Search the record

Employee was hit with a clevis in the mouth resulting in a busted lip and broken teeth.

Employee got a pinky finger smashed between 2 screens. Nail came loose and it was glued back on.

Was changing a hydraulic motor on telesmith while loosening bolts my finger got smashed while holding bottom nut removing bolts .

Employee was helping other employees carry a metal plate and they dropped it on their finger, fracturing it.

Employee was doing quality control work and tweaked EE's knee.

Employee smashed EE's finger between equipment and conveyor.

EE was moving a barrel that had liquid and material in it and went to move it and tweaked lower back. Now when moving it side to side it has sharp pains.

Employee was removing a rock that was lodged and the saddle came back and jammed EE's finger. The injury wasn't recordable until they found a fracture and put EE in a rigid brace on 11/19/24.

Employee had breaker bar propped against jaw die trying to hold back up to take bolts off of the jaws toe protector. The breaker bar slipped off the jaw die and swung around and hit EE in the arm.

Employee was shoveling rock from the walkway and twisted EE's back

EE was shoveling in between the shuttle conveyors of the bottom floor of the Mill. EE was shoveling bent over to avoid the conveyor above EE and twisted after getting a shovel full to throw into the bin. EE then felt a shock in the lower back.

Injured employee was working on clearing a centrifugal pump that was sanded off. The discharge polyline was removed to access the inside of the pump, while pulling hand out of the discharge side of the pump after feeling for blockage IE contacted the sharp edge of the pump impeller causing a laceration to left hand, middle finger that required 23 sutures.

One employee threw a shovel up to another employee cutting the catchers hand.

EE was on EE's knees pushing the new screens into the bottom deck and EE's knee popped.

Shoveling in the bin and tweaked back.

Was putting railroad ties on a trailer to set part of the jaw crusher on, EE miss placed EE's foot and step off the trailer. With doing so EE hit the ground and a railroad tie landed on the center of EE's ribs.

EE was moving the electric 3 1/2 ton hoist with about 25' of chain on the overhead trolley system for picking up parts.

Employee was lifting a ladder out of a hole and strained back.

employee smashed EE's finger between 2 rocks and received 2 stitches

Employee was bent over the feeder gate for a prolonged time and when employee stood up, had pain in lower back.

Employee pinched finger in between 2 pieces of metal tubing

EE was working on some parts and the door to the area EE was working in started to shut and EE stuck hand in to catch it.

Lack of Three Points of Contact. 2 Stitches to the Left Middle Finger. No Lost Time

EMPLOYEE WAS LIFTING A GUARD WHEN EMPLOYEE FELT SOMETHING POP IN ELBOW. EMPLOYEE REFUSED MEDICAL TREATMENT UNTIL MARCH 30TH AND NOW EMPLOYEE WAITS FOR SURGERY.

Removing pin from loader arm, when pin came out it fell and struck EE.

Employee was moving a cross member and dropped it, smashing EE's R ring and middle finger.

EE and another employee were moving a motor over to a conveyor. When they reached the pedestal, EE had EE's hand underneath and it got cut.

Employee was helping other employees change out a conveyor when a rock that was lodged in a roller broke loose and shot out at the employee, hitting EE in the chin. EE received 6 stitches and 1 day lost time.

Employee was changing screens and felt a pop in EE's right elbow. No restrictions until EE's surgery date of 6/11/2020.

Employee was working on feeder apron and one of the idlers fell on an index finger, smashing it.

Employee picked up a hydraulic line to clean under it and it broke, striking them in the face. Employee received 5 stitches.

Employee dropped a piece of metal on EE's foot. EE waited until 11/17/19 to seek medical attention.

Employee was lifting the cable over the buoy and strained EE's back.

Employee as shutting the door to the shop and EE's thumb got caught in between the latch and the door, lacerating it.

Employee was changing V belts when the guard fell. When EE tried to catch it, EE strained EE's back. EE sought medical attention 6/28/18.

Employee felt pain in shoulder after pulling down on a conveyor belt. EE did not seek treatment until 7/9/18 and did not have any restrictions. Was seen again on 7/11/18 and now has restrictions.

Employee was trying to free up a gate under a bin and finger was smashed in the gate.

Employee was loading rock into a basket when one rolled back and smashed left thumb.

Employee was carrying a piece of steel and when ee went to lift it to the deadbox, ee felt a pull in shoulder.

Employee smashed finger in a roll away chute at the scalping screen.

Employee was fusing pipe when the pipe came down off the hook and struck EE in the face.

Employee thinks EE hurt back while working on the C-17. EE did not seek treatment until 7/28/17.

Employee was working on a loader when the part EE was working on shifted and tweaked EE's back.

Employee was shoveling overhead when employee strained employee's back.

Employee had been using a fire hose to wash out the quarry truck when they realized they had tweaked their back.

Employee was opening the shop doors when one of them slipped and cut the palm of hand, stitches required.

Employee was moving a bucket of flexco and strained back.

Employee reported that his back became sore throughout the day but did not require medical treatment. On 10/5/2015, the employee requested to go to the clinic for treatment.

Employee reported 9/23/15 that he hurt his back 9/22/15 installing new shoes on the VSI. He refused medical treatment until 9/24/15.

Employee was shoveling off the F4 conveyor when his lower back locked up.