Search the record

Employee was seated power washing, stood up and felt pain in their right knee.

Employee stated that while changing liners, a rock fell from a ledge, bounced off something, and struck EE in the mouth, breaking a tooth.

Technician was removing a transmission plate from under a 980G loader when the plate fell on EE's left arm causing a fracture. The plate was held by one bolt which bent/broke causing the plate to fall.

Employee stated was lifting bags of ANFO and felt a strain in the left shoulder. Went to the doctor on 6/14/2019 and was referred to physical therapy. Was first aid until then.

Technician was installing a suspension cylinder on a 773 Off Road truck. While attempting to push the rigged cylinder in to place technician felt a pinch and pain in lower back.

Employee stated ee was helping splicing a belt and pinched finger in the belt clamp

The employee stated that when stacking bolts on the roof bolter the employee cut arm on a band.

The employee was adjusting the seat forward and struck her left knee on the dash.

Employee was lying on his stomach checking the oil on a 8x20 shaker and when completed he went to sit up and felt a "charlie horse" in his low back.

Employee was working on a Pantera 900 drill and he was removing a cover off of the side of the boom, when he bent to set it down he felt a sharp pain in his low back.

EE was working in the crusher tower repairing the hammer mill. He handed another employee some tools and turned around and struck his upper front tooth on the lid of the mill. His front tooth was chipped toward the midline.

EE states he was working on a truck removing a flywheel. He does not know how he got some metal in his eye.

EE reported to have injury at work after working all weekend at his 2nd job. EE admitted to working at his shop 8-10 hrs barbequing on concrete at pumpkin patch. Minor lifting of pumpkins from bed of truck resulted in strain. Questionable as being work related.

EE alleges to have injured left ankle & right knee while performing maintenance on slide chute.

EE alleges he cut his right ring finger on a bolt while removing a metal screen holding plate.

EE does not know when or how accident occured. EE wanting to go to Dr 3/17/06 3:30 p.m. His eye was painfull and swollen. EE thought it could have been from 3/8/06 when he had been Welding. EE went to ER to have a piece of metal debris in his eye removed.

EE alleges he was injured on 2/9/06 but at the time he declined medical treatment.Then in 2/23/06 he was taken to SSM Health Works where an x-ray revealed him to have a low back strain. At which time EE was put on restricted activity.

EE told others that he was coming out of the crusher where he had been welding. The others did not hear him. When he came out of the crusher he was hit in the head by a piece of steel requiring 4 staples in his head. When hit he had on a welding helmet.

EE stated they were changing screens and he pulled on the bottom screen when at that time he felt a sharp pain go through his left shoulder

Employee states he was getting in his truck when he hit his right knee on the step. He did not reort the incident to the company until 8/15/05. "No medication was prescribed, only x-rays."

EMPLOYEE WAS MASHING TRASH INTO A TRASH BARREL WITH A PIECE OF SQUARE TUBING & HE CAUGHT HIS FINGER BETWEEN THE BARREL & THE TUBING REQUIRING SUTURES.

EE WAS SHOVELING WITH A HAND SHOVEL WHEN THE SHOVEL HIT THE FLOOR UNDER THE MATERIAL AND JARRED HIS RIGHT ELBOW, CAUSING SOME PAIN.

Placing a beam across #7 & 8 bin when employee felt a pain in right shoulder.

EMPLOYEE WAS TRYING TO GET BIN #2 UNFROZEN & WAS CHECKING TO SEE IF THE BIN WAS CLEAR WHEN A ROCK FELL & HIT HIM IN THE BACK OF THE HEAD.

EMPLOYEE STATES HE WAS LIFTING A 4" BEAM ABOVE HIS HEAD & PULLED A MUSCLE IN HIS LOWER BACK.

Employee states he was taking down a piece of belting to weld grizzly shaker, when he hit his right elbow on the drive guard. Doctor states he has a swelling and tenderness on the medial side of the right of the right elbow. Doctor gave the employee a 30 day prescription for Ibuprofen 800 mg., and released to full duty.

EMPLOYEE STATES HE WAS CHANGING LINER ON #2 IMPACT CRUSHER WHEN THE LINER FELL, HE JERKED THE AIR HAMMER HE WAS USING AND STRAINED HIS LEFT SHOULDER.

Ee was loading bags of anfo to be delivered to the blast site. On 4-21-04 he told his supervisor that his arm was hurting and thinks it is from loading the bags of anfo.

EE ALLEGES HE WAS LIFTING 2 SHEETS OF METAL HE HAD JUST CUT UP ONTO THE WORK BENCH. HE THEN FELT A SHARP PAIN IN THE MIDDLE RIGHT SIDE OF HIS BACK.

EMPLOYEE WAS REMOVING ICE OFF RAILROAD TRACK AT NORTH STONE WHEN HE ALLEGES HE FELT STIFFNESS IN HIS BACK THE NEXT MORNING.

EE WAS CLOSING THE LID ON THE HAMMER MILL WHEN HE WAS PINNED BETWEEN THE LID & THE U-BELT GUARD.

EE WAS PREPARING TO INSTALL A MILL HAMMER SHANK WHEN THE SHANK TIPPED OVER SMASHING HIS RIGHT THUMB.

EE ALLEGES THAT HE WAS LIFTING A 5 GALLON CAN OFOIL ONTO THE SHAKER ABOUT CHEST HIGH AND FELT A "POP" IN HIS RIGHT SHOULDER.

EMPLOYEE ALLEGES HE WAS SEATED AND TURNED TO HIS LEFT, DUCKED HIS HEAD TO EXIT THE CAB AND FELT A SHARP PAIN IN HIS BACK WHICH RAN DOWN HIS RIGHT LEG.

EE AND COWORKER WERE INSTALLING 65 LB WEAR LINERS IN A UNIVERSAL IMPACTOR. EE TWISTED BODY WITH THE LOAD FOR PLACEMENT. DURING TWISTING MOVEMENT, HE EXPERIENCED PULL TO LOW BACK. INCIDENT REPORTED TO SUPERVISOR ON MONDAY, 4-8-02. AFTER DISCUSSION, THEY ELECTED TO RECEIVE TREATMENT FROM CHIROPRACTOR.

CHANGING SCREENING IN BIN HOUSE #1 DIESTER WHEN FINGER WAS SMASHED BETWEEN SCREEN AND HANDRAIL.

EMPLOYEE ATTEMPTED TO LIFT THE PORTABLE WELDER WITH THE ASSISTANCE OF A CO-WORKER FROM GROUND TO WORK TRUCK, WHILE LIFTING EMPLOYEE HE FELT HIS FOOT SLIP AND A STINGING SENSATION IN HIS KNEE.

PULLING DUMP LEVER ON HAUL TRUCK TO DUMP LOAD CAUSED INJURY/ILLNESS

CARRYING 50LB BAGS OF AMMONIUM NITRATE FUEL OIL (ANFO) CAUSED INJURY/ILLNESS

WHILE PERFORMING MAINTENANCE, EMPLOYEE GRABBED DRIVE BELT AND PULLED, CATCHING SMALL FINGER BETWEEN PULLEY AND BELT.

LOADING BAGS INTO POWDER TRUCK IN SQUATTING AND TWISTING POSITION AND LOADING HOLES.

DURING MAINTENANCE WORK PERFORMED ON GRIZZLY, EE WENT TO SHOP TO GATHER NEW BOLTS TO REPLACE THOSE HE HAD JUST CUT OFF FROM UNDER GRIZZLY UPON REACHING INTO BOLT BINE EE FELT BACK SPASM. SPASM S GREA CONTINUOUSLY WORSE REQUIRING TRIP TO EMERGENCY ROOM.