Search the record

CHIPPING FEED CHUTE WITH CHIPPING HAMMER. METAL PARTICLE IMBEDED IN RIGHT EYE.

HAND HIT WITH SLEDGE HAMMER.

EMPLOYEE WAS USING EXCESSIVE FORCE TO CLOSE REFURBISHED HOPPER DOOR. WHILE DOING SO, LINING BAR SLIPPED AND EMPLOYEE JAMMED WRIST.

EE STATES HE WAS HAMMEIRNG ON A TIE ROD USING A HAMMER AND PIN EXTENSION. HE MISSED WHILE HAMMERING AND CONSEQYUENTLY HIS RIGHT FINGER STRUCK THE PIN.

CUTTING A PIECE OF FLASHING. KNIFE SLIPPED AND CUT THUMB.

EE WAS INSTALLING A BEARING ON TAIL PULLEY ON CONVEYOR WITH RATCH COMLONG TO ADJUST SHAFT BACK. COMELONG CABLE BROKE CAUSING LIFT INDEX FINGER TO BPINCHED BETWEEN BEARING HOUSING AND FRAME OF CONVEYOR.

PRYING AGAINST A SCREEN.

EMP WAS PUNCHING BOLTHOLES IN RUBBER LAGGING FOR A BELT WIPER WHEN THE PUNCH SLIPPED, CAUSING THE HAMMER HEAD TO STRIKE LEFT THIRD FINGER.

CUTTING PIECE OF CONVEYOR BELT WITH UTILITY KNIFE WHEN IT SLIPPED, CUTTING RIGHT LEG. SUTURES.

EE WAS CUTTING ON A PIECE OF CONVEYOR BELT WHEN HE SCRAPED HIS ELBOW ON THE BELT, AGGRAVATING BONE SPUR CAUSING FLUID TO ACCUMULATE.

EE WAS INSTALLING A GUARD ONT HE TAIL PULLEY WHEN HE STRUCK HIS THUMB WITH A HAMMER.

HOLDING SLEDGE HAMMER, FINGER PINCHED.

EE STATED HE WAS HITTING SEGMENTS OF DOZER WHEN A PIECE OF METAL FROM THE SEGMENT BROKE OOF AND WENT INTO HIS LEG

CLEANING HEAD CHUTE WITH REBAR. MATERIAL BROKE LOOSE AND HIT REBAR, CAUSING IT TO HIT RIGHT INDEX FINGER.

REMOVING COATING FROM #1 KILN WHEN ANOTHER PIECE OF COATING HIT PRY BAR. BAR HIT AND CUT RIGHT FINGER.

CUTTING A PIECE OF RUBBER WITH KNIFE, KNIFE SLIPPED & CUT LEG [1 STITCH]

EMPLOYEE STATES HE INJURED HIS FINGER WHEN THE WRENCH HE WAS USING TO HOLD BOLTS FROM SPINNING SPUN AROUND AND CAUGHT HIS LEFT FINGER BETWEEN THE WRENCH AND THE MOUNTING BRACKET OF THE SEAT.

CUTTING A PIECE OF RUBBER.

EE STATES HE WAS IN A KNEELING POSITION DRIVING A SECTION OF CHANNEL INTO POSITION WITH A HAMMER WHEN THE HAMMER GLANCED OFF THE CHANNEL, STRIKING HIS FINGER AGAINST THE HAMMER HANDLE.

BREAKING STUDS OFF BELT CLIP. TOOL BROKE CAUSINGARM TO MOVE AND BE PUNCTURED BY STUD. SUTURES REQUIRED/

EE STATES HE WAS CUTTING A RUBBER LINER WITH A KNIFE WHEN THE KNIFE WENT THROUGH THE LINER AND CONTACTED THE EE.

WORKING ON A CRUSHER, JACK HANDLE FELL ON HAND.

USING BAR WHILE WORKING ON DRIVE LINE. BAR SLIPPED AND HIT LEFT INDEX FINGER. SUTURES.

TIGHTENING BOLTS ON SCREEN DECK.

CUT LEG WHILE CUTTING RUBBER BELTING WITH UTILITY KNIFE.

CUTTING LID OFF PLASTIC BUCKET WITH KNIFE.

USING A HAMMER & CHISEL. FELT SOMETHING IN EYE. FOREIGN OBJECT IN EYE.

EMPLOYEE STATES HE SLIPPED OFF OF A PIPE WRENCH AND STRUCK HIS FOOT ON THE GROUND.

EE WAS DRIVING A NEW BEARING ONTO A TAIL PULLEY SHAFT. HE WAS HOLDING THE TAIL PULEY WITH HIS LEFT HAND AND HAMMERED WITH HIS RIGHT A SMALL PIECE OF STEEL BROKE OFF THE BEARING AND ENTERED HI S LEFT ARM. ABOVE HIS LEFT WRIST.

SPLICING CONVEYOR BELT ON #3 STACKER AND CUT RIGHT KNEE WITH KNIFE.

CHANGING HAMMERS ON CECO CRUSHER AND HIT HIS KNEE WITH A HAMMER.

WHILE ATTEMPTINN TO OPEN BOX-KNIFE CUT HIS RIGHT THUMB. *SUTURES*

SHOOTING ASH RING & FELT PAIN TO LOWBACK AFTER RAKING BUILDUP LIGHT DUTY BEGAN 01-04-95

CHANGING BELT AND CUT BASE OF LEFT THUMB WITH RAZOR KNIFE. SUTURES PLACED.

HE WAS CLEANING SLAG WITH CHIPPING HAMMER UNDER J DISK CRUSHER- A PIECE OF STEEL LODGED IN LEFT EYE.

EMPLOYEE WAS ATTEMPTING TO CUT A TIE ON A DRIVE CABLE WITH A KNIFE. WHEN THE TIE BROKE THE KNIFECAUGHT HIS THUMB. SUTURES PLACED.

PULLING A PIECE OF PIPE AND IT WAS STUCK. PRY BAR CAME LOOSE AND HIT EE ABOVE RIGHT EYEBROW.

TIGHTENING BOLTS ON WATER PUMP AND FELT STRAIN TO LOW BACK.

RAKING ASH WHILE SHOOTING ASH RING. FELT "POP" RIGHT SHOULDER.

ADJUSTING THE JACK & THE JACK FAILED WHICH HIT HIS HAND JACKING MENGANMESE FOR CRUSHER THE MANAGANECE SLIPPED & IT CAUGHT HIS HAND BETWEEN THE MANGANESE & THE CRUSHER

EMPLOYEE STATES HOOK CAME LOOSE FROM ROPE AND HOIST SCREEN FLIPPED OVER ON HIS LEFT ARM.

PULLING COATING CHUNKS FROM KILN WITH RAKE. RAKE CAUGHT ON GRATES AND CAUSED A MUSCLE PULL IN NECK.

INJURED TO INDEPENDENT CONTRACTOR- CENTER SERVICE COMPANY. INSTALLING A GROUND ROD- PUNCTURE WOUND FROM ROD BEING DRIVEN INTO GROUND.

HOLDING BOTL HEAD WITH THE GLOVED HAND-BOLT TURNE DWHILE TIGHTENING NUT. CUT TWO FINGERS 2 STITCHES..

EMPLOYEE STATES HE WAS REMOVING BROKEN BOLTS FROM MOTOR BASE & A PIECE OF FOREIGN MATERIAL WENT AROUND HIS GLASSES & INTO HIS LEFT EYE.

BREAKING COATING BALLS WITH A SLEDGE HAMMER. TASK WAS BEING PERFORMED AT THE DISCHARGE END OF 2 COLLER. WHILE BENT OVER, SWINING HAMMER, STRAINED MUSCLES IN LOWER BACK.

EMPLOYEE STATES HE WAS TAKING OLD BELTS OFF DRIVE PULLEY WHEN THE SCREWDRIVER SLIPPED CAUSING HIS FINGER TO BE PINCHED BETWEEN BELT & PULLEY.

WHILE RAKING A COATING AT A #2 COOLER THE EMPLOYEE PULLED A MUSCLE IN HIS BACK.

ROCK STRUCK EMPLOYEE'S FINGER WHILE PRYING. MIDDLE FINGER OF RIGHT HAND.

EE STATES HE WAS CUTTING RUBBER SKIRTING WHEN THE RAZOR KNIFE SLIPPED ANC CUT THE BOTTOM SIDE OF HIS LEFT WRIST.