Search the record

The employee was moving a 55 gallon drum while holding the barrel at an angle. He tried to push an object out of the way with his left foot. This caused a pull or tear in the groin area.

Employee was repositioning an oil-covered pump onto a pallet. The pump slipped from his hands and pinched his right middle finger. An x-ray of the finger showed a fracture of the distal phalanx of his right middle finger.

Employee was working in the Pre-Heater tower to clean tipping valves when the left hand middle finger became caught between the hand rail and the tipping valve weight.

While moving boxes and furniture from second floor office to first floor office employee began feeling pain in neck, shoulder and back.

While overhauling Unit 7FKI a pipe slipped and fell on employee.

Caught finger in steel door of drill.

Employee pinched left hand middle finger palm side when he was placing a lid on the airslide. The finger got pinched between the two flanges. Employee was placed on restricted duty.

Employee placing gear guards on the mill gear when he felt pain in his lower back. Clinic diagnosed with strain to the lower back and placed on restricted duty for 2 days.

Installing liner in the mill when the liner slipped and pinched skin on palm side right hand pinky finger. The employee elected to voluntarily go home.

Employee was installing liners in the mill when a foreign body got in the left eye. Foreign body was removed from the employee but he still was still complaining. He was taken to the clinic where a rust mark was found on the cornea. The rust was removed by an Ophthalmologist.

Miner adjusting a ball mill liner in the mill, when the liner swung to the left, pinched left index finger between the liner and the diaphram which caused a fracture. Miner was placed on light duty on 1/13/07 but elected to decline the modified duty postion.

Miner removing liner in the ball mill, when it slid down and landed on his right foot behind the steel toe. The miner was informed on 1/3/07 that there was a fracture of the right 5th metatarsal. Miner was placed on restricted duty.

A co-worker was pulling a drive chain back into position when the chain slipped out of his hands striking the injured worker in the right elbow.

After the employee had changed a belt his hand became caught between the belt and the pulley.

Miner got struck by flying debris,(foreign body) on the left knuckle of index finger, as the operator of the jack hammer was chipping material. Miner received one stitch.

Miner was assisting two other mines in sliding a 2' X 6' X 1" steel plate three feet away from dry grass. Miners were repositioning plate so that cutting sparks would not make contact with, and ignite, grass. The distal tip of the small finger on the miner's right hand was severed when he reflexively jerked his hand back when it made contact with a rock underneath the plate.

Employee was performing an electrial inspection/repair when he struck his right elbow on the edge of a hydraulic panel.

The employee moved a heavy object with his left leg causing a strain to his left knee.

The employee was moving empty pallets when he felt pain in his low back.

While pulling hose from bottom part of oraface - high power water gun hit kick plate knocking cement material loose which fell underneath safety glasses causing corneal abrasion in left eye. Went to doctor on 5-19-05.

Employee was lifting transformers 7.5KVA from building to truck and truck to building. While pulling transformer out of back seat of truck, sprained muscles in elbow & shoulder. Initially first aid - now turned into lost time. Surgery on 3-3-06.

EE was 2-3 feet away when an object used to pull a metal I beam to the steel: broke loose and the object hit the ee on the right hand.

While trying to open a waste bin container ee struck himself in the chin causing a small contusion/laceration requiring 2 stitches.

While unplugging the 1st stage cyclone, ee walked into hot material around where they were unplugging-resulting in 2nd degree burn to right ankle. ee diagnosed 12-6-04.

While washing down work area, hose twisted out of employee's hands - striking him on right side of face near eye, knocking off safety glasses.

Ee was installing bearing on drive. He hit the adapter to align it and a metal chip came off and lodged itself into his chin.

Ee was installing 12" driscoll line at rock plant 8PW50 - while bending, twisting, lifting he experienced pain in lower back. Ee was taken off work by doctors 7-23-04.

LAST DAY WORKED 12/25/03. HURT BACK WHILE BENDING OVER TO OPEN LID OF BT2 BIN TO GET MEASURMENTS.

EMPLOYEE HIT HIS KNEE AGAINST A LINER WHILE LANDING A LOAD OF LINERS.

EMPLOYEE STRAINED BACK WHILE LIFTING A GENERATORONTO FLATBED TRUCK.

EE WAS INSTALLING SEAL WHEELS AT REAR END OF KILN INTO SQUARE BRACKETS SLIDE HUNG UP AND EE ABRUPTLY PUSHED IT PINCHING FINGER ON THE END OF THE BRACKET.

EMPLOYEE USING THE BALL HOPPER AND HOIST. THE BACKING PLATE USED TO HOLD THE HOIST GOT CAUGHT IN HIS RIGHT THUMB, PARTIALLY TAKING THE TIP OF RIGHT THUMB. PER CALL, VERY TIP OF THUMB WAS CUT O FF, THIS WAS NOT A TRUE AMPUTATION.

GRATE SLIPPED IN AND WHILE TURNING TO INSTALL, PINCHED RIGHT INDEX FINGER BETWEEN TWO GRATES. LOCATION 4 GM 2 MILL.

IMPROPER LIFTING TECHNIQUES.

HE WAS UNLOADING LARGE DIAMETER STEEL CABLE FROM BACK OF PICK UP TRUCK. WITHOUT USE OF PROPER P.P.E.

2 EE'S WERE MOVING A ROLLER IDLER FROM A CATWALK, ONE EE LOST HIS GRIP AND THE IDLER LANDED ON HIS LEFT FOOT.

EE'S FINGER WAS CAUGHT IN THE CAB DOOR OF DRILL TECH #874-014 AS HE WAS EXITING THE CAB.

EMPLOYEE WAS WALKING UP THE STAIRS, HE FELT PAIN IN RIGHT ANKLE.

EE WAS GETTINT COMPRESSION CYLINDERS OUT OF THE FOG ROOM. HE LIFTED THE CYLINDER AT AN AWKWARD ANGLE AND STRAINED BACK.

EE WAS CLEANING STEEL SHAVING FROM UNDER LATHE HE CUT HIS FINGER FROM ONE OF THE SHAVINGS.

STAGED ROLL SLID DOWN CATWALK AND HIT EE ON RIGHT LEG, CUTTING LEG.

EMPLOYEE WAS CLEANING A GREASE GUN AND THE HOSE ON IT WHIPPED BACK AND HIT HIM IN THE MOUTH.

EMPLOYEE WAS ADJUSTING THE HEIGHT ON A PORTABLE LIGHT WHEN THE STAND SLIPPED AND PINCHED HIS FINGER.

EMPLOYEE WAS PULLING ANTIFREEZE HOSE OUT FROM HOSE REEL WHEN DISPENSOR NOZZLE CAME OFF AND ANTIFREEZE WENT IN HIS FACE AND EYES.

PULLING ON BOTTOM COVER OF DRAG CHAIN AND IT BROKE LOOSE AND FELL ON FOOT.

EE WAS MOVING OIL DRUMS AND CAUGHT HIS LEFT MIDDLE FINGER BETWEEN TWO DRUMS.

AFTER ROLLING FROM UNDER A TRUCK I WENT TO STAND UP AND PAIN WAS IN MY RIGHT KNEE.

INJURY WAS REPORTED TO THE SUPERVISOR ON SEPT 9,2000. THE EE STATED HE DID NOT WANT TO SEE A DR. BECAUSE THE PAIN WAS NOT THAT SEVERE. DUE TO INCREASE IN PAIN THE EE WAS TAKEN TO THE DR. ON 10 -10-00. DR. DIAGNOSED SPINE SPRAIN AND INSTRUCTED EE TO TAKE TIME OFF WITH MEDICATION.

EMPLOYEE WAS LIFTING CHIPPING GUN & PULLED LEFT FINGER.

EMPLOYEE WAS COMING DOWN THE STAIRWAY IN THE PREHEATER TOWER AND TWISTED LEFT KNEE.