Search the record

Employee said they were lifting a box of 8 gauge shells weighing 50 lbs. and felt pain in their lower back.

Employee was carrying an acetylene tank when they felt a pulled muscle.

Employee was cleaning up material at the finish plant. EE walked up to the shop and told the supervisor to send the maintenance down to help when the super said the EE said hurt knee. *The EE was denied a vacation day for Friday.

Employee was picking up a piece of 2x2x1/4" angle iron when EE dropped it on their finger.

Employee was unplugging the crusher when a rock hit them in the left forearm.

Employee was discarding old scrap metal into a dumpster and hit pinky.

Employee was relining a chute when the "D" ring welded in the chute broke off dropping the steel on EE's left foot.

Employee was replacing guard on Portable Plant head pulley conveyor

On 11/26/18 EE was asked to help maintenance employee then said couldn't do it because EE hurt back on 11/21/18. This was at start-up.

Changing a screen.

Employee said in the first 15 min of start of shift needed to move the gun and pulled something in lower back.

Maint. mechanic was changing drive belts on fan when finger was rolled around sheave causing cut to left middle finger requiring 12 stitches on outside of finger

Employee was shoveling in #1 tunnel doing cleanup.

Installing a motor mount on the pony motor in the shop. Caught his middle finger in the hole on the mount.

While climbing #1 bucket elevator to grease on top, dust or stone got in left eye.

Taking a drive shaft out of a haul truck when drive shaft fell smashing left thumb between shaft and rear stabilizer.

Shoveling in #2 tunnel said he twisted knee

Lifting heavy object

Employee was working on top of #2 Elev. when co-worker opened the breach door letting dust out in area where employee was working.

Climbing out the kiln room window to gain entrance to catwalk to work on walls.

EE was putting out a fire on the coal conveyor.

Employee was installing belt drive system when an electric motor slid off its mounting bracket injuring employee's left knee and right hand.

Moving an oil drain pan from under a wheel loader, he felt his shoulder pop. Note: we were not made aware of this until 9/25/08.

attempting to remove a 6"x7' pc of 1/4" steel from the apron feeder @ the raw plant. winch had stoved emergency. When the pike let go it hit ee in the left cheek.

Employee was lifting a floor jack approx. 80 lbs. Employee complained of low back pain. Transported employee to health care provider. Diagnosed with lower back strain.

Employee was assisting maint tech changing sreens. Employee reached for a hot torch and suffered burns to his left forearm.

Rolling up air hose in shop, hit right hand on corner of steel plate.

Climbing in #1 ducon scrubber to clean the "J" chute, he was bruise by the door.

EMPLOYEE WAS ASSISTING IN REPAIR OF TRUNNION, WHILE REPOSITIONING HE LEANED HIS HAND ON TRUNNION COVER. THE COVER WAS OFF TO THE SIDE LEANING AGAINST BASE. EE GOT HIS LEFT PINKY MASHED BETWEEN THE COVER & BASE WHEN THE COVER SLIPPED & FELL. INJURY REQUIRED STITCHES.

Employee was assisting contractor (truck driver) with hard to operate latch on trailer tailgate, when latch let loose ee mashed right ring finger between handle and tailgate. Received fracture and 20 sutures to repair nail bed.

WORKING ON JAW CRUSHER REPLACING TOGGLE PLATE, STANDING PLATE ON END WHEN EMPLOYEE'S RT. POINTER FINGER BECAME PINCHED BETWEEN PLATE & "I" BEAM SUPPORT.

CLIMBING IN SCREEN DECK AT THE PORTABLE PLANT & HE HIT HIS RT. KNEE ON A PIECE OF STEEL.

WHILE CLEANING WORK AREA-PLACED 4" STEEL PIPE PIECES ONTO FORKS OF FORK LIFT. CAUGHT FINGER OF LEFT HAND BETWEEN TWO PIECES OF PIPE.

EMPLOYEE TRIED TO CLOSE FRONT WINDOW OF TRACKING, STRAINED MUSCLES OF RIGHT SHOULDER WHILE REACHING UP FOR WINDOW.

EE REPLACING BEARING ON CRUSHER ROTOR (ELECTRIC LOCKED OUT), WHILE ANOTHER EE ROTATED IMPACTOR ROTOR, INJURED EE WATCHING BEARING - PLACED HAND (LEFT)BETWEEN ROTOR AND CRUSHER WALL - ROTOR HAM MER CAUGHT HAND BETWEEN ROTOR AND CRUSHER SIDE WALL.

EE WAS REMOVING A GUARD, PLACED A PIECE OF THE GUARD TO THE SIDE AND WENT TO GET A TOOL. ON HIS RETURN HE HIT HIS HEAD ON THE PIECE HE JUST MOVED, LACERATING HIS FORHEAD REQUIRING 3 SUTURES.

EMPLOYEE ASSISTING MAINT REMOVE BOLT FROM MOUNTING. BOLT SLIPPED AND STRUCK EE ON RIGHT SIDE OF FACE REQUIRING 2 SUTURES TO CLOSE LACERATION.

EE WAS SHOVELING SPILLED MATERIAL BACK ONTO THE CONVEYOR BELT, FELT HIS BACK MUSCLES "PULL" WHILE SHOVELING.

EMPLOYEE WAS REPORTING A HOT STEEL SHAFT FROM A COOLER. GRABBED SHAFT WITH BARE HAND CAUSING THERMAL BURNS TO FINGERS OF RIGHT HAND.

EE HELPING TO MOVE PORTABLE TANK(60 GAL.)- WHEN ADJUSTING, HE PINCHED R. MIDDLE FINGER BETWEEN TANK AND LOADING TOOL. EE WAS WEARING GLOVES BUTPINCH CAUSED LACERATION TO PAD OF FINGER. CLINIC CLEANED & CLOSED W/12 SUTURES.

HE WAS LIFTING MATERIAL TO REMOVE IT FROM THE AREA AROUND THE DURON STRUCTURE. HE FELT PAIN IN LOWER BACK AND LEGS.

EE ON ONE KNEE, PUSHING A 100 TEN HYD. JACK INTO POSITION, WHILE PUSHING FELT PAIN IN UPPER BACK.

EE SHOVELING SPILLED MATERIAL, COMPLAINED OF PAIN IN RIGHT ELBOW AND SHOULDER.

FINE DIRT UNDERNEATH CRUSHER LODGED ON FRAME. WHILE CRAWLING UNDER THE CRUSHER ON THE CONVEYORBELT, MATERIAL FELL INTO EMPLOYEE'S EAR. AS A RESULT AN INFECTION OCCURRED.

CONTRACTOR WAS WORKING WITH ASSOCIATE ON OPERATINGY STATIONARY HOIST. ASSOCIATE HAD BOX WITH CONTROLS AND WAS GETTING OUT OF HIS REACH. HE SWUNG THE BOX WITH CONTROLS WITCH WAS ON A CABLE TO H IS PARTNER, PARTNER MISSED AND BOX HIT HIS CHIN.