTACHED TO THE BLOCK/HOOK W/ASLING WHEN IT HIFTED ADN ROLLED ONTO THE LEFT FOOT OF INJURED.
INJURED WAS JACKING BELT TAILPIECE WITH A BELT JACK AND THE JACK SLIPPED OUT STRIKING INJURED ABOVE HIS LEFT EYE.
INJURED WAS JACKING BELT RAILS UP, WHEN THE JACK SLIPPED OUT, CATCHING HIS THUMB BETWEEN JACK AND BELT RAILS RESULTING IN 5 STITCHES TO HIS LEFT THUMB.
WORKING ON BRACKET PUTTING ON NEW BOLTS, WHEN A PIECE OF METAL WENT INTO RIGHT EYE.
INJURED WAS USING A HAMMER TO BEAT AND REMOVE SHELVES FROM A SPEED REDUCER AND RECEIVED DAMAGE TO HIS LEFT EAR DRUM FROM THE PROCESS OF BEATING THE SHEEVES.
EMPLOYEE WAS USING A CHISEL AND HAMMER TO CUT A WIRE ROPE. WHILE STRIKING THE CHISEL, EITHER A PIECE OF THE HAMMER, CHISEL OR WIRE STRUCK HIM IN THE LEFT FOREARM.
INJURED WAS HELPING CLEAN UP RIB ROLL. ONE OF THE OTHER WORKERS WAS USING AN AXE TO BUST SOME OF THE COAL AND THE AXE SLIPPED OUT OF HIS HANDS STRIKING INJURED ON HIS RIGHT THIGH AND HIP AREA.
HELPIGN SPLICE CONVEY CHAIN FOR CONT MINER IN 3 ENTRY OF 002 0 HOLDING HAMMER FOR OTHER EMP TO HIT HAMMER SLIPPED HIT R MIDDLE FINGER FRA CTURING IT
INJURED WAS SHOVELING BELT AND BUMPED HIS LEFT ARM AGAINST BELT RAIL STRUCTURE.
EMPLOYEE WAS REPAIRING THE #49 BLOWER IN THE PREP PLANT.AS HE WAS USING A HAMMER AND CHISEL,A PIECE OF THE CHISEL CHIPPED OFF AND STRUCK IN HIS RIGHT ARM.EMPLOYEE HAD TO GO INTO HOSPITAL TO HA VE METAL REMOVED FROM HIS ARM BECAUSE OF BLOOD THINNING MEDICATION HE HAD BEEN TAKING.
EMPL WAS SPLICING BELT CONTROL CABLE ON #2 BELTLINE LEADING TO 7 SOUTH SECTION ID#005-0. AS HE WAS USING POCKET KNIFE TO CUT INSULATION OFF CABLE KNIFE SLIPPED & HIT RIGHT INDEX FINGER CUTTING IT. EMPL RECEIVED MEDICATION & SIX STITCHES..