Search the record

THIS EMPLOYEE WAS REMOVING INSULATION FROM AN ELECTRIC CABLE WITH A POCKET KNIFE. THE KNIFE SLIPPED AND CUT HIS RIGHT THUMB.

THIS EMPLOYEE INJURED HIS LEFT ELBOW WHILE CHANGING TIRES WITH A SLEDGE HAMMER. IT BECAME REPORTABLE WHEN SURGERY WAS REQUIRED, AND THE INJURY WAS DETERMINED TO BE WORK RELATED.

THIS EMPLOYEE WAS TIGHTENING TRACK BOLTS WITH A WRENCH. THE WRENCH SLIPPED OFF OF THE NUT. THE EMPLOYEE FELT A PAIN IN HIS LEFT SHOULDER. ON 4-20-94 SHOULDER SURGERY WAS PERFORMED.

EE WAS CHANGING A TIP ON THE MECHANICAL SCALER WHILE DRIVING IN THE PIN A PIECE OF METAL CAME OFF HAMMER AND EMBEDDED IN LEFT ARM.

THE EMPLOYEE APPARENTLY STRAINED HIS BACK WHILE HOLDING A WRENCH AND EXTENSION AS OTHER EMPLOYEES TIGHTENED BOLTS WITH A TORQUE MULTIPLYING WRENCH.

THIS EMPLOYEE WAS OPERATING A PORTA-POWER UNIT WHEN THE FOOT CONTROL VALVE STUCK OPEN. THIS ALLOWED THE CYLINDER TO RETRACT AND FALL. IT STRUCK THE EMPLOYEE'S LEFT HAND.

A FLAT ROCK PLUGGED THE CHUT EBETWEEN #1 BELT AND THE ROBBINS SCREEN. INJURED AND CO-WORKER WERE CLEARING THE CHUTE FROM THE WALKWAY #1. INJURED WAS STANDING AT A 45 DEGREE ANGLE TO THE CONV EOYR. THE SCALING BAR WAS DRIVEN INTO THE HANG UP AND INJURED PULLED HARD ON THE BAR. APPARENTLY THE BAR CAME BACK FURTHER THAN HE EXPECTED, CAUSING HIM TO LOSE HIS BALANCE AND FALL BACKWARD

THIS EMPLOYEE STRAINED HIS BACK AS HE PULLED RAILROAD TRACK SPIKES WITH A SPIKE PULLER.

THIS EMPLOYEE CUT HIS LEFT INDEX FINGER WITH A POCKET KNIFE WHEN HE CUT THROUGH A NYLON TIE STRAP.

54730CUT LEFT THUMB WITH A POCKET KNIFE WHEN THE BLADE CLOSED. TRYING TO BORE A HOLE IN A LOG BOOK.

JULY 16 INJURED WAS TIGHTENING A BOLT WHILE REBUILDING ENGINE. HE DID NOT SEEK MEDICAL ATTENTION UNTIL AUGUST 13 DIAGNOSIS WAS RECEIVED FROM DR DATED 10-12-92 STATING THAT INJURED HAD SUFFERED TENDONITIS RIGHT HAND.

BEATING ON COUPLING WITH HAMMER PC OF STEEL PUNCTURED R THIGH

EMPLOYEE STRUCK CHISEL WITH HAMMER IN AN ATTEMPT TO LOOSEN ARTICULATION PINS. METAL CHIP FLEW OFF CHISEL AND IMBEDDED ITSELF IN THE EMPLOYEE'S LEFT THIGH.

EMPLOYEE WAS UNCOUPLING RAILCAR HITCHES WITH A PRY BAR HE ALLOWED THE BAR TO SLIP HIS LEFT ARM STRUCK A RAILCAR CAUSING A BRUISE

EMPLOYEE STRAINED SHOULDER WHILE SCALING ROCK

EMPLOYEE AND DOCTOR ALLEGE THAT USING WRENCHES CAUSED A GANGLION CYST TO FORM ON THE EMPLOYEE'S RIGHT THIRD FINGER. HE LIST TIME ON MAY 17 WHEN HE HAD SURGERY.

EMPLOYEE STABBED HIMSELF WITH A POCKET KNIFE WHEN HE ATTEMPTED TO CUT A PLASTIC TIE FROM HOSES.

INJURED AND CO-WORKER WERE CHANGING A HYDRAULIC HOSE ON A SURFACE FRONT END LOADER. INJURED WAS TIGHTENING A FITTING WHEN HE FELT A PAIN IN HIS BACK.

AS THIS MAN SCALED A ROCK, THE BAR BROKE OUT OF THE ROCK AND HIS THUMB HIT THE BACK. HE DID NOT SEEK MEDICAL ATTENTION UNTIL 11-14-90.

EMPLOYEE WAS REMOVING A PLASTIC SCREEN FROM SCREEN DECK BY CUTTING WITH KNIFE. THE KNIFE SLIPPED AND STRUCK THE EMPLOYEE'S HAND.

EMPL WAS SECURING DRILL MOTOR TO SLIDE WHEN MOTOR SUPPORTED BY CHAIN SLIPPED ON CHAIN. RIGHT RING FINGER WAS CAUGHT BETWEEN MOTOR & SLIDE.

EMPLS BACK BEGAN TO HURT WHILE SCALING.

INJURED WAS BARRING ROCK AT CRUSHER SHE SAID SHE DIDNT FEEL ANY SUDDEN PAIN BUT HER LEFT ARM STARTED HURTING AT APPROX 08:30PM & PAIN WORSENED AS SHIFT PROGRESSED

BARRING HUNG ROCK AT FEEDER ROCK CAME LOOSE CAUSING GROUND BAR TO MOVE UP SMASHING HAND BETWEEN BAR AND STEEL

EMPLOYEE HIT A PIECE OF STEEL ON DRILL CENTRALIZER WITH HAMMER.SLIVER BROKE OFF AND IMBEDDED INTO HIS ARM.

EMPLOYEE WAS ASSISTING SECOND EMPLOYEE WHO WAS STRIKING A SWING CYLINDER PIN. A METAL SLIVER FLEW OFF AND STRUCK EMPLOYEE'S LEFT EYEBROW. THE SLIVER WAS REMOVED ON 11/15/89. THE ACCIDENT WAS N OT REPORTED UNTIL NOVEMBER 17, 1989.

INJURED WAS HOISTING 3-TON FAN MOTOR WITH CHAIN FALL HOIST. AS HE WA SPULLING ON HOISTING CHAIN HE FELT PAIN IN NECK.

EMPLOYEE STRUCK A BROKEN DRILL COUPLING WITH HAMMER. A STEEL SLIVER FLEW OFF AND STUCK HIS LEFT ARM.

STRA2NED ELBOW WHIEL SCALING.

WHILE SCALING A ROCK THIS EMPLOYEE FELT A PAIN IN HIS RIGHT FOREARM.

THIS MAN WAS HELPING ANOTHER MAN CHANGE ROLLERS ON MAN CAGE RUST CAME OFF OF A NUT AND ENTERED HIS EYE.

THIS MAN WAS CUTTING THE SIDE SHIELDS OFF OF A PAIR OF SAFETY GLASSES IN THE CHANGE HOUSE WHEN HIS KNIFE SLIPPED AND HE LACERATED HIS LEG.

BREAKING A BOLT OFF OF A MOTOR WITH A WRENCH AND WHEN IT BROKE HIS LEFT HAND WAS PULLED BACK INTO MOTOR AND BUMPED

THIS MAN WAS USING A PORTA POWER HYDRAULIC RAM TO REMOVE A PIN FROM A LOADER BUCKET BOOM. A FELMALE FITTING ON THE RAM SPLIT IN HALF ALLOWING THE HOSE END TO STRIKE THE MAN N THE RIGHT SIDE OF THE JAW.

WHILE SCALING THIS MAN PULLED A MUSCLE IN HIS RIGHT UPPER ARM. AFTER TWO WEEKS OF LIGHT DUTY HE WAS TOLD BY A DOCTOR TO STAY OFF WORK AND WAS SENT TO A SPECIALIST.

THIS MAN WAS SC5LING OFF OF A MUCK PILE. HE STEPPED BACKWARDS AND STRUCK HIS RIGHT ANKLE AGAINST A SHARP ROCK WHICH CUT THROUGH HIS BOOT, LACERATING HIS ANKLE.

THIS MAN SCALED3A LARGE ROCK OFF OF THE FACE OF A LIFT WHICH SLID TOWARD HIM. HE DEFLECTED THE ROCK WITH HIS SCALING BAR AND SPRAINED HIS LEFT WRIST.

WHILE REMOVING 7HE BOLTS T O A FILT RATE PUMP COUPLING WITH A RATCHET WRENCH THIS MAN STRAINED A MUSCLE IN HIS LOWER BACK

THIS MAN WAS T9YING TO ALIGN A CONNECTION I NA TRACK RAIL WITH A THREE POUND HAMMER WHEN HE STRUCK HIS LEFT THUMB WITH THE HAMMER

THIS MAN WAS SC5LING A PILLAR WHEN A SMALL ROCK SLID DOWN HIS SCALING BAR AND STRUCK THE FRONT OF HIS ELBOW CAUSING A LACERATION.

THIS MAN WAS PR2ING WITH A SCALING BAR TRYING TO PULL DOWN A SLAB AND STRAINED A MUSCLE IN HIS SHOULDERS AND NECK

THIS MAN WAS TI1HTENING A BOLT ON A SCALING MACHINE STINGER WHEN THE BOLT BROKE AND THE MAN FELL INJURING HIS BACK.

THIS MAN AND A 7O WORKER WERE TRYING TO SCALE DOWN A SLAB WHEN HIS SCALING BAR BROKE LOOSE CAUSING HIM TO FALL BACKWARDS AND LACERATE HIS RIGHT WRIST.

THIS MAN RECEIV9D FOREIGN MATERIAL IN HIS LEFT EYE WHICH EMBEDDED ON HIS CORNEAL WHILE HE WAS SCALING.

MAN WAS USING A3WRENCH WHICH SLIPPED CAUSING HIM TO MASH THE LITTLE FINGER OF HIS RIGHT HAND

THIS MAN WAS HO5DING A PIN DRIVER WHILE A COWORKER STRUCK THE DRIVER WITH A HAMMER.THE HAMMER GLANCED AND STRUCK THE MAN ON HIS LEFT INDEX FINGER.

THIS MAN WAS CU7TING A HOLE IN A CONVEYOR BELT WHEN HIS POCKET KNIFE FOLDED UP ON HIS THUMB AUSING A LACERATION.

THIS MAN WAS TR2ING TO REMOVE A BAND OFF A SECTION OF RUBBER HOSE WITH SCREWDRIVER THE SCREWDRIVER SLIPPED AND THE MAN PUNCTURED RT HAND REQUIRING SUTURES FOR CLOSURE

DURING A RAIL H5ULAGE TRACK REPAIR JOB, THIS MAN WAS PUSHING DOWN ON THE HANDLE OF A HYDRAULIC JACK TRYING TO LIFE A RAIL AND PULLED MUSCLE IN HIS LOWER BACK.

MAN DRIVING MET5L BUSHING WITH 4 LB HAMMER WHEN PIECE OF METAL FLEW OFF BUSHING EMBEDDED INTO LEFT LOWER LEG.