Search the record

Employee was bending roof bolts when he turned and twisted his right knee.

Employee was lifting a 8' timber into a scoop bucket when he strained his abdomen, this resulted in the employee having to have hernia surgery.

Employee was moving bolter cable over against coal rib.

Employee was lifting a miner cable to hang it on #1 unit in #10 ENTRY when he felt a pain in his back.

Employee was loading boards onto roof bolter and felt a pain in his back.

Employee was reaching for a roof bolt when the pin board fell and hit him on the finger of the left hand.

Employee was bending pins and turned around to place pins and strained his back.

Miner was lifting belt framing. and sprained back

While loading the roof bolter with supplies he cut his arm with a steel band.

Employee was bending a roof bolt.

Unloading a tire in the battery shack and twisted his knee. This did not become reportable until 7/15/11.

Employee was moving a rear end for a diesel mantrip and caught his ring on a bolt in the rear end. The ring cut into his finger, requiring 11 sutures.

Employee was throwing roof bolts out for the next row to be bolted when he felt his left knee pop.

Horseplay resulting in a dislocated shoulder. This accident has been rejected by Comp. carrier

Employee was installing a timber in a arch when it slipped and fell smashing his middle and ring fingers on his right hand.

Employee was loading boards on the roof bolter and cut his finger on a metal band off of the bundle of roof bolts, 3 stitches in the right middle finger.

Worker had been painting for approximately 1 1/2 weeks at this mine. He accidentally came into contact with some of the paint, causing 1st degree burn/conjunctivitis.

While attaching a jackpipe to a belt tail the pipe slipped off of the anchor and fell across his lower back.

Radiator over heated on a diesel ride and when he tried to take the cap off, hot water sprayed on his left hand, causing it to blister.

Employee was helping to unload a roll of belt on the surface. When they got to the end of the roll, the steel pipe they were using to hold the belt came off and hit him in the left foot.

Employee was reclaiming high voltage cable and couplers. As he was dropping a coupler he was holding the cable on his shoulder and strained the shoulder. This did not become reportable until 10-05-2009.

Employee was changing a rear tilt jack on a roofbolter and while lifting the jack up to the cradle he felt a pain in his right shoulder. This did not become reportable until 7-7-2009.

Employee was laying on the ground working on a shuttle car, when a piece of metal fell off the car and struck him across the right forehead above the eye, causing a laceration needing 4 sutures.

He reached down to pull up miner cable and felt a pain in his back. This did not become reportable until 7-29-08.

Hanging a bolter cable, when the operator put the cable reel in the cable hit employee in the mouth resulting in eight sutures.

Putting in belt stands he caught his finger between two sections of belt structure causing a fracture to his finger.

Employee was putting a bag of rockdust on his golf cart and felt a pain in his lower back. First day off was 2-6-08.

Employee was helping to pull up miner cable, when his finger got caught between the cable and the pull rope.

Employee was standing in mud and when he tried to step out of the mud his foot stuck in the mud causing him to twist his knee.

Removing flume screen and when he tried to lift it he felt a pain in his back.

Employee was removing his tool box from his golf cart and when he turned to put it down he felt a pain in his right knee.

Employee was helping to connect a rockdust trailer to a battery jeep when he caught his left index finger between the connecting pin and the frame of the jeep. He recieved a crushing injury to the finger causing it to have to be amputated at the first joint the next day.

Helping to lift a section of flights for continuous miner and felt a pain in his groin.

Employee was loading supplies onto his roofbolter and twisted his knee.

Bending a roof bolt to straighten it out and twisted his rt. shoulder

Employee was pulling a drill steel out of the roof and when it came loose it struck him in the chest causing an abrasion.

Employee was lifting a continuous miner cable and felt a pain in his groin.

Employee was lifting a 6'' I-Beam and felt a pain in his groin

Employee was lifting a miner cable and felt a pain in his shoulder

Employee was splicing a conveyor belt and hit his leg on the belt framing, causing a laceration.

When he lifted a belt roller, he felt a pain in the right side of his neck. Management was not aware of this until 6-4-07.

Employee was pulling on a hose and strained his back.

Employee was in the outside shop cutting a piece of metal. He turned the piece of metal over and caught his left little finger between the piece of metal and the table crushing the end of his finger, requiring sutures.

Taking rub rail off of continuos miner, when the rail came loose it hit him on the left leg and knee.

Employee was installing top belt stucture and felt a pain in his lower back.

Pinner steel was stuck in roof and when he pulled on it the steel came out of the hole and struck him over the right eye.

Picking up the end of a welding trailer and felt a pain in his right groin. An attempt was made to report this on-line 9-21-06 but it did not go thru.

Pulling miner cable across intersection and strained his back. First day off 09-14-06

Lifting one end of a piece of expanded metal and the person lifting the other end dropped it, causing a sharp end to cut his left middle finger, requiring 9 stitches.

Hooking up cat head at power center and felt a pain in his lower back. Did not become reportabe until 7/17/06-First day off.