Search the record

ee was placing foam between stone slabs when several fell, pinning EE's left leg between the stone and the trolley the slabs were on.

EE was moving stone by hand to mouth of the splitter, pinches thumb between the stone and chisels on the splitter

ee was stacking stone on a pallet and smashed a finger between two stones

ee was helping load stone in skid steer, finger got caught between two pieces of stone

Employee smashed finger between two stones while palletizing.

EE reached up to take a pallet off the stack, the pallet twisted around, EE felt something tear in right shoulder

EE was rolling stone back from splitter mouth when the material continued to roll back smashing EE's left thumb between multiple pieces of stone

ee was chaining down blocks of stone on flatbed trailer, felt a pop in EE's right forearm/elbow. Was taken to ER and released to full duty with no restrictions the same day

While stacking stones on a pallet, EE smashed left index finger between two stones.

Pulling a stone off of the conveyor, felt a pain in abdomen around belly button

EE was bent over to pick up a stone to place in the basket of the skid steer when EE felt a pain in the belly button area.

while carrying a stone with co worker EE slipped on wet floor with legs going different directions. felt a pop in left hamstring. Proper foot wear for the conditons was worn.

Employee was turning a cutting table by pushing with one arm and pulling with the other and strained the trapezius muscle in upper back. Employee was taken to a hospital for treatment. They performed an exam as well as a post accident drug screening. Employee was placed on modified duty.

Employee was opening a sliding door on the polishing machine by pushing with one arm and pulling with the other. EE strained a muscle in EE's upper left back under EE's scapula. EE was taken to the local hospital for examination, given post accident drug and alcohol screening and released to modified duty.

Employee was reaching across the table and a rock fell onto the back of EE's left lower leg resulting in a contusion. EE was taken to Occupational Medicine for treatment, advised to elevate the leg for the remainder of the day and return to full duty the following day.

Employee was moving a pneumatic table and when the air had not fully released employee forcefully pushed it and employee twisted their back when it moved.

Employee was assisting another employee remove a guard off the in-feed table on a rock splitter table to make a repair. While removing the guard it slipped from their hands and fell onto the foot of one of them.

The IE was moving an L shaped piece of cut stone when part of the stone broke loose and fell towards the floor striking ee on the foot just above the safety toe protective area. The piece of stone struck only one foot.

The individual was standing at EE's work station when a piece of stationary stone broke apart and struck the top of EE's foot.

EMPLOYEE WAS MOVING A 4X4 TIMBER WHEN A PIECE OF STONE FELL AND STRUCK THE 4X4. THE 4X4 WAS FORCE DOWN ON TO THE EMPLOYEES LEFT FOOT CAUSING BRUISING.

Bent down to pick up a rock and a sharp pain occurred in lower back area.

Handling veneer stones and felt pain in lower back. Did not notify us until 09/09/2014.

Employee was stacking product on a pallet. He was trying to force a piece of stone in between two others and the piece suddenly went between them. When the stone slipped in between them it caught his right ring finger pinching it at the nail. Employee didn't notify management until the next day and we took to the clinic.

EMPLOYEE WAS STACKING STONE ON PALLET WHEN THE STONE BROKE AND FELL ONTO HIS MIDDLE FINGER.

Employee was pulling frozen rocks when they came loose and jammed back onto his finger.

Contract worker was throwing away a piece of scrap stone into a rock bin and pinched the tip of his little finger off between the rock and steel bin wall.

Employee alleges he had his hand resting on a pallet and a rock sitting on the pallet fell over onto his hand. The stone that fell over was shaped like a tall building brick.

Removing rock from end feed of park industries splitter. Co-worker had placed 3 lb hammer in slot on conveyor. Smashed hand between rock and hammer head that was sticking up from the out feed belt.

Employee alleges he was taking a 25 ls rock from the 24" saw and placing if on a pallet when he felt a pop in his back and the pain started medical history ceviled he had the same thing happen 4 other times with former ee and he also has diagneitive disk diease in his lower back.

The contracted employee was installing 4" PUC pipe in the splitter plant overhead from a man lift approx 12 ft above floor and 4-5 ft from ceiling. Throughout the installation procedure PUC glue and cleaner was used. All garage doors open in the building. He passed out, had a seizure, and transported to hospital by ambulance.

EE ALLEGES SHE WAS CLEANING UNDER SPLITTER OUTFEED BELT WHILE IT WAS IN THE RAISED POSITION WITH A GLOVED HAND. THE OPERATOR PUT THE BELT IN THE LOWERED POSITION WITH HER HAND IN THE WAY.

THREE EMPLOYEES WERE CHANGING A 72' SAW BLADE. THEY PLACED THE BOTTOM OF THE BLADE ON A 4X4 AS USUAL BUT USED ONE THAT WAS ONLY 1' LONG INSTEAD OF AN 8' ONE LIKE THEY WERE SUPPOSED TO. THE WE IGHT OF THE BLADE TIPPED THE 4X4 UP & THE BLADE ROLLED ONTO THE TOP OF VICTIM'S FOOT JUST ABOVE HIS STEEL TOE.

THE EE ALLEGES HE WAS REACHING UP A PILE OF ROCK TO RETRIEVE A ROCK AND HIS ANKLE TWISTED.