Search the record

Employees finger was pinched in a safety gate causing laceration.

Fueler lost grip of hose while retracting, allowing end of hose to strike their face.

An employee was in the process of re-inserting HQ split tube into a core tube. During the task, the split encountered ice inside of the tube and the employees hand slipped while applying pressure to the split tube. the sharp edge of the frozen split tube sliced through the employee's glove, resulting in a laceration to the employees left thumb.

Driver statement: The tarp was in a bind, driver climbed up on the front of the trailer to help work the tarp over whatever it was hung up on. Where the tarp pole connected to the motor, it broke loose, and struck my finger.

While IP was lifting drill rod to string, the rod slipped. IP reached down to grab rod and placed finger under pin end of rod pinching between box end and pin end of rod.

Placing wheel chocks into pickup truck, swinging a bit too much and feeling pain in lower back.

Operator placed thumb in pinch point while attempting to move forks on telehandler .

Maintenance door swung closed and hit mechanic in the face.

Miner was attempting to lift a nitrogen cylinder into the back of a service truck, when the cylinder slipped and pinched the miner's fifth finger between the cylinder and the edge of the service truck work bench.

When removing a shackle from a tote lifter, the lifter shifted pinching the employees finger.

While attaching wear iron to a dozer blade a piece slipped pinching mechanic's finger

While stowing an A frame ladder mechanic pinched finger

Operator was lifting a cover to close a ball valve, when the lid slipped out of their hand causing the lid to pinch index finger.

While attempting to remove a rock from the push arm of a rubber tire dozer the operator felt a strain in right arm.

Mechanic removed new ripper tip from rack and went to place the ripper tip in the service truck when mechanics finger was pinched between the ripper tip and tailgate.

While driller was changing a hammer it became entangled in the collar on the deck and when the hammer broke loose the employee got their finger caught in the jib hoist line causing a laceration.

Mechanic pinched finger while removing light bracket from a dozer.

Mobile equipment mechanic was loading 5600 shovel teeth onto service truck, the mechanic slid one shovel tooth over to make room for the additional shovel teeth, in doing so the shovel tooth slid on the frosty deck and pinched mechanic's left pinky finger against the truck mounted vice, causing a laceration which required three sutures.

While positioning a steel plate, the operators hands slipped and the plate fell on their foot.

Operator pinched finger between drill and bit basket

After lifting a wheel chock employee felt an irritation in the right shoulder.

Technician was tightening a bolt for a hose clamp under a 793F Truck, when dust fell and hit near their right eye. They felt debris enter the eye, so they proceeded to flush eyes several times. The debris was unable to be removed locally, so they were treated at a local clinic for removal.

While manually moving a pogo (scissor lift) the employee slipped and fell causing the lift to fall on their leg.

While working to remove the lower corner liner of a mill, a corner liner above slid down impacting employees fingers.

Employee was carrying a chain jack, lost grip, re-grabbed the jack hitting two top front teeth with the top end of the jack resulting in both teeth being replaced on 4/13/2017.

Employee pinched finger while stacking track pads.

While spinning a belt on a pump sheave finger was contacted between the belt and the sheave.

While lifting a shift cylinder employee felt a strain in wrist.

Over-liner Aggregate collection - samples carried via 5 gallon buckets (70-80lbs) being walked to pickup truck without assistance (mechanical or human). Did not report injury until 10/10/2016.

Welder was welding 30" pipe and needed to adjust pipe. Fire watch, injured worker tried to manually roll the pipe to complete weld. After lunch the injured worker complained of back soreness. He was taken to clinic for back pain.

Steel fell on to the employees left foot causing injury to the top of the left foot.

A blast hole driller was placing a drill bit in the holder and pinched the tip of the pinky finger on the left hand.

Employee were working on installing pump and landing plate fell and contacted thumb.

While re-threading a pull down chain on a drill, the employee strained their lower abdomen.

Installing final drive on 769 lube truck and pinched end of right thumb between final and cooling line.

While attempting to remove a torque converter housing the mechanic strained their right shoulder.

Employees hand slipped while tapping holes on a track frame causing a minor laceration.

When climbing up an equipment access ladder, the ladder bracket caught the persons knee.

While changing drill tooling- driller had finger caught in pinch point.

Dewatering personnel was on the ground near the area where a decommission electric cable was being moved when the cable stuck him in the lower leg.

While clearing poured slag from a table, a piece cracked as it cooled, throwing a small piece at the employee. The piece passed under the employee's safety glasses, striking him in the right eye. The employee received a corneal abrasion to the right eye.

Tech was looking for device next to door as she walked in and the door closed faster and harder than expected and left fingertips were caught in door. The door had an oversized closure spring because of strong winds. Skin and fingernails were torn and bones of fingertip later diagnosed as fractures.

Individual was removing chock blocks from his truck. He dropped one onto his right foot immediately behind his steel toe. Individual received a fracture to his right 5th toe.

After using a ban saw employee had metal shavings on his glove. He removed his safety glasses to itch his eye. When his eye started bothering him he washed it out. Later that night it continued to bother him so he went to the hospital where they removed a piece of metal.

EE was adding drill pipe to drill load rack, load was not centered when picker from magazine and swung out pinching his little finger.

A scrap steel bar was left on a cutting table after not being used. I placed a small piece of 1/4" plate on the table. The vibration caused the steel bar to fall on my steel toe boots. I received 3 stitches on a small cut on the toe, and a fracture on the knuckle of the big toe.

Person was assisting with retrieving a water pump from a well. Pump wire unravelled from tooling catching person's hand between wire and well casing.

Employee was hooking up light plant to back of truck manually when the lamp plant fell pinching finger between tung and light duty pickup hitch/tailgate. Resulted in scraping and potential tendon injury of left ring finger (center knuckle). No broken bones.

Ramming tool fell on employee's right foot.

While sliding a heavy object employee felt a sharp pain under his right shoulder blade.