Handtools (Nonpowered)

Employee was removing an electrical motor using a chain hoist suspended from a cross brace when the cross brace became unsecured and struck the employee.

Employee was working on a crusher. A bucket tooth was wedged in the crusher. The crusher was jacked up. The jack kicked out and employee was struck in the head by an unknown object and knocked him into the bed of the truck where he struck his head on an unknown object. Employee received head trauma.

The truck owner was replacing a bolt in a pony axle. The owner had a bottle jack under one axle tire and a wooden block under the axle tire beside it. The owner then lowered the axles from the cab, positioned himself on a creeper between the 2 raised axle tires. The jack came out from under one axle tire; crushing the owner.

A FATAL ACCIDENT OCCURRED AT THIS OPERATION WHEN A STEEL PLATE FELL FROM A JAW CRUSHER STRIKING AN EE WHO WAS WORKING BELOW.

EE AND ANOTHER EE WERE DOING MAINTENANCE ON UG AIR SYSTEM WHEN A 4" AIR HOSE APPARENTLY BROKE LOOSE, HITTING EE IN HIS BACK OF HEAD.

EE HAD GONE UP TO THE CRUSHER AND SHUT OFF JAW, BECAUSE A ROCK HAD BECOME STUCK. HE WAS HITTING THE ROCK WITH A SLEDGE HAMMER. WHAT HAPPENED NEXT IS NOT FOR SURE AS NO ONE SAW IT AT FIRST, BUT WHEN HE HIT THE ROCK, THE SLEDGE MUST HAVE GLANCED OFF, THE SLEDGE HAMMER CAME BACK WITH FORCE, HITTING EE IN THE HEAD, WHICH CAUSED HIM TO FALL BACK OVER TO GROUND. HAMMER DID INJURY NOT FAL

A DELIVERY TRUCK DRIVER WAS FATALLY INJURED WHILE UNLOADING A LOAD OF 18" BY 50' PVC PIPE FROM A FLATBED TRAILER. WHEN HE CUT A ROPE SECURING THE PIPE ON THE TRAILER, THE PIPE ROLLED OFF AND C RUSHED HIM.

EMP WAS REPLACING REAR TIRE ON 988A CAT WHEEL LOADER. FENDER WAS HELD IN UPRIGHT POSITION WITH CAHIN COME A LONG. APPARENTLY CONE A LONG BROKE LETTING FENDER FALL AND FENDER STRIKING EMP ON TH E HEAD.

EMPLOYEE WAS INSTALLING A BOOM TO A BELT DRIVE, WHEN A CHAIN HOIST (1 1/2 TON HARRINGTON) , CHAIN BROKE CAUSING BOOM TO SHIFT TOWARD DRIVE ROLLERS, STRIKING EMPLOYEE ACROSS BACK AND RIDING HIM DOWN, RESULTING IN A FATAL INJURY.

EMP WAS FATALLY INJURED FROM CRUSHING INJURY TO UPPER TORSO. LOADER BUCKET WAS POSTIIONED TO THEDUMP POSITION AND LOWERED TO THE GROUND. THE BUCKET SHIFTED AFT, CAUSING THE LIFTING LINGAGE MEC HANISM TO SHIFT AFT. THIS ACTION PINNED THE EMP AGAINST THE FRONT FRAME AND DIFFERENTIAL.

THE VICTIM RECEIVED FATAL CRUSHING INJURIES WHILE WORKING UNDER THE BOOM OF A BANTAM 350 CRANE. THE VICTIM AND CRANE OPERATOR WERE IN THE PROCESS OF REMOVING THE BOOM FROM THE MACHINE. THE VIC TIM APPARENTLY POSITIONED HIMSELF UNDER THE BOOMAND KNOCKED OUT THE 2 BOTTOM PINS CAUSING BOOM TO FALL.

EE HAD USED A FIVE TON JACK TO RAISE A BELT HEAD. THE RIGHT SIDE OF HIS HEAD WAS STRUCK BY AN UNKNOWN OBJECT, POSSIBLY THE JACK BAR.

INJURED WAS HOLDING BACK-UP WRENCH WHILE 2 OTHER HANDS TORQUED STUCK DRILL RODS. BACK-UP WRENCH SLIPPED WHEN RODS WERE FULLY TORQUED, ALLOWING OTHER WRENCH TO FLIP OVER RODS AND STRIKE HIM IN THE HEAD.

EE WAS FATALLY INJURED WHEN A METAL FRAGMENT FROM A PLANTARY DRIVE UNIT WAS STRUCK WITH A SLEDGE HAMMER THE METAL FRAGMENT ENTERED IN HIS LOWER RIGHT NECK CUTTING THE AORTA

VICTIM WAS CLEARING OUT THE SCRUBBER.ANOTHER EMPLOYEE WAS WORKING WITH A SLEDGE HAMMER ABOUT 20 FT ABOVE THE VICTIM.THE SLEDGE HAMMER SLIPPED OUT OF THE EMPLOYEES HAND HITTING THE VICTIM ON TH E RIGHT SIDE OF THE HEAD AND CAUSED HIM TO FALL ABOUT 14 FEET TO GROUND LEVEL INTO LOOSE EARTH.

EMPLOYEE WAS TAKING PINS OUT OF A BOOM TO ADD AN EXTENSION WHEN THE PIN CAME OUT AND THE BOOM FELL ON THE EMPLOYEE.

WHILE EMPLOYEE WAS CLOSING DOORS IN RAILROAD CAR EMPTIES,THE JACKING BAR SLIPPED AND BAR STRUCK EMPLOYEE ON LEFT SIDE OF HEAD.BREAKING JAW AND NECK.

EMPL WAS FOUND BENEATH GOLF CART WITH EXTENSIVE HEAD INJURIES. VICTIM WAS UNCONSIOUS & APPARENTLY NOT BREATHING. INVESTIGATIVE IS BEING CONDUCTED BY MSHA.

HE WAS INJURED AS THE RESULT OF BECOMING ENTRAPPED BY SLIDING MATERIAL WHILE WORKING INSIDE A METAL BIN (ENCLOSED). THEY WERE ATTEMPTING TO LOAD A TRUCK FROM BELOW THE MATERIAL ATTACHED TO THE WALLS AROUND THEM (3 OF 4 WALLS HAD MATERIAL ATTACHED). THE SLIDING MATERIAL BURIED HIM COMPLETELY AND ANOTHER EMPLOYEE TO HIS CHIN.

EMPLOYEE'S WERE TRYING TO PULL TAIL SECTION BACK INTO PLACE. A PIPE HAD BEEN PUT ON HANDLE OF CHAIN FALL FOR EXTRA LEVERAGE. THE FALL CHAIN BROKE AND PIPE STRUCK INJURED IN CHEST. AS A RESU LT OF THE INJURY HE DIED AT HOSPITAL.