Search the record

EE WAS WORKING THE BACK OF A SERVICE TRUCK OFF LOADING SCREENS. THE HOOKED EDGE OF A SCREEN CAUGHT EE'S GLOVES PULLING HIM DOWN. WHE HE LANDED, THE HOOKED EDGED OF THE SCREEN PENETRATED HIS R IGHT HAND.

CARRYING TABLE EDGE LINERS TO CANICA DESK WHEN A SHARP PAIN OCCURRED AT RIGHT ELBOW WHEN SETTING TWO EDGE LINERS DOWN ON CONICA DESK.

EE WAS CLOSING FEED DOOR ON C-1 MAIN FEEDER WHEN HANDSLIPPED ACROSS THE SIDE RAIL AND CUT THE EE'S FINGER. 3RD FINGER RT HAND.

THE EMPLOYEE WAS MOVING PVC PIPE 3" AND 4" FROM NEAR THE BATCH PLANT TO THE PIT TO HOOK UP TO A WATER PUMP. ALL OF THE PIPE HAD TO BE CUT AND LOADED ON A TRUCK THEN UNLOADED AND PLACED WHERE NEEDED. AFTER A COUPLE OF HOURS, HIS BACK BECAMEVERY SORE AND STIFF.

EMPLOYEE WAS EMPTYING A BUCKET OF TESTED MATERIALS WHEN HE PULLED A MUSCLE IN HIS BACK EMPLOYEE WAS BENT OVER SLIGHTLY DUMPING BUCKETS OF TESTED MATERIALS WITH AN UNDERHAND THROWING MOTION BUC KETS WEIGHTED APPROX 25LBS

EMPLOYEE WAS FUELING A 4X4 WATER PUMP. WAS CARRYING FIVE GALLONS OF FUEL TO THE PUMP WHEN HE SLIPPED AND TWISTED HIS BACK.

EMPLOYEE WS CHANGING A 5/8 RUBBER SCREEN IN THE HEWITT ROBINS SHAKER IN THE SECONDARY PLANT TOWER. ANOTHER EMPLOYEE WAS ON ONE END OF THE SCREEN ATTEMPTING TO DISLODGE FROM TRAY. EMPLOYEE WA S BENT OVER SCREEN, PULLING UP ON SCREEN, WHILE A SECOND PERSON WAS USING PRY BAR TO DISLODGE SCREEN. AS EMPLOYEE PULLED UP ON THE SCREEN HE FELT A SHARP PAIN IN HIS LOWER BACK AREA.

EMPLOYEE WAS REMOVING CANICA PARTS OUT OF A 55 GAL DRUM (ER-33 FEED CONE). HE COULD NOT PULL THE PART OUT WITH THE BARREL UPRIGHT. HE THEN LAYED THE BARREL ON ITS SIDE. AS HE PULLED THE LOWER PART OUT, HE DID NOT NOTICE A PART ON TOP THAT HAD NOT FALLEN OVER. THIS PART FELL ON HIS RIGHT THUMB.

REPLACING DOOR IN CHUTE, FELT PAIN IN MIDDLE OF BACK

EMPLOYEE WAS WORKING ON THE SECONDARY CANICA VSI CRUSHER & WAS STOCKPILING PARTS FOR SERVICE HE STRAINED HIS WRIST PULLING PARTS FROM A 55 GAL BARRELL

EMPL LIFTING WATER PUMP BY THE HANDLE.THE PUMP OVERTURNED,SQUEEZING AND BENDING LEFT RING FINGER BETWEEN PUMP BODY AND HEAD.

EMPL WAS CHANGING 1/4 DRUM OF GREASE ON PIONEER CRUSHER. GREASE WAS IN BUCKET OF 980 LOADER & RAISED TO LEVEL NEEDED HE THEN MOVED IN BUCKET OF 980 LOADER & RAISED TO LEVEL NEEDED. HE THEN MOV ED DRUM FROM LOADER BUCKET WHEN HE FELT PAIN SHOT FROM BACK DOWN BOTH LEGS.

HE WAS WORKING WITH ANOTHER EMPLOYEE, REPLACING A TROUGHING ROLLER. BOTH EMPLOYEES WERE HOLDING THE ROLLER AND TURNING IT OVER. THE OTHER EMPLOYEE PUSHED HARD BEFORE HE WAS READY, TRAPPING HIS HAND BETWEEN THE ROLLER AND THE CONVEYOR.

EMPLOYEE WAS CHANGING THE TUB LINES ON CRUSHER. HE WAS REMOVING WORN PARTS FROM UNDER THE ANVIL RING. THE EMPLOYEE REMOVED MORE PARTS THAN NEED, CAUSING THE ANVIL RING TO DROP. THE RING FELL O NTO THE EMPLOYEE, WHO WAS PINNED BELOW IT FOR APPROX. 10 MINUTES.

EE WAS DISASSEMBLING SHAKER BEARING WHEN HE DROPPED A SMALL COUNTERWEIGHT ON THE TOP OF HIS RIGHT FOOT.

EMPL WAS SHOVELING MATERIAL AROUND CONVEYOR IN SECONDARY PLANT & FATIGUED RIGHT SHOULDER & ARM.

HELPING CHANGE INPELLARS IN CRUSHER STRAINED BACK LIFTING PARTS

TURNING TO REACH A RAG HURT BACK.

EMPLOYEE WAS REMOVING DEBRIS FROM LOT #27 RECLAMATION. HE WAS HAND LOADING DEBRI AND EXPERIENCED PAIN IN LOWER ABDOMINAL AREA.

ADJUST CRUSHERS PC OF STEEL FELL INTO EYE.

EMPL WAS IN PROCESS OF CHANGING BAD IDLER ON RECYCLE CONVEYOR. IDLER WEIGHING APPROX 30 LBS TIPPED OVER ON TO EMPLS RIGHT INDEX FINGER AT NAIL AREA CUTTING & SMASHING TIP.

EMPL HAD LIFTED K-7 3RD MEMBER REAR-END AND WAS CARRYING IT UP CATWALK TO HEAD PULLEY AREA.

EMPLOYEE WAS LIFTING AN ANVIL PIECE OF STEEL OUT OF THE CANICA CRUSHER EMPLOYEE EXPERIENCED PAIN IN HIS BACK AND GROIN AREA POSSIBLE MINOR HERNIA

EMP WAS REMODLING GRIZZLY CHUTE FORM TELLSMITH FEEDER TO #1 UNDER JAW BELT. EMP.WITH HELPERS ASSISTANCE WAS PLACING A SHEET OF STEEL 24" X 16" BY HAND WHEN THE STEEL SLIPED AND CUT EMP FINGER

EMPLOYEE WAS TAKING OUT CLAMP BAR BOLT WHEN CLAMP BAR SPRANG UP SMASHING HIS THUMB AGAINST THE SIDE OF SCREEN DECK

EMPLOYEE AS RETURNING TOOLS TO TOOL STORAGE BOX AT THE END OF WORK SHIFT. SOMEONE LEFT A PIECE OF ANGLE IRON RESTING AGAINST TOOL BOX. WHILE CLOSING TOOL BOX LID THE PIECE OF ANGLE IR ON OVER STRICKING EMPLOYEE IN MOUTH.

EMPLOYEE WAS TRYING TO WRAP CHAIN HOIST AROUND CHUNK OF SANDSTONE IN GRIZZILY, WHEN SANDSTONE SLIPPED AND PINCHED LEFT LITTLE FINGER CAUSING NEED FOR STITCHES.

WATCHING FOR D9BRIS ON CONVEYOR BELT LUNGED FOR TRAMP IRON ON BELT. PULLED MUSCLE IN CALF OF LEFT LEG

WHILE PUSHING P5ATE ON BACK OF SERVICE TRUCK GLOVE CAUGHT ON PLATE ROLLED GLOVE TIGHT AGAINST FINGER AND TORE LOOSE A WART ON FINGER.

WHILE CLEANING 8ISCHARGE CHUTE OF ROD GRIZZLY A LARGE CHUNK OF MATERIAL FELL FROM UPPER PORT ION OF CHUTS & SLID DOWN ONTO LEFT ANKLE & FOOT

HE WAS INSTALLI3G TRANSMISSION IN WATER TRUCK ON BACK PUSHING UP WITH FEET. SPRAINING BACK.

MAINTENANCE ON 1RIMARY CANICA MOVING BROKEN CASTING PARTS AROUND ON GROUND.EMPLOYEE WAS PICKING THEM UP FROM AROUND CANICA DECK AND PILING THEM FOR REMOVAL.

SHOVELING UNDER3APRON FEEDER INA CROUCHED POSITION

EMPLOYEE WAS AS8ISTING WITH AN OIL CHANGE OF 8 X 20 VIBRATORY SCREENS IN SECONDARY PREMUM DUST PLANT. HE WAS BETWEEN DECKS, AND WHEN HE TURNED HIS HEAD TO SEE, HIS HARD HAT KNOCKED A LARGE AMO UNT OF VERY FIN9 DUST INTO HIS LEFT EYE.

EMPLOYEE WAS AS8ISTING IN CHANGING A CROSS BEAM. EMPLOYEE WAS HOLDING BEAM WHILE PARTNER WAS APLLYING FASTENERS.

SHOVELING AND S7RAINED HIS BACK.

EMPLOYEE WAS SH2VELING MUD AND ROCK OUT FROM THE CONVEYOR AND STRAINED THE MUSCLES IN HIS UPPER AND LOWER BACK.

EMPLOYEE HAD NO3SPECIFIC CAUSE OF INJURY.HIS RIGHT HAND IS BRUISED,SWOLLEN AND NUMB AND HIS LEFT HIP WAS SRAINED WHILE MOVING STEEL.

WHILE EMPLOYEE 4AS PULLING PLATE UNDER THE CHUTE HE TWISTED HIS BACK.

WALKING BACKWAR8S PULLING WATER HOSE-FOOT STUCK IN SOFT SAND TWISTING KNEE.

EMPLOYEE WAS MO5ING 1/2 INCH STEEL AND DROPPED IT ON HIS FINGER AND SMASHED AND CUT IT.

EMPLOYEE WAS LI0TING TOOL BOX FROM THE GROUND INTO THE DRAGLINE AND STRAINED BBACK

EMPL SHOVELING 5ND CLEANING UP AND EXPERIENCED SHARP PAIN IN CHEST.

EMPLOYEE WAS GE7TING OUT OF BOBCAT AND COULDN'T STRAIGHTEN OUT HIS BACK.

EMP WAS REMOVIN1 SKIRT BOARD, IT CAME LOOSE, SPRANG AND HIT EMPLOYEE ON THE FOOT

EMP WAS LIFTING3TO CLEAN THE BASE OF THE KINGPIN AND STRAINED BACK AND W AIST

EMP WAS USING H3S HAND TO REMOVE A LARGE ROCK FROM THE SAND GRIZZLE, THE ROCK ROLLED ONTO HIS HAND SMASHING IT BETWEEN THE ROCK AND THE GRIZZLE

EMP WAS WELDING3AND TWISTED AROUND TO PICK UP A CHIPPING HAMMER HE FELT A SHARP PAIN IN HIS BACK

EMP WAS OPENING3A GREASE CAN AND THE BARRELL FELL ON HIS TOE

EMPLOYEE WAS PULLING THE HOUSE BRAKE ASSEMBLEY APART ON THE DRAGLINE. THE BRAKE ASSEMBLY SLIPPED OUT OF HIS LEFT HAND AND FELL 5 TO 10 INCH ONTO HIS FINGER.